
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
GSlide 12 inch soft close drawer slide describes a GSlide GS4270 12 side mount ball bearing drawer slide with 3/4 extension, so a 12 inch drawer gains controlled travel suitable for many cabinet depths where full extension is not required. The slide is part of the G-Slides Series, which means it matches other GSlide components in that family for consistent hardware selection across a job. Its soft close function works with a 38 mm long pneumatic cylinder, providing a dampening effect that slows the drawer at the end of travel, reducing slamming in everyday use. The slide is non-handed, so the same part works on either side of the drawer, simplifying stocking and layout during installation. A zinc finish on the slide offers a traditional cabinet hardware appearance that coordinates with common interior fittings in shops and residential projects.
This GS4270 12 slide is a side mount drawer slide, so it mounts along the drawer side and cabinet wall, which suits traditional framed and frameless cabinet construction that accepts side-mounted hardware. Recommended fasteners are #7 x 5/8 inch pan head screws, so the installer can match pilot holes and bit selection to that size for efficient driving and reliable hold in cabinet materials. The 1/2 inch side clearance specification gives a clear starting point for drawer width calculations relative to the cabinet opening, which supports accurate sizing before assembly. The slide height of 1-13/16 inch helps determine how far down from the drawer top or up from the drawer bottom the slide can be located while still clearing the cabinet opening and adjacent hardware.
The GS4270 12 side mount drawer slide fits projects calling for a 12 inch, 3/4 extension movement, so it suits shorter drawers where full-depth access is not essential. Its classification as a side mount drawer slide places it in the Side Mount, Ball Bearing Slides category, aligning with cabinet builds that already rely on ball bearing side mounts for smooth operation. The noted side clearance of 1/2 inch (1/2 inch plus 1/32 inch-0 inch) means this slide works in cabinet layouts designed around that specific gap, making it appropriate for new builds or replacements using that spacing. Because the slide is non-handed, it can be used on either side of the drawer without different part numbers, which is helpful on multi-drawer installations where repeating the same slide simplifies both planning and on-site work.
The 32 mm pattern on the GS4270 12 ties directly into 32 mm system drilling, so production shops and serious DIY users working with line-bored cabinets can place mounting screws using standard hole rows, supporting consistent drawer alignment from cabinet to cabinet. The stated side clearance tolerance of 1/2 inch (1/2 inch plus 1/32 inch-0 inch) provides a numeric range for drawer width, which helps reduce rework, because drawers sized to that range will engage the slide rails reliably. The recommended #7 x 5/8 inch pan head screws specification points to a screw size that fits the slide holes and common cabinet materials, encouraging secure fastening that holds alignment over time. The 3/4 extension characteristic defines how far the drawer front will project at full travel, which helps with planning clearances to adjacent doors, handles, or walls in tight layouts.
The GS4270 12 is a GSlide side mount, ball bearing drawer slide with 3/4 extension, so it supports smooth lateral mounting on traditional cabinet drawer boxes.
The GS4270 12 drawer slide uses 1/2 inch side clearance (1/2 inch plus 1/32 inch-0 inch), guiding drawer width sizing relative to the cabinet opening for proper fit.
The GS4270 12 has a soft close function using a 38 mm long pneumatic cylinder, which slows the drawer near closing and reduces impact at the cabinet front.
The GSlide GS4270 12 slide height is 1-13/16 inch, helping define drawer side height and mounting position so the slide clears the cabinet opening and other components.
The GS4270 12 slide specifies #7 x 5/8 inch pan head screws as recommended fasteners, which informs drill size and driving tools for secure installation.
The GS4270 12 is non-handed, so the same slide model can be used on either side of the drawer, simplifying ordering and layout.
The GS4270 12 drawer slide from GSlide combines 12 inch length, 3/4 extension, and soft close function, giving cabinets controlled movement in a familiar side mount format. With specified 1/2 inch side clearance, 1-13/16 inch height, and a 32 mm pattern, it fits projects built around system drilling and defined clearances. When a zinc-finished, non-handed side mount ball bearing slide aligns with your cabinet dimensions and layout, this model offers a clear, numeric path to planning and executing drawer installations.
Sold In: 1 Set
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each | GY4340RB Mfr# GS4340 RB | GS4270 Bracket for Drawer Slides, Rear-Mount |