Berenson Square Series 5-1/16" (128 mm) Center to Center Brushed Nickel Pull, - 9284-1BPN-C

Berenson Square Brushed Nickel Pull For Cabinets

Berenson Square brushed nickel pull gives cabinets and drawers a straight-lined grip that suits jobs needing a clean, square style. The pull is part of the Square Collection, so its geometry matches other pieces from the same line for consistent layouts across a room. The zinc die cast material forms a solid metal body that resists everyday handling on frequently used fronts. A brushed nickel finish softens reflection while still reading as metal, which suits both new installations and upgrades where a muted metallic look is preferred. The center to center dimension is 5-1/16 inches, or 128 mm, which matches many standard drilling patterns on cabinet doors and drawer fronts. Overall length is 5-3/4 inches, giving a little overhang at each end beyond the screw centers for a balanced visual on most cabinet widths.

Project-Ready Details For Square Pull Selection

• The 5-1/16 inch (128 mm) center to center spacing matches a common boring size, which helps when aligning new fronts or reusing existing 128 mm hole patterns on replacement jobs.
• The 5-3/4 inch overall length creates a modest reveal beyond the mounting holes, which helps the pull look proportional on medium-width doors and standard drawers without crowding nearby hardware.
• The 1-3/16 inch projection sets the hand grip out from the surface, which provides finger clearance for a straight pull without knuckles hitting the cabinet face on normal use.
• The 1/2 inch width keeps the Square Collection profile slim, which suits tight front layouts where pulls must sit near edge details or adjacent fronts without visually dominating.
• The zinc die cast construction provides a metal base for the pull, which supports repeated opening and closing on kitchen, bath, or shop cabinets that see frequent cycles.
• The brushed nickel finish tones down shine compared to bright metal, which can help the pull blend with other brushed nickel cabinet hardware and nearby brushed fixtures.

Installation Dimensions For Square Pull Layouts

This Berenson Square cabinet pull is built around a 5-1/16 inch (128 mm) center to center dimension, which establishes the drilling pattern for door and drawer fronts. The 5-3/4 inch overall length means each end extends slightly beyond the screw centers, which keeps the pull visually centered when laid out to match rail or stile lines. A 1-3/16 inch projection brings the gripping surface forward from the cabinet face, which allows a hand to wrap behind the pull body in typical cabinet depths. The 1/2 inch width defines a narrow front profile, which helps when setting pulls side by side on narrow drawer banks or close to panel edges. Together these dimensions support straightforward layouts where hole spacing, reveal, and clearance all need to coordinate.

Using The 128 Mm Square Pull In Cabinet Work

Where The Square Collection Pull Fits Best

The Berenson Square cabinet pull with 128 mm center to center sizing fits doors and drawers that are already bored at 5-1/16 inches or are planned around that pattern. On retrofit work, this dimension lines up with many existing European-style drillings, which reduces layout changes when swapping hardware that shares the same spacing. The 5-3/4 inch overall length suits medium cabinet fronts where a compact, rectangular pull is preferred over longer bar styles. With a 1-3/16 inch projection, the pull works on face frame and frameless cabinets where standard overlay doors still leave room for fingers to reach behind the grip. The 1/2 inch width keeps the Square Collection profile lean on narrow drawer fronts, which is useful in banks of drawers where pulls appear in close repetition.

Why These Square Pull Details Support Consistent Results

The 128 mm center to center dimension on this 9284-1BPN-C Berenson pull gives installers a fixed reference for drilling jigs and boring equipment, which helps repeat the same spacing across multiple cabinets. The zinc die cast material maintains a uniform body shape, which supports consistent alignment when many pulls are set in a straight line across a run of doors or drawers. A brushed nickel finish provides a controlled, brushed surface that hides minor handling marks better than mirror-like finishes, which is useful on high-touch kitchen and bath fronts. The 1-3/16 inch projection and 1/2 inch width combine to create a predictable grip depth, which helps users get the same feel on every cabinet where the pull is installed. Being part of the Square Collection also ties this pull into a broader set of matching hardware, which supports cohesive design across base cabinets, wall cabinets, and drawer units.

Common Questions About This Berenson Square Pull

Selecting This Berenson Square Pull For Your Job

The Berenson Square brushed nickel pull with 128 mm center to center spacing and 5-3/4 inch overall length gives a defined set of dimensions for cabinet work. Zinc die cast construction and a brushed nickel finish provide a metal pull that matches Square Collection styling. When a project calls for a slim, square-profile handle with 5-1/16 inch boring, this 9284-1BPN-C model from Wurth Baer Supply offers a clear, repeatable option for both new layouts and replacements.