Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Berenson Echo cabinet pull in polished nickel gives cabinet doors and drawers a consistent modern look using a defined 3-3/4 inch center to center mounting span. This center to center dimension sets hole spacing so each pull lines up evenly across a run of fronts. The pull uses zinc material, which provides a solid feel while keeping weight manageable during layout and mounting on multiple cabinets. A polished nickel finish reflects light, helping fronts read brighter while matching other polished nickel decorative hardware and moldings in the same space. Overall length of 5-9/16 inches extends past the mounting holes, creating defined grip points on both sides of the hand position. Projection of 1-1/4 inches keeps fingers clear of the cabinet face when opening, which supports comfortable use on frequently accessed doors and drawers.
The Berenson Echo pull is defined by a 3-3/4 inch (96 mm) center to center distance, so installers can use standard cabinet drilling jigs set to this span for repeatable results. Overall length of 5-9/16 inches allows the pull to reach closer to drawer or door edges, which can help with leverage on wider or heavier fronts. With a 1-1/4 inch projection, the pull stands off the surface enough to clear fingers, which matters on doors where users pull from the side. The 3/4 inch width and 1-1/16 inch base diameter set how much face area the pull covers at each mounting point, which helps when lining up multiple pulls to consistent reveals. The 8-32 x 1 inch screw size is specified to work with the pull threading, aligning with common cabinet hardware drilling and fastening patterns.
The Echo series pull with a 3-3/4 inch (96 mm) center to center measurement fits projects built around this standard hole spacing, from kitchen cabinets to shop storage. That center to center size is common in decorative hardware and moldings, so it works well in layouts that mix knobs and pulls within the same pattern. Zinc material supports use on both doors and drawers because it provides a consistent feel across many openings. Overall length of 5-9/16 inches means the pull suits medium-width drawer fronts, giving users enough bar to grasp without overwhelming narrower faces. The 1-1/4 inch projection keeps the hand away from the cabinet face, which is useful on doors with applied moldings where extra clearance helps prevent fingers from rubbing raised profiles during operation.
The defined 3-3/4 inch center to center distance on the Berenson Echo pull supports repeatable drilling, allowing installers to set jigs once and carry that setting through an entire run of cabinets. When the 5-9/16 inch overall length is paired with that spacing, each pull visually centers on the mounting holes, helping maintain even reveals between hardware and door edges. A 3/4 inch width controls the visual weight of the pull so installers can line up multiple pieces without crowding seams or stile edges. The 1-1/16 inch base diameter at each end gives a clear footprint to reference against layout lines, which helps during final tightening so bases stay parallel with door rails. Specified use of an 8-32 x 1 inch screw size ties into common cabinet construction practices, allowing the pull to integrate smoothly into standard drilling operations on most job sites.
The Berenson Echo pull uses a 3-3/4 inch (96 mm) center to center spacing, which sets exact hole locations and works with jigs designed around this common cabinet hardware dimension.
The 9258-1014-P Echo pull has a 5-9/16 inch overall length, giving extra bar beyond the mounting holes so users have more room to grip doors and drawers.
The Echo 96mm polished nickel pull projects 1-1/4 inches from the surface, creating finger clearance between the hand and the cabinet face during opening.
The Berenson Echo pull is made from zinc with a polished nickel finish, giving a solid metal feel with a reflective surface that coordinates with polished nickel hardware.
The Berenson Echo cabinet pull is specified for 8-32 x 1 inch screws, which match the pull threading for straightforward fastening into typical cabinet fronts.
This Echo series pull has a 3/4 inch width and a 1-1/16 inch base diameter, defining the front profile and the footprint at each mounting point on the cabinet face.
The Berenson Echo series 3-3/4 inch (96 mm) center to center polished nickel pull, model 9258-1014-P, provides defined dimensions that translate directly into layout and drilling decisions. Using the 5-9/16 inch length, 1-1/4 inch projection, and 3/4 inch width, installers can plan spacing, reveals, and clearances across an entire cabinet run. The zinc construction with polished nickel finish keeps the visual and tactile experience consistent wherever this pull is installed. For projects built around 96 mm spacing and polished nickel decorative hardware, this Echo pull offers a straightforward way to carry one look and feel across multiple doors and drawers.
Sold In: 1 Each
