Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Berenson Square Series 64mm pull is a zinc die cast cabinet handle in a polished chrome finish that provides a modern square profile for drawer and door fronts. The 2-1/2 inch (64 mm) center to center hole spacing places the mounting points at a common retrofit dimension, which supports straightforward replacement of existing pulls drilled at the same spacing. The overall 3-1/8 inch length keeps the pull compact on smaller fronts while still giving enough bar length to grab comfortably during daily use. A 1-3/16 inch projection stands the pull off the surface so fingers clear the door or drawer face, helping with confident opening even on thicker fronts. The 3/8 inch width creates a slim, square look that suits contemporary cabinet lines while still presenting enough surface area for a stable grip under load.
The 2-1/2 inch (64 mm) center to center measurement defines the distance between mounting holes, so it directly governs drilling or alignment when positioning this Berenson Square Series pull on new or existing cabinet fronts. With an overall 3-1/8 inch length, the pull leaves modest overhang beyond each hole, which is useful when working near rail joints or narrow stile edges. The 1-3/16 inch projection determines how far the pull stands off the surface, which affects both knuckle clearance and how far the pull extends into walk paths. At 3/8 inch width, the profile presents a slim face to the user, which influences how the pull sits against flat door and drawer faces in a linear installation.
This Berenson Square Series cabinet pull with 2-1/2 inch (64 mm) center to center spacing suits cabinet doors and drawers drilled on that same dimension, tying into layouts that already follow the 64 mm standard. The 3-1/8 inch overall length and 3/8 inch width make it a practical fit on kitchen, bath, or shop cabinets that use slimmer fronts, because the pull stays within stile and rail boundaries on many common door sizes. A 1-3/16 inch projection provides clearance from the front surface, which works well on thicker decorative fronts where additional stand-off helps fingers reach behind the pull. The polished chrome finish complements projects that already feature chrome decorative hardware, bringing the handle, hinges, and other visible metalwork into a single, consistent look.
The zinc die cast construction of this Berenson 9291-1026-C cabinet pull forms a rigid body, which supports repeated opening and closing cycles without the flex sometimes associated with lighter materials. The square styling defined in the Square collection gives straight edges along the 3/8 inch width, which helps installers visually align multiple pulls along cabinet faces for clean, straight hardware lines. The polished chrome finish on the metal body reflects surrounding light, which makes the pull stand out clearly against many painted or stained surfaces during layout and everyday use. The 2-1/2 inch (64 mm) center to center spacing matches a widely used drilling pattern, which simplifies lining up this pull with existing bore locations during hardware updates. With a 1-3/16 inch projection, the handle projects far enough that users can hook fingers from above, below, or the side, which is helpful on both doors and deep drawers.
The pull has a 2-1/2 inch (64 mm) center to center, a 3-1/8 inch overall length, a 1-3/16 inch projection, and a 3/8 inch width, which together define drilling layout and how far it stands off the door or drawer.
The Berenson 9291-1026-C pull is zinc die cast, giving it a solid metal construction that supports a firm feel when operating cabinet doors and drawers.
The pull uses a polished chrome finish, so it presents a bright, reflective surface that coordinates with other chrome decorative hardware in the same space.
The 2-1/2 inch (64 mm) center to center spacing sets the exact distance between mounting holes, guiding drilling and alignment on cabinet doors and drawers using that pattern.
The 1-3/16 inch projection spaces the pull away from the cabinet face, giving fingers room behind the handle for a secure grip when opening or closing.
This pull belongs to the Square collection, which defines its straight-edged, square-influenced form, helping match other Square collection hardware on the same project.
The Berenson Square Series 2-1/2 inch (64 mm) center to center polished chrome pull combines zinc die cast construction, a compact 3-1/8 inch length, and a 1-3/16 inch projection to support practical use on cabinet doors and drawers laid out on the 64 mm pattern. At 3/8 inch width with Square collection styling, it presents a clean, modern line that coordinates with other chrome hardware on the project. For cabinet work built around 64 mm center to center drilling, this pull offers a straightforward way to match dimension, finish, and visual style in one component.
Sold In: 1 Each
