Berenson Dual Series 7-9/16" (192 mm) Center to Center Dull Chrome Pull, - 9304-10DC-C

Berenson Dual Series 192mm Pull For Cabinets

Berenson Dual Series 192mm pull is a zinc die cast cabinet handle in a dull chrome finish that gives cabinets a clean, contemporary look while tying in with other chrome hardware on the job. The 7-9/16 inch center to center dimension sets a precise drilling layout that keeps multiple doors and drawers aligned visually across a run. Overall length of 7-7/8 inch adds a bit of overhang at each screw hole, which helps cover minor layout variations on existing fronts. A projection of 1 inch creates grip clearance while keeping the handle tight to the face, useful on tight walkways or closely spaced cabinet rows. The 3/8 inch width provides a slim profile that suits modern installations while still giving enough edge for a solid pull when opening heavier drawers or wider doors.

Key Dual Series Pull Details For Daily Use

• The zinc die cast material gives the pull a solid feel in the hand, which helps doors and drawers open smoothly and consistently over repeated use in busy cabinet areas.
• The dull chrome finish keeps reflections down while coordinating with other chrome hardware, which supports a unified appearance across kitchen, bath, or casework projects.
• The 7-9/16 inch center to center layout matches common cabinet boring patterns, which simplifies planning when laying out multiple fronts on new or retrofit work.
• The 7-7/8 inch overall length slightly exceeds the boring span, which helps visually bridge between fastener points and can hide small layout differences on existing cabinetry.
• The 1 inch projection keeps the pull low profile to the face, which helps prevent catches on passing clothing while still providing enough space to get fingers behind the handle.
• The 3/8 inch width gives a narrow, modern look, which works well where a slim handle is preferred over bulkier cabinet hardware.

Mounting And Fit Details For This Pull

The 7-9/16 inch center to center measurement defines the screw spacing for this pull, so drilled holes align directly with the handle feet for a straight, secure mount on cabinet doors or drawer fronts. With an overall length of 7-7/8 inch, the pull extends slightly beyond the mounting points, so the handle visually frames the hole pattern and can overlap minor edge wear near the boring. A projection of 1 inch keeps the grip area close to the door or drawer surface, which is helpful where doors open toward walls or appliances and clearance is limited. The 3/8 inch width keeps the pull narrow on the face, which can be advantageous when spacing multiple pulls closely on smaller drawer stacks or narrow doors.

Using This Dull Chrome Pull In Projects

Where This Berenson Dual Series Pull Fits Best

This Berenson Dual Series cabinet pull sits in the decorative hardware and moldings category under handles and pulls, so it works well anywhere a visible handle is needed on cabinet doors or drawer fronts. The dull chrome finish lets it blend with other chrome elements without high glare, which suits residential kitchens, baths, or built-in casework. The 7-9/16 inch center to center size places it in a longer pull range, which can complement wider drawers or taller doors by giving more hand contact across the front. Because the pull is zinc die cast, it provides a metal feel and weight that match typical cabinet hardware setups in woodworking projects supplied by Wurth Baer Supply.

Why These Dimensions Support Consistent Results

The 192 mm (7-9/16 inch) center to center spacing lines up with metric and imperial layout tools, which supports repeatable drilling when doing multiple installations on a job. The 7-7/8 inch total length offers a defined visual boundary at each end of the pull, which helps align it with panel edges or rail lines for a consistent look from cabinet to cabinet. A 1 inch projection keeps the handle usable without standing far off the face, which can matter in tight galley runs or commercial millwork where clearance is controlled. The 3/8 inch width keeps the handle visually light, which is useful when the design calls for hardware that supports the look of the cabinetry rather than dominating the front. As a zinc die cast part, the pull maintains a uniform shape and detailing across multiples, which helps a bank of doors or drawers present as a matched set when viewed together.

Common Questions About This Berenson Cabinet Pull

Select This Pull For Dull Chrome Cabinet Runs

The Berenson Dual Series 7-9/16 inch center to center dull chrome pull combines zinc die cast construction, a 7-7/8 inch overall length, and a 1 inch projection to support clean, consistent cabinet fronts. Put this pull to work wherever a slim, dull chrome handle matches the cabinet design and mounting layout.