Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Berenson Dual Series 16mm pull describes a small-format cabinet knob style pull built for tight layouts where standard handles do not fit. The 5/8 inch (16 mm) center to center dimension creates a compact mounting pattern, which helps on narrow frames or condensed drawer fronts. The dull chrome finish presents a muted, non-mirrored surface, which cuts down on visual glare in work areas. The knob-style form with a 1 inch length or diameter provides a simple hand grip, which suits small doors or drawers that do not need a full bar handle. A 1 inch projection sets the pull away from the front, which leaves finger clearance while still keeping the hardware close to the face of the cabinet. The zinc die cast material gives a solid metal body, which supports a secure feel at the hand contact point.
The 5/8 inch (16 mm) center to center measurement defines the drilling layout, which guides hole placement when setting up new doors or replacing existing hardware with this exact size. The 1 inch projection dimension describes how far the pull extends outward, which influences clearance near adjacent doors, walls, or trim. A width of 3/8 inch establishes a slim front profile, which matters when hardware must stay inside tight reveal lines or next to other components. The 1 inch length or diameter measures the main body size, which affects how the knob sits visually on narrow stiles. The dull chrome finish specification sets the surface appearance, which helps align this pull with other fittings that share a similar color tone in the same space.
The 5/8 inch (16 mm) center to center layout lets this pull work on doors or drawers that provide only a short span between rails, which is common on compact cabinets or small utility pieces. The 3/8 inch width keeps the hardware slim across the face, which helps when stile or drawer front width is limited but still needs a defined handhold. The 1 inch length or diameter makes sense on narrow fronts, because it keeps the knob proportionate instead of overhanging edges. The dull chrome finish coordinates with installations that use similar muted metal tones, which helps hardware visually tie together across base cabinets, uppers, or storage units in the same room.
The precise 5/8 inch (16 mm) center to center distance allows consistent drilling from part to part, which supports straight runs of pulls across multiple fronts without layout variation. The zinc die cast material yields a formed metal body, which contributes to uniform sizing and shape as pieces are installed down a bank of drawers. A 1 inch projection sets a repeatable standoff from the surface, which aids in aligning fronts so each grip depth feels similar at the hand. The 3/8 inch width and 1 inch body dimension keep the visual footprint predictable, which simplifies spacing decisions when placing multiple knobs on wider drawers. The dull chrome finish brings a consistent surface appearance, which maintains a unified look when several units are mounted side by side.
The Berenson 9314-10DC-C is a Dual Series cabinet pull with a 5/8 inch (16 mm) center to center layout, so it functions as a compact knob-style pull for doors or drawers.
The pull has a 5/8 inch center to center, 1 inch length or diameter, 1 inch projection, and 3/8 inch width, which defines its drilling pattern, grip depth, and face coverage.
The 5/8 inch center to center dimension sets a tight hole spacing, which suits narrow rails and supports consistent drilling when repeating the pull across multiple fronts.
The dull chrome finish provides a subdued metallic look, which helps hardware blend into cabinetry where a low-sheen appearance is preferred over a bright mirror effect.
The 1 inch projection sets the pull 1 inch off the cabinet face, which offers finger clearance behind the knob while keeping the hardware profile relatively compact.
This Berenson Dual Series pull is made from zinc die cast, which provides a solid metal construction and supports consistent sizing for aligned installations.
This Berenson Dual Series 16mm pull combines a 5/8 inch center to center layout, 1 inch projection, and 3/8 inch width, so it suits cabinets where space and alignment matter. The zinc die cast construction and dull chrome finish provide a defined style and consistent dimensions. For projects that call for a compact, low-sheen metal pull with a known drilling pattern, this model matches those requirements for narrow doors and drawers.
Sold In: 1 Each
