Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Berenson Edge Series 160mm pull is a zinc die cast cabinet handle in a brushed nickel finish, so it provides a consistent modern look on cabinet fronts while using a sturdy metal base. The pull has a 6-5/16 inch (160 mm) center to center dimension, which aligns handle mounting holes across doors and drawers for a uniform layout on new or existing cabinetry. Overall length is 7-3/8 inches, giving enough bar length for a full hand grip on wider drawer fronts. The 1-3/8 inch projection spaces the hand away from the cabinet face, which helps users grab the pull comfortably without knuckles scraping finished surfaces. A narrow 5/16 inch width creates a slim profile, so the pull reads as a clean linear detail rather than a bulky handle on the cabinet design.
The 6-5/16 inch (160 mm) center to center measurement defines the distance between mounting holes, so installers can lay out drilling patterns or reuse existing 160 mm bores without reworking cabinet faces. A total length of 7-3/8 inches means the handle extends slightly past the mounting points, which gives a balanced look on standard cabinet doors and mid-size drawers. With a 1-3/8 inch projection, the pull stands off the surface enough to clear typical door and drawer edge profiles, which helps prevent hands from bumping against decorative edges during use. The slim 5/16 inch width concentrates the load along a narrow bar, which maintains a subtle visual line when multiple pulls are installed in a row.
This Edge Series brushed nickel pull falls within the handles and pulls category, so it is intended for use on cabinet doors and drawers where a bar-style grip is desired. The 160 mm center to center dimension positions it in the common metric spread range, which suits installations on frameless cabinets or any layout built around 160 mm hole spacing. Its 7-3/8 inch overall length works well on medium and larger fronts, where a longer handle helps distribute pulling force along the drawer or door edge. The brushed nickel finish aligns with other brushed nickel decorative hardware and moldings, which supports coordinated hardware selections in kitchens, bathrooms, and storage installations. With a 5/16 inch width, the pull fits visually on narrow rails or stile faces, which helps keep proportions controlled on slimmer cabinet members.
The specified 6-5/16 inch (160 mm) center to center spacing gives a fixed drilling reference, which simplifies repeating hole locations across a bank of cabinets and reduces layout variation from piece to piece. Its zinc die cast construction provides a consistent form, so multiple pulls of this model present the same shape and dimensions when lined up along a run of doors or drawers. The 1-3/8 inch projection is defined, which helps installers anticipate clearance behind the pull relative to neighboring doors, walls, or trim when planning tight reveals. The 7-3/8 inch total length gives a predictable handle footprint, which aids in centering the pull on fronts and aligning it with other hardware types in the same field of view. The brushed nickel finish is identified, which supports selecting matching hinges, pulls, and other decorative hardware finishes for unified visual results. The 5/16 inch width stays constant along the bar, which contributes to straight, even sight lines when several pulls are mounted in parallel rows.
The Berenson 9269-1BPN-C pull has 6-5/16 inch (160 mm) center to center spacing, a 7-3/8 inch overall length, 1-3/8 inch projection, and 5/16 inch width, which defines its footprint on cabinet fronts.
The 160 mm center to center size sets the hole spacing, which lets installers match existing 160 mm layouts or drill new holes on that spread for consistent alignment.
This Edge Series cabinet pull is made from zinc die cast material, which provides a solid metal body for regular door and drawer operation.
This Berenson Edge Series pull has a brushed nickel finish, which pairs with other brushed nickel hardware and fixtures in the same space.
This 7-3/8 inch cabinet handle is used on cabinet doors and drawers, where its length and 160 mm spread suit medium and larger fronts.
The 1-3/8 inch projection holds the pull away from the cabinet surface, which gives fingers space behind the bar for a more comfortable grip.
This Berenson Edge Series 6-5/16 inch (160 mm) center to center brushed nickel pull pairs a defined metric spread with a 7-3/8 inch length, so it suits runs of doors and drawers laid out on 160 mm centers. Its zinc die cast construction and brushed nickel finish align with decorative hardware and moldings in the same palette, which supports cohesive cabinet hardware planning. For projects requiring a slim, 5/16 inch wide pull with 1-3/8 inch projection, this handle offers fixed dimensions that streamline layout and drilling across multiple cabinet fronts.
Sold In: 1 Each
