Steel table legs 27-3/4 inch chrome 653-7S-C1

Steel Table Legs For Sturdy Work Surfaces

Steel table legs from the Peter Meier Studio Series give you a steel support solution with a 660 lb. per leg load bearing capacity, so one leg can handle heavy work surfaces where high static loads are common. Each leg is built from steel with a 2 inch diameter, which creates a compact footprint while still providing substantial strength for benches and tables. The leg height of 27-3/4 inches is designed for standard table-height applications, helping work surfaces line up with other furniture in the same run. A chrome finish on the table leg provides a clean metallic look that coordinates with many hinges, pulls, and other visible hardware. The Camar branding and 653-7S-C1 part number give you a consistent reference when matching legs across multiple projects or specifying replacements later.

Key Steel Table Leg Details That Matter

• The 660 lb. per leg load bearing capacity supports heavy tops, so one steel table leg can carry substantial weight on work surfaces and tables without overbuilding the understructure.
• The 2 inch diameter steel construction concentrates strength in a relatively small column, which helps maintain legroom and clearance under work surfaces while still resisting deflection.
• The 27-3/4 inch leg height targets table-height installations, so finished surfaces align well with typical desk and table ergonomics in offices, shops, and residential spaces.
• The chrome finish gives the steel table leg a bright, metallic appearance that ties in with other chrome components, which helps projects maintain a consistent visible hardware look.
• The Peter Meier Studio Series designation identifies this as part of a premium line of steel table legs, helping you standardize across projects that require the same performance and appearance.

Adjustment And Mounting For Table-Height Setup

Each steel table leg has 7 inches of adjustment built into the foot, so you can adapt a 27-3/4 inch starting height to uneven floors or specific finished heights without custom cutting. The built-in adjustment simplifies leveling across multiple legs on one work surface, because the fine-tuning happens at the foot instead of at the mounting end. A separate bracket is used to attach the leg to the table, creating a defined interface between the steel column and the underside of the top. This bracket-based connection helps position the 2 inch diameter leg accurately at corners or inboard locations and supports repeatable layouts across multiple identical tables.

Using Studio Series Legs In Work Surfaces

Where These Chrome Steel Table Legs Fit Best

The Camar steel table legs in the Peter Meier Studio Series are categorized under Work Surface & Tables, so they are intended for supporting work surfaces, tables, and similar horizontal tops. With a 27-3/4 inch height, these legs align with standard table-height builds used in offices, meeting rooms, shops, and residential spaces. The 2 inch diameter steel tube format allows these legs to sit at corners or along edges without dominating the design, which is useful when knee space and chair clearance are priorities. A chrome finish lets the leg act as a visible design element in open-base tables where the support structure is fully exposed. The 660 lb. per leg load bearing capacity supports use under thick tops or dense materials, so a four-leg layout can handle demanding static loads in many interior applications.

Details That Support Level, Repeatable Installations

The 7 inches of adjustment built into the foot give each steel table leg a wide leveling range, which is especially useful when floors vary in height across a room. That built-in adjustment means the nominal 27-3/4 inch leg height can be tuned on site, allowing one leg type to serve slightly different finished surface heights within a project. The separate bracket that attaches the leg to the table defines a fixed mounting footprint, helping installers reproduce the same setback and orientation on multiple tops. Because the Studio Series is identified as a premium line of steel table legs, you can reference the same 653-7S-C1 part number whenever you need to match existing chrome legs with 2 inch diameter and 7 inch adjustable feet. Keeping the same model across builds helps align visual details, loading capability, and adjustment behavior from one installation to the next.

Common Questions About Camar 653-7S-C1 Legs

Selecting This Steel Leg For Your Next Surface

The Camar steel table legs from the Peter Meier Studio Series combine a 2 inch diameter steel column, 27-3/4 inch table-height design, and 7 inches of foot adjustment to handle varied work surface conditions. A 660 lb. per leg load bearing capacity supports demanding tops, while the chrome finish keeps the support visible and consistent with other metal components. Using the 653-7S-C1 part number across projects helps standardize appearance, strength, and adjustment behavior whenever a steel table leg is needed under work surfaces and tables.