
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Steel table legs 34-1/4 inch from Camar give a fixed table-height solution that combines a steel construction with a built-in adjustable foot, so work surfaces stay at a practical height even when finished tops vary in thickness on site. Each leg belongs to Peter Meier's Studio Series, which is described as a premium line of steel table legs with a load bearing capacity of 660 lb. per leg, so a single leg can carry substantial weight where heavy work surfaces or equipment are used. The leg has a 2 inch diameter, which creates a compact footprint that still supports the stated load capacity in tight layouts such as workstations or benches. The matte black finish on the leg provides a neutral appearance that blends with many work surface designs, which helps when tying multiple stations into one project.
The Camar steel table leg is specified at 34-1/4 inches in height, which positions a typical work surface at table height once the top is installed, keeping working positions consistent across similar jobs. Legs in the Studio Series have 7 inches of adjustment built in the foot, so the installer can extend or retract the foot within that range to adapt the total support length to uneven floors or varying top thicknesses. The adjustment is located in the foot rather than in the tube, which keeps the main tube visually fixed while fine-tuning the actual support height where the leg meets the floor. The leg uses a 2 inch diameter profile, which leaves more room near corners and chair positions while still delivering the stated load bearing capacity.
The Camar Steel Table Legs, 7 inch Adjustment 2 inch Diameter, 34-1/4 inch Height, Matte Black, are positioned in the work surface and tables category and the table legs product class, so their role is vertical support under tables, counters, or workstations. The leg height of 34-1/4 inches places it within the typical table-height range, which suits applications such as freestanding tables, workbenches built to table height, or add-on work surfaces that must align with existing tables. The 2 inch diameter keeps the support visually slim, which works well along table edges where users sit or move chairs. The matte black finish coordinates with other matte black components, which can tie together bench frames and leg supports across a larger workspace.
Peter Meier's Studio Series legs provide a load bearing capacity of 660 lb. per leg, which allows each Camar steel table leg to support heavy tops, tools, or materials while staying within the stated rating at each support point. This capacity is especially relevant on long tables where multiple legs share the load, because you can plan leg spacing around the per-leg rating. The legs have 7 inches of adjustment built in the foot, so the installer can fine-tune height to compensate for sloped or irregular floors without altering the main tube length. This foot-based adjustment keeps the visible tube consistent from leg to leg, which maintains a uniform look around the perimeter while still leveling the work surface accurately. Together, the 2 inch diameter profile, 34-1/4 inch height, and 660 lb. per leg capacity align the leg with demanding work surface projects where both alignment and load handling are important.
The Camar Steel Table Legs have a specified height of 34-1/4 inches, which positions table-height work surfaces at a consistent level once the top is added over the leg structure.
Each Peter Meier Studio Series steel table leg has a load bearing capacity of 660 lb. per leg, which supports heavy tops or equipment where substantial vertical loading occurs.
The Studio Series leg has 7 inches of adjustment built in the foot, which lets you vary the support length within that range to level work surfaces on uneven floors.
The Studio Series steel table leg uses a 2 inch diameter, which concentrates the stated load capacity into a compact profile that fits under narrow or crowded work surfaces.
This Camar steel table leg is supplied in a matte black finish, one of three finishes available in the Studio Series, which helps coordinate with other matte black components.
This matte black Studio Series leg corresponds to manufacturer part number 653-9S-19, which ties ordering and project documentation to the specific 34-1/4 inch, 2 inch diameter model.
The Camar Steel Table Legs, 7 inch Adjustment 2 inch Diameter, 34-1/4 inch Height, Matte Black, provide a steel support with a 660 lb. per leg load bearing capacity, so individual legs can handle demanding work surfaces. The 2 inch diameter and 34-1/4 inch table-height design fit workspace applications where compact supports and standard heights are needed. With 7 inches of adjustment built in the foot, the leg adapts to irregular conditions while keeping the main tube consistent in appearance. For work surface and table projects that call for these specific dimensions, finish, and capacity, this Studio Series leg is configured to match those requirements.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Set | CM653-70-ST Mfr# 653-70-ST | Steel table legs 27-3/4 inch brushed steel | ||||
Sold in: 1 Each | CM653-7S-19 Mfr# 653-7S-19 | Steel table legs, 27-3/4 in, matte black | ||||
Sold in: 1 Each | CM653-7S-C1 Mfr# 653-7S-C1 | Steel table legs 27-3/4 inch chrome 653-7S-C1 | ||||
Sold in: 1 Each | CM653-7S-ST Mfr# 653-7S-ST | Steel table legs 7 inch adjustment brushed steel | ||||
Sold in: 1 Each | CM653-9S-C1 Mfr# 653-9S-C1 | Steel table legs 7 inch adjustment chrome | ||||
Sold in: 1 Each | CM653-9S-ST Mfr# 653-9S-ST | Steel table legs 7 inch adjustment 34-1/4 inch | ||||
Sold in: 1 Set | CM653-70-C1 Mfr# 653-70-C1 | Steel table legs 27-3/4 inch chrome Camar | ||||
Sold in: 1 Set | CM653-70-19 Mfr# 653-70-19 | Steel table legs, 27-3/4 in, matte black |