
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
GSlides 20 inch soft close drawer slides are 20 inch full extension ball bearing side mount slides, so drawers travel the full length for clear access to stored items. The GSlide Model #4270 design is non-handed, so the same slide works on either side of the drawer and simplifies stocking one part for both left and right positions. This side mount drawer slide belongs to the G-Slides Series, so it aligns with common shop setups that already follow this series. The slide has a soft close function, so drawers are pulled gently closed at the end of travel, which reduces slamming in everyday use. A 38 mm long pneumatic cylinder provides a soft-close dampening effect, so the closing action is controlled over the last portion of movement and helps protect the drawer and cabinet from repeated impact.
This GSlides 20 inch soft close drawer slide is a side mount drawer slide, so it attaches to the cabinet side and the drawer side for straightforward alignment in typical face frame or frameless layouts. The recommended fasteners are #7 x 5/8 inch pan head screws, so hole sizing and driver choice can be planned around that screw size during installation. The 32 mm pattern in the slide gives a reference for positioning holes along system rows, tying into standard line-boring setups in production shops. With a defined side clearance of 1/2 inch (1/2 inch plus 1/32 inch-0 inch), carcass and drawer sizing can be set on the bench before fitting, helping reduce adjustment time at assembly.
The GSlide GS4270 20 drawer slide is a 20 inch full extension soft close ball bearing side mount slide, so it matches drawer depths built around that 20 inch slide length. The non-handed construction means one stock item serves both left and right drawers, which streamlines part selection in cabinet shops and on jobsites. The 1-13/16 inch slide height works with a wide range of drawer box side heights, so it suits many kitchen, bath, office, and shop storage layouts that use side mount slides. The 32 mm pattern aligns with system-bored cabinets, so this slide fits smoothly into production lines or custom shops that follow the 32 mm system for shelf pins and hardware rows.
The soft close function with a 38 mm long pneumatic cylinder provides a controlled dampening effect at the end of travel, so drawers close quietly and avoid hard impact against the cabinet front over repeated use. The ball bearing construction supports smooth full extension motion, so drawers pull out fully for visibility and access while still feeling stable along the runners. A side clearance of 1/2 inch (1/2 inch plus 1/32 inch-0 inch) gives a specific width target, so cabinetmakers can repeat the same drawer formulas from job to job without recalculating each opening. The zinc finish offers a familiar metal look, so hardware in the cabinet presents a consistent appearance when drawers are open. Sold in full box quantities, this G-Slides Series model supports stocking for runs of cabinets where the same 20 inch side mount slide is used across multiple openings.
The GSlide GS4270 20 is a 20 inch full extension soft close ball bearing side mount drawer slide, so it supports full drawer access with controlled closing.
The GSlides 20 inch soft close drawer slides use 1/2 inch side clearance (1/2 inch plus 1/32 inch-0 inch), so cabinet and drawer widths can be laid out to that fixed value.
The GSlide Model #4270 is non-handed, so the same slide part fits both left and right sides of the drawer for simpler stocking and layout.
The GSlide GS4270 20 drawer slide uses a 32 mm pattern, so it aligns with cabinets built on the 32 mm system and standard line-bored hole rows.
The GSlides 20 inch soft close drawer slides have a zinc finish, so they coordinate with other zinc-coated hardware and present a clean metal look inside drawers.
The GSlide GS4270 20 drawer slide uses recommended #7 x 5/8 inch pan head screws, so drilling and driver selection can be matched to that screw size.
The GSlides 20 inch soft close drawer slides combine full extension, side mount installation, and a defined 1/2 inch side clearance, so they suit cabinet projects built around 20 inch drawers and repeatable width formulas. With a soft close function driven by a 38 mm pneumatic cylinder and a ball bearing design, these slides support smooth motion and controlled closing in everyday use. Choosing the GSlide GS4270 20 drawer slide with its 32 mm pattern and zinc finish ties directly into system-bored cabinets and common shop hardware, so runs of drawers can be laid out, installed, and operated consistently.
Sold In: 1 Set
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each | GY4340RB Mfr# GS4340 RB | GS4270 Bracket for Drawer Slides, Rear-Mount |