Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
GSlides 26 inch soft close drawer slides provide a 26 inch full extension travel, allowing the drawer to pull completely out of the cabinet opening so contents are accessible from front to back. The GSlide Model 4270 design is a non-handed side mount slide, so each member works on either side of the drawer, simplifying layout when installing multiple drawers in a run. This side mount, ball bearing drawer slide has a soft close function that slows the drawer during the last part of travel, which reduces slam forces on the cabinet. A 38 mm long pneumatic cylinder provides the soft-close dampening effect, so the motion is controlled through gas-assisted resistance rather than relying on simple friction alone. Height on this slide is 1-13/16 inches, giving a low-profile side member that still supports the ball bearing mechanism in typical kitchen, bath, or shop drawer builds.
This GSlide Model 4270 side mount slide is built for a 1/2 inch side clearance, with an allowable range of 1/2 inch plus 1/32 inch to 0 inch, so the drawer box width can be sized precisely relative to the cabinet opening. The 32 mm pattern on the slide works with 32 mm system drilling, which supports line-bored cabinet sides and speeds up positioning during installation. A slide height of 1-13/16 inches gives a clear dimension for planning drawer side height so the slide sits fully against the drawer side material without protruding above it. Recommended #7 x 5/8 inch pan head screws match the slide steel thickness and hole style, so the head seats correctly in the mounting holes along the members.
The GSlide GS4270 26 drawer slide serves as a 26 inch full extension solution for side mount applications where complete drawer access is required. With a non-handed design, the same slide type mounts on either side of the drawer, which streamlines ordering and inventory when a shop runs several cabinet lines at this length. The defined 1/2 inch side clearance specification, with an allowance of 1/2 inch plus 1/32 inch to 0 inch, sets a clear target for drawer box width relative to the opening, supporting repeatable sizing across kitchen, bath, or office cabinet banks. The 32 mm pattern on the slide corresponds to 32 mm system drilling in cabinet sides, tying directly into line-boring patterns used in frameless construction. Height of 1-13/16 inches supports layouts where drawer sides are designed to conceal the hardware profile while still clearing the slide over its full travel.
The full extension ball bearing design on this GSlide Model 4270 allows the drawer to travel its complete 26 inch length, so guides and ball races stay engaged throughout the stroke for stable movement. The soft close function with its 38 mm long pneumatic cylinder controls closing speed at the end of travel, which lessens closing shock on joinery and reduces the tendency for drawers to bounce off the cabinet face. Zinc finish on the steel members provides a protective plated surface, which suits interior environments where a metal slide needs to resist normal cabinet humidity. The 32 mm pattern layout and defined 1/2 inch side clearance help fabricators align drilling, box sizing, and slide location so installations remain consistent from cabinet to cabinet. Recommended #7 x 5/8 inch pan head screws correspond to the slide hole design, supporting a flush head fit that does not interfere with the ball bearing members during operation.
GSlide GS4270 26 is a side mount, full extension, soft close ball bearing drawer slide, so it mounts to the cabinet sides and lets the drawer open to its full 26 inch length.
GSlide Model 4270 uses a 1/2 inch side clearance, with an allowed range of 1/2 inch plus 1/32 inch to 0 inch, so drawer width can be sized precisely to the cabinet opening.
GSlide Model 4270 is non-handed, so the same slide can be used on either the left or right side of the drawer, simplifying stocking and layout.
This slide uses a soft close function with a 38 mm long pneumatic cylinder, so the cylinder provides a dampening effect during the final closing segment.
The GSlide GS4270 26 slide height is 1-13/16 inches, allowing drawer side designs that cover the hardware while still clearing the full ball bearing travel.
GSlide Model 4270 has a 32 mm pattern, aligning with 32 mm system drilling on cabinet sides for straightforward positioning in frameless cabinet construction.
The GSlides 26 inch soft close drawer slides from GSlide combine full extension travel, a defined 1/2 inch side clearance, and a 1-13/16 inch height, giving clear dimensions for cabinet and drawer layout. The non-handed side mount design and 32 mm pattern align with production drilling methods, supporting consistent runs across multiple cabinets. With a soft close function driven by a 38 mm pneumatic cylinder and a zinc finish over the slide members, this GSlide Model 4270 setup matches typical interior cabinet environments. Select the GS4270 26 when a 26 inch full extension, soft close, side mount ball bearing slide is required for your next set of drawers.
Sold In: 1 Set
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  GY4340RB Mfr# GS4340 RB | GS4270 Bracket for Drawer Slides, Rear-Mount |
