Steel table legs 7 inch adjustment chrome

Steel Table Legs With 7 Inch Adjustment

Steel table legs 7 inch adjustment define this Camar leg from Peter Meier's Studio Series as a problem-solver for work surfaces that need fine height tuning. The 34-1/4 inch height and 7 inch adjustment built in the foot let you adapt to different finished surface heights, which matters when aligning new tops with existing cabinetry or equipment. The 2 inch diameter steel construction provides a compact footprint while still supporting a load bearing capacity of 660 lb per leg, which helps when supporting heavy tops or concentrated loads. The chrome finish gives the leg a clean, bright look that coordinates with other chrome components in shop or commercial settings. As part of the Studio Series premium line, this leg is designed for demanding work surface and table applications where adjustment range and load capacity are both critical.

Key Details That Support Work Surface Projects

• The 660 lb load bearing capacity per leg handles heavy work surfaces or equipment, which supports confident layout on large tops without overbuilding the base.
• The 7 inch adjustment built in the foot lets you raise or lower the leg within a generous range, which simplifies aligning tops across uneven floors or mixed cabinet heights.
• The 2 inch diameter steel tube concentrates strength into a small footprint, which helps when you need strong support without taking up extra clearance under the work surface.
• The 34-1/4 inch nominal height targets standard table and work surface builds, which streamlines planning when matching common sitting or working heights.
• The chrome finish on the steel leg offers a bright, clean appearance, which suits exposed table bases in offices, shops, or commercial spaces that require visible hardware.
• The separate bracket used to attach the leg to the table creates a defined connection point, which supports consistent mounting across multiple legs on the same top.

Adjustable Chrome Table Leg Mounting And Fit

This Camar steel table leg uses a separate bracket to attach the leg to the table, so the connection is defined by that bracket rather than direct fastening into the tube, which supports consistent positioning on each leg. The 34-1/4 inch height works toward typical table applications, and the 7 inch adjustment built in the foot gives substantial vertical play, which is useful for dialing in final height after the top is set. The 2 inch diameter profile works with the matching sleeve that covers the extension, so even when you use the adjustment range, the leg maintains a unified chrome appearance from top to floor.

How This Steel Table Leg Works In Use

Where This 34-1/4 Inch Chrome Leg Fits Best

The Studio Series chrome leg fits work surface and table projects that fall into the 34-1/4 inch overall height range, because that base height combined with 7 inch adjustment built in the foot lets you adapt to various top thicknesses. The 660 lb load bearing capacity per leg supports heavy countertops, equipment benches, or large tables where each support may see substantial point loading. The 2 inch diameter design suits layouts where you need strong support without occupying too much under-table space, which helps maintain knee room or storage access beneath the work surface. As a steel table leg from Peter Meier's Studio Series, it is positioned for demanding work surface and table installations that call for both capacity and adjustability in a visible, finished component.

Adjustment And Details That Support Repeatable Results

The 7 inch adjustment built in the foot allows the installer to fine-tune final height from a fixed 34-1/4 inch base, which simplifies leveling across uneven floors or tying into existing cabinetry at slightly different elevations. The leg incorporates a matching sleeve to cover the extension, so when you extend the foot within that 7 inch range, the exposed section is concealed, which maintains a clean chrome column from bracket to floor. The separate bracket used to attach the leg to the table sets a consistent mounting geometry from leg to leg, which reduces layout variation across multi-leg installations. The combination of 2 inch diameter steel construction and 660 lb load bearing capacity per leg provides a clear structural margin for many work surface designs, which helps when standardizing on one leg style across several table or bench configurations.

Common Questions About This Camar Studio Leg

Choose This Adjustable Steel Leg For Demanding Tops

The Camar Studio Series steel table leg pairs a 34-1/4 inch height with 7 inch adjustment built in the foot, which supports precise final height on a wide range of tops. The 2 inch diameter steel construction and 660 lb load bearing capacity per leg provide strong, compact support for heavy work surfaces. With a chrome finish and a separate bracket that attaches the leg to the table, this leg suits exposed bases where appearance and repeatable mounting both matter. Use this leg when you need a single, adjustable chrome support solution across multiple table or work surface builds.