GSlides 28 Inch Full Extension Drawer Slides Use

GSlides 28 inch full extension drawer slides are side mount ball bearing slides that let the drawer travel its full length, so installers can access the entire drawer space on the job. The soft close function on this GSlide GS4270 28 drawer slide controls the final part of travel, which helps drawers close in a controlled way in day-to-day use. The non-handed design means the same slide model handles both left and right sides, which simplifies layout and part selection for repetitive installations. A 1/2 inch side clearance, stated as 1/2 inch plus 1/32 inch to 0, sets a clear target for cabinet and drawer widths, which supports consistent fit across multiple units. The 1-13/16 inch height establishes the vertical space this side mount slide occupies, which matters when working around drawer bottoms, stretchers, and adjacent hardware.

Key GSlides GS4270 28 Details For Installers

• The side clearance of 1/2 inch plus 1/32 inch to 0 defines the gap between drawer and cabinet, so case and drawer box widths can be sized for smooth running without side rub.
• The 1-13/16 inch slide height sets a fixed profile at the drawer side, which helps when locating drawer bottoms, determining notch depths, and planning stack clearances in a cabinet.
• The full extension travel means the drawer moves completely out of the cabinet, so stored items are visible and accessible without overreaching into the case.
• The soft close function, driven by a 38 mm long pneumatic cylinder, slows and pulls the drawer into the closed position, which reduces slam impact on the slide assembly over time.
• The zinc finish gives the slide a uniform metal surface, which supports a consistent appearance inside cabinets and aligns with other common zinc-finished hardware.
• The 32 mm pattern on this model aligns with 32 mm system drilling, which speeds layout and mounting in casework designed around that hole spacing.

Side Mount Drawer Slide Fit And Installation Focus

This GSlide model 4270 uses a side mount configuration, so it registers directly against the drawer side and cabinet side, which simplifies locating the runners in basic casework. The specified side clearance of 1/2 inch plus 1/32 inch to 0 provides a clear dimensional window, so drawer widths can be cut to maintain sliding action without binding. The 1-13/16 inch height defines how far the slide projects up the drawer side, which helps installers balance drawer side height, bottom position, and available interior depth. The 32 mm pattern support allows the slide to tie into system holes, which is useful when working with case sides pre-drilled on 32 mm centers.

Using GSlides GS4270 28 In Cabinet Projects

Where This Side Mount Slide Works Best

The GSlide GS4270 28 drawer slide is a side mount ball bearing slide in the G-Slides series, which suits cabinet projects built around standard side mount hardware. Its 28 inch length pairs with drawer boxes that need full extension to expose the interior, which is useful in deeper base cabinets or storage pull-outs. The soft close function, provided by the 38 mm long pneumatic cylinder, activates near the end of stroke to draw the drawer into the cabinet, which is valuable in residential or light commercial cabinetry where controlled closing is important. The zinc finish fits environments where a bright metal slide is appropriate inside cases, matching other zinc-finished components from typical woodworking projects. With a 1-13/16 inch height, this slide fits alongside drawer constructions that use moderate side heights, which supports stacking multiple drawers vertically in a cabinet run.

Details That Support Consistent Drawer Performance

The specified side clearance of 1/2 inch plus 1/32 inch to 0 on this GSlides ball bearing drawer slide defines the working gap that supports reliable slide motion, which helps maintain consistent feel from drawer to drawer when dimensions follow that range. The full extension action means the ball bearing mechanism carries the drawer fully forward, which allows installers to align drawer fronts flush with cabinet faces while still delivering complete access. The non-handed description means the same GS4270 28 slide model can be used on both sides, which reduces part variation and simplifies stocking in the shop. The 32 mm pattern is noted as present, so in systems using 32 mm line boring, this slide can tie into that existing hole layout to streamline production drilling. Recommended fasteners are #7 x 5/8 inch pan head screws, which indicate both diameter and length targets that match the slide holes and typical cabinet side thicknesses.

Common Questions About GSlides 28 Inch Drawer Slides

Selecting GSlides GS4270 28 For Your Project

The GSlides 28 inch full extension drawer slides pair a side mount layout with full extension travel, giving cabinets accessible storage along the slide length. With a defined 1/2 inch plus 1/32 inch to 0 side clearance and a 1-13/16 inch height, this GS4270 28 model supports predictable drawer box sizing and layout. The soft close function using a 38 mm pneumatic cylinder, the 32 mm pattern, and the zinc finish bring practical, stated features together in one slide choice for casework built around side mount ball bearing runners.