Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Berenson Square Series 96mm pull gives you a straight, squared profile that works as a cabinet pull or drawer pull where a clean lined look is required. The zinc die cast material forms a solid, rigid handle that keeps its shape under normal cabinet use. The polished chrome finish provides a bright, reflective surface that visually matches other polished chrome decorative hardware on the project. The 3-3/4 inch (96 mm) center to center drilling sets your mounting holes at a common cabinet spacing, helping layouts stay consistent across doors and drawers. Its 4-1/2 inch overall length leaves a small amount of metal beyond each screw hole, which helps cover minor drilling variation while still looking proportional on typical cabinet fronts. A 1-3/16 inch projection sets the grip away from the face enough for fingers to wrap behind comfortably. The 7/16 inch width presents a slim front profile that suits modern cabinet lines.
This Berenson Square Series 96mm pull uses a 3-3/4 inch (96 mm) center to center mounting pattern, so the hole locations are set at that exact spacing when drilling a new door or drawer front. With an overall length of 4-1/2 inches, the pull extends slightly beyond each hole, giving some visual forgiveness when positioning it on rails or drawer fronts while still keeping the ends clear of edge profiles. The 1-3/16 inch projection defines how far the bar stands off the face, which affects finger clearance behind the pull on thicker doors or drawer fronts. At 7/16 inch wide, the bar sits as a slim rectangle, which helps when measuring clearances next to adjacent doors or walls where a bulkier pull might interfere.
This Berenson Square Series 3-3/4 inch center to center polished chrome pull fits decorative hardware projects that call for a modern, squared profile in a bright finish. The 96 mm center to center dimension matches a common drilling standard in cabinet shops, so it suits runs of upper and lower cabinets where repeated spacing matters. The zinc die cast construction forms a solid pull body for everyday cabinet door and drawer use in kitchens, baths, or built-in casework that falls within typical residential or light commercial applications. With its 4-1/2 inch overall length and 7/16 inch width, the pull scales well on many door and drawer sizes, from smaller vanity fronts to medium kitchen doors, without visually overwhelming the face. The polished chrome finish coordinates with other polished chrome decorative hardware and moldings, tying together knobs, hinges, and pulls that share the same surface appearance.
The 3-3/4 inch (96 mm) center to center measurement on this Berenson Square pull establishes a precise drilling pattern that streamlines production on cabinet runs using that standard. By working with 96 mm spacing, jig setups and CNC programs targeted to that distance can repeat this pull across doors and drawers without adjustment. Its 1-3/16 inch projection controls how far the gripping surface stands off the face, allowing spacing plans around adjacent doors, appliance panels, or side walls to factor in that constant depth. The 4-1/2 inch overall length gives a repeatable dimension for laying out pulls at consistent distances from door edges or drawer sides, providing straight lines of hardware across a bank of cabinets. With a 7/16 inch bar width, edge reveals and stile margins can be designed knowing exactly how much of the front will be visually occupied by the pull, helping installers align this piece with other handles and pulls in the same space.
This Berenson Square pull uses a 3-3/4 inch (96 mm) center to center drilling pattern, so hole locations are spaced at 96 mm for mounting on doors or drawers.
The Berenson 9288-1026-C pull has an overall length of 4-1/2 inches, which extends slightly beyond the mounting holes for balanced coverage on typical cabinet fronts.
This polished chrome cabinet pull is made from zinc die cast, providing a solid, molded handle body suitable for standard cabinet door and drawer use.
This cabinet pull projects 1-3/16 inches from the cabinet face, setting the grip out far enough for fingers to wrap behind the bar during normal operation.
The Berenson Square Series pull has a front width of 7/16 inch, giving it a slim appearance while still providing a defined edge to locate by touch.
The Berenson Square 9288-1026-C pull has a polished chrome finish, allowing it to visually align with other polished chrome decorative hardware on the project.
The Berenson Square Series 3-3/4 inch (96 mm) center to center polished chrome pull ties together cabinet doors and drawers that are drilled on the 96 mm standard. With a 4-1/2 inch overall length, 1-3/16 inch projection, and 7/16 inch width, it offers a consistent set of dimensions for planning hardware layouts across a project. The zinc die cast construction and polished chrome finish match projects that rely on bright, square-lined decorative hardware. Use this pull when a 96 mm drilling pattern, squared profile, and polished chrome appearance are the driving requirements for cabinet or drawer fronts.
Sold In: 1 Each
