Berenson Dual Series Pull For Cabinet Projects

Berenson Dual Series pull gives you a 5-1/16 inch (128 mm) center to center handle that lines up with common drill patterns, helping straightforward replacement or new layouts on cabinets and furniture. The pull is part of the Berenson Corporation Dual Series, so it matches that collection when you want a consistent look across a room. Its brushed nickel finish provides a muted metal appearance that fits decorative hardware projects in kitchens, baths, or built-ins. The pull is made from zinc die cast, which creates a solid-feeling handle for routine cabinet door and drawer use. Overall length is 5-3/8 inches, giving you some edge-to-edge coverage on typical cabinet faces. A 1 inch projection stands the pull off the surface, creating finger clearance for opening doors and drawers. The 3/8 inch width presents a slim profile that keeps the hardware visually light on the face of the cabinet.

Key Pull Details That Support Cabinet Work

• The 128 mm center to center dimension aligns the Berenson Dual Series pull with many drilling templates, which simplifies layout when setting rows of handles on doors or drawers.
• The 5-3/8 inch overall length covers more of the cabinet rail or drawer front, which can help visually balance wider doors or drawer fronts in a run of cabinets.
• The 1 inch projection positions the handle away from the cabinet surface, which creates working space for fingers when grabbing the pull on doors or drawer fronts.
• The 3/8 inch width keeps the pull slim, which helps when you want hardware that is present but does not dominate the cabinet face lines.
• The brushed nickel finish delivers a soft metallic tone, which supports use in decorative hardware applications where a neutral metal look is preferred.
• The zinc die cast material gives the pull a solid metal construction, which supports everyday cabinet opening and closing in residential woodworking environments.

Installation Dimensions For Cabinet And Drawer Fit

The 5-1/16 inch center to center dimension on this pull sets the mounting hole spacing, guiding drilling for new installations or swaps on existing cabinet doors and drawers. A 5-3/8 inch overall length defines how much linear space the pull occupies, helping layout near panel edges or neighboring hardware. With a 1 inch projection, the handle stands off the surface enough to allow fingers to wrap behind it during operation. The 3/8 inch width describes the front-to-back thickness across the face of the pull, which keeps the grip narrow for a clean look along rails and stiles. These fixed measurements help align multiple Berenson Dual Series pulls across cabinet banks for a consistent installation line.

Using This Brushed Nickel Pull In Cabinet Work

Where The 9308-1BPN-C Pull Works Best

This Berenson Dual Series 9308-1BPN-C pull fits cabinet and drawer applications that are drilled at 128 mm center to center, keeping hardware consistent in kitchens, baths, or shop-built furniture. The brushed nickel finish supports projects that call for a neutral metal tone on decorative hardware and moldings. With a 5-3/8 inch overall length, the pull suits doors and drawers that need a mid-length handle rather than a short knob or very long bar. The 1 inch projection places the gripping area away from the door or drawer front, helping hands find a reliable hold in daily use. A 3/8 inch width keeps the pull proportional on narrower rails while still reading as a distinct handle on wider faces.

Why These Dimensions Support Repeatable Results

The 5-1/16 inch (128 mm) center to center measurement allows installers and woodworkers to match drilling from job to job using the same standard spacing, which streamlines layout when running multiple cabinets. The zinc die cast material gives the pull a consistent form, so each piece in the Dual Series aligns visually when mounted in rows. Brushed nickel finish across the collection provides a unified appearance, supporting repeatable design results across doors and drawers. The 1 inch projection and 3/8 inch width work together to shape the handfeel of the pull, giving a predictable clearance and grip across every installation. Because the overall length, projection, width, and center to center are fixed, installers can plan rail sizes, stile placement, and hardware positions with confidence when specifying this Berenson Dual Series pull.

Common Questions About This Berenson Dual Series Pull

Select This Pull For 128 mm Cabinet Layouts

The Berenson Dual Series pull, model 9308-1BPN-C, combines a 5-1/16 inch (128 mm) center to center layout with a 5-3/8 inch overall length for cabinet and drawer projects. Its brushed nickel finish and zinc die cast construction support decorative hardware work where a consistent, neutral metal pull is needed across multiple fronts.