Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This is a 22 inch full-extension side-mount ball bearing drawer slide from GSlide's G-Slide series, rated 100 lb per pair, with an integrated soft-close damper that settles the drawer shut without a slam.
A 22 inch slide suits deeper cabinet runs: standard kitchen base cabinets, pantry pull-outs, bathroom vanity drawers, and utility cabinet builds where a shorter slide leaves wasted depth. At full extension, the entire drawer box clears the opening, so reaching the back corner of a pot drawer or the bottom of a linen pull-out is a one-handed motion, not a search. The soft-close feature earns its keep in busy kitchens and shared spaces where slamming drawers are a daily irritation — the damper catches the drawer consistently, even when it is pushed hard.
The slide members are cold-formed steel with a zinc electroplate finish. Zinc is the working standard for side-mount ball bearing slides: it handles indoor humidity and daily contact without corroding or staining the cabinet interior. This is not a decorative finish — the slides sit beside the drawer box and are mostly out of sight in use. The ball bearings run in formed steel raceways the full length of the slide, keeping travel smooth and load distributed evenly across the bearing set rather than at a single point.
The G-Slide series works in both frameless and face-frame cabinet construction. In a frameless cabinet, the slide mounts directly to the side panel using the standard hole pattern. In a face-frame cabinet, the back end of the slide needs support — add the appropriate rear mounting brackets, sold separately, to carry the slide at the correct height without relying on the face frame alone. Either way, build the drawer box 1 inch narrower than the cabinet opening to leave 1/2 inch of side clearance per slide. The non-handed design simplifies installation: pull two identical slides from the bag and mount them without sorting left from right.
No. Self-close uses a spring or ramp to pull the drawer shut on its own. Soft-close uses a damper to slow the drawer over the last portion of its travel — the drawer settles in quietly rather than snapping shut. This slide is soft-close only; it will not pull itself closed from mid-travel.
No. Twenty-two inches is the closed length of the slide. Because this slide is full extension, the drawer travels approximately that full length to clear the cabinet opening — but slide length and drawer travel are two separate specs, and you should confirm that the slide length fits your cabinet's interior depth before ordering.
Build the box 1 inch narrower than the finished opening width. Each slide needs 1/2 inch of clearance between the drawer side and the cabinet wall, and 1 inch total accounts for both sides.
No. The G-Slide design is non-handed — both slides in the pair are identical and fit either side of the drawer.
Yes. In a face-frame cabinet the slide's rear end needs support from a bracket rather than the cabinet side. Rear mounting brackets for this series are sold separately.
For a kitchen renovation, a shop cabinet rebuild, or a bathroom vanity build where the details matter, the 22 inch G-Slide soft-close pair delivers full access and a controlled close on a non-handed, straightforward install — one pair per drawer, and the cabinet works the way it should.
Sold In: 1 Set
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  GY4340RB Mfr# GS4340 RB | GSlide Rear Mounting Bracket, GS4340 RB |
