Berenson Dual Series 6-5/16" (160 mm) Center to Center Brushed Nickel Pull, - 9305-1BPN-C

Berenson Dual Series Brushed Nickel Pull Uses

Berenson Dual Series brushed nickel pull is a zinc die cast handle designed for cabinet and furniture doors or drawers where a 6-5/16 inch center to center layout is required, so hole spacing stays consistent across the run. The 160 mm center to center dimension matches the stated 6-5/16 inch size, which supports metric or imperial layout on shop drawings and in the field. Its overall length of 6-5/8 inch gives a little overhang beyond the mounting holes, which helps cover minor drilling variation on the face. The 1 inch projection creates clearance for fingers in front of the door or drawer face, which is useful on thicker fronts. A 3/8 inch width presents a slim profile on the surface, which keeps the look clean without crowding narrow rails. The brushed nickel finish provides a muted metallic appearance, which pairs with many common hinge and faucet finishes on projects.

Key Handle Details That Support Cabinet Work

• The zinc die cast material forms a rigid pull body, which helps the handle feel solid when operating doors or drawers multiple times a day.
• The brushed nickel finish softens reflected light, which helps the pull sit visually quiet on face frames, slab fronts, or overlay doors in finished spaces.
• The 6-5/16 inch center to center dimension matches 160 mm spacing, which simplifies layout for both metric-based and imperial-based shop setups.
• The 6-5/8 inch overall length leaves slight coverage past the mounting holes, which can help hide small tear-out or bit wander around the drilled bores.
• The 1 inch projection maintains stand-off from the cabinet face, which gives adequate finger clearance without protruding excessively into walkways.
• The 3/8 inch width keeps the grip area slim, which suits narrower rails or drawer fronts where larger pulls might crowd the design.
• The stated screw size of 45 mm relates directly to door or drawer thickness, which matters when threading the pull securely into the front material.

Mounting Layout, Hole Spacing, And Fit Details

The 6-5/16 inch center to center measurement defines the drilling pattern for this Berenson Dual Series brushed nickel pull, which drives how jigs or templates are set up on doors and drawers. With 160 mm matching that same spacing, the pull suits layouts documented in either millimeters or inches, which can streamline work in mixed-standard shops. The 6-5/8 inch overall length means the handle ends extend slightly past the mounting centers, which can assist in visually balancing the pull on wider drawer fronts. Its 1 inch projection sets the handle off the face enough for a comfortable grasp, which matters when opening heavier drawers. The 3/8 inch width keeps the pull narrow on the surface, which can be important when aligning multiple pulls across banked drawers or tight stile widths.

How This 9305-1BPN-C Pull Works In Practice

Cabinet And Drawer Applications For This Pull

This Berenson Corporation 9305-1BPN-C pull is part of the Dual Series, which positions it for consistent use across a project where a coordinated style is needed on doors and drawers. The 6-5/16 inch center to center dimension places it in a longer-handle category, which suits wider cabinet doors or mid-to-large drawers where extra hand room is desirable. Its 6-5/8 inch overall length provides visual weight on bigger faces, which can help the hardware read correctly against larger panel areas. The 1 inch projection offers space between the pull and the door or drawer face, which is useful on thicker cabinetry fronts or when hands are gloved. With a 3/8 inch width, the pull stays visually light, which works well on narrow rails, inset faces, or modern slab designs where bulkier handles might dominate. The zinc die cast construction supports these uses by forming a consistent shape along the length, which helps each pull line up cleanly in multi-handle runs.

Details That Support Consistent Layout And Operation

The combination of 160 mm and 6-5/16 inch center to center means this Dual Series brushed nickel pull aligns with common drilling jigs, which supports repeatable hole placement from cabinet to cabinet. The slight difference between the 6-5/8 inch overall length and the mounting centers allows the pull ends to cover the drilling area, which can visually clean up small bit entry marks. The 1 inch projection defines how far the hand sits off the cabinet face in use, which can help when planning clearances to adjacent walls or appliance panels. A 3/8 inch width concentrates the grip into a narrower band, which matters when positioning the pull near door edges or stacked drawer fronts where spacing is tight. The brushed nickel finish adds a consistent surface sheen across all units, which contributes to an even appearance when many handles are lined up along a run of cabinets. The specified 45 mm screw size defines the length of the fastener engagement through the front, which relates directly to how the pull seats against the face when tightened.

Common Questions About This Brushed Nickel Pull

Selecting This Pull For Your Next Cabinet Run

This Berenson Dual Series brushed nickel pull with 6-5/16 inch (160 mm) center to center spacing, 6-5/8 inch overall length, and 1 inch projection gives a defined layout pattern for new or remodeled cabinets. The zinc die cast construction and 3/8 inch width create a slim, consistent profile that suits many door and drawer sizes. The brushed nickel finish coordinates with common decorative hardware in kitchens, baths, and built-ins. When a project calls for this specific 9305-1BPN-C configuration, Wurth Baer Supply provides it within a broader range of cabinet hardware for woodworking professionals.