Berenson Dual Series 16mm Knob For Cabinets

Berenson Dual Series 16mm knob identifies this part as a compact pull from the Dual Series line, so it suits projects that repeat this collection across a room. The brushed nickel finish provides a muted metallic look, which works well in decorative hardware installations where a neutral metal tone is preferred. Zinc die cast construction forms the body, giving the knob a solid feel for repeated cabinet use. The center to center dimension of 5/8 inch, or 16 mm, defines the mounting reference, giving installers a clear drilling layout for consistent alignment. A length of 1 inch keeps the pull visually small, which helps on tight drawer fronts or narrow face frames. The 1 inch projection provides fingertip clearance off the door surface, supporting a comfortable grip when opening. A width of 3/8 inch keeps the profile slim, helping this knob sit neatly on smaller cabinet members.

Key Dual Series Knob Details For Projects

• The knob is part of the Dual Series collection, which helps match other Dual Series decorative hardware on the same job for a consistent look.
• The brushed nickel finish defines a soft metallic appearance, so it coordinates easily with many hinges and other brushed nickel decorative hardware.
• Zinc die cast material forms the knob body, giving a solid metal component for everyday cabinet door and drawer operation.
• The center to center measurement of 5/8 inch, or 16 mm, sets the hole spacing, guiding drilling jigs and layout marks during installation.
• A 1 inch length and 3/8 inch width create a compact footprint, which fits well on smaller cabinet doors, narrow rails, or light drawer fronts.
• The 1 inch projection establishes the stand-off from the cabinet surface, giving finger clearance while keeping the pull close to the face.

Mounting Dimensions And Fit For This Knob

The 5/8 inch center to center dimension sets the critical mounting line, so drilling through a door or drawer front can be laid out accurately from an edge or centerline. With a length of 1 inch, the knob occupies limited space on the face, which is useful where stile widths are tight. The 3/8 inch width keeps the contact area narrow, helping it sit neatly on narrow face frames. A 1 inch projection defines how far the grip stands off the surface, providing usable clearance for fingers while keeping the hardware close enough for compact cabinetry. These measurements taken together support repeatable placement across multiple fronts, which is important when aligning rows of knobs on banks of doors or drawers.

How This Brushed Nickel Knob Works In Use

Where This Zinc Die Cast Knob Fits Best

This knob belongs to the Berenson Dual Series, placing it within a decorative hardware family used on cabinets and similar casework. The 5/8 inch, or 16 mm, center to center spacing positions it well on small cabinet doors or narrow drawers where larger pulls would crowd the face. Its 1 inch length keeps the visible hardware compact, which suits finer rail and stile constructions that benefit from smaller scale components. The 3/8 inch width presents a slim front edge, allowing the knob to sit comfortably even on narrow frames without overhanging edges. A 1 inch projection gives practical clearance for gripping while staying close to the cabinet, which is useful on doors that swing near walls or adjacent cabinets. The brushed nickel finish lets it work alongside other brushed nickel decorative hardware, helping maintain consistent finishes across a kitchen or built-in installation.

Details That Support Consistent Cabinet Results

The 16 mm center to center mounting dimension offers a precise reference for boring patterns, supporting the use of drilling jigs or templates for consistent alignment. Zinc die cast construction produces a stable metal body, which aids in holding threads firmly during repeated use on doors and drawers. The 1 inch projection determines how far the user pulls away from the cabinet face, helping operators anticipate handle clearance when planning door overlays or drawer stack spacing. A 1 inch length concentrates the pull in a small area, which can simplify layout when several knobs sit near each other on narrow drawer fronts. The 3/8 inch width defines the bearing surface on the cabinet, helping distribute contact without overwhelming delicate trim. As part of the Dual Series, this knob can be chosen alongside other Dual Series pieces, which simplifies planning when a project uses multiple hardware types that share a common style.

Common Questions About This Berenson Dual Knob

Select This Knob For Coordinated Cabinet Hardware

This Berenson Dual Series 16mm knob combines a 5/8 inch center to center layout, compact 1 inch by 3/8 inch face dimensions, and a 1 inch projection, supporting clean alignment on cabinets. With brushed nickel finish and zinc die cast construction, it matches other brushed nickel decorative hardware while providing a solid metal pull. For projects built around the Dual Series style, this knob offers a defined size and look that can be repeated across doors and drawers for consistent results.