
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Knape and Vogt 26 inch drawer slides deliver full extension travel, so drawers open the entire depth and expose all stored items, which helps installers and shop users access contents without reaching into a partially hidden space. These 8450FMB 26 slides use ball bearing construction, so the drawer moves along steel bearings rather than metal-on-metal contact, which supports consistent motion over repeated cycles. An integrated soft-close mechanism with Force Management technology slows the closing stroke, so drawers are pulled shut in a controlled way that reduces slamming. The slides are rated to 100 pounds, so they support heavier drawer loads within that capacity, which suits many cabinetry and storage applications. Their unhanded side mount design allows the same member to be used on either side of the drawer, which simplifies layout and inventory. A zinc finish provides a uniform metal appearance suitable for concealed side-mount applications.
These side mount ball bearing drawer slides are designed for side clearances of 1/2 inch plus 1/32 inch minus 0 inch on each side, so case and drawer members can be sized to that gap for proper running fit. The slide height is 1-13/16 inch, so cabinet layouts can allocate this vertical space in the drawer box and opening. A 32 mm pattern is present, so installers working with system-drilled cabinets can align fixing points with that pattern. Recommended fasteners are #7 x 5/8 inch Phillips pan head screws, so fastening locations can be planned around that screw size. A push-in lever at the slide allows the drawer to be removed, so shop work can proceed with drawer boxes taken out when needed. Ball retainer latches and ramps support easy drawer insertion, so drawers can be engaged to the slides without complex maneuvers once the cabinet and drawer are prepared.
The Knape and Vogt 8450FMB 26 slides are part of the 8450 series full extension family, so they fit projects that call for that specific series across multiple drawer sizes. Their 26 inch length suits deeper base cabinets or storage drawers where longer travel is required, so designers can match box depth to this length. The 1-13/16 inch slide height works within many standard drawer side designs, so builders can plan side profiles to clear the slide while keeping interior volume efficient. Because the slides are side mount, they work in cabinets built for that style, so existing construction methods centered on side-mounted hardware can be maintained. The 32 mm pattern on the slide aligns with system-drilled casework, so shops using line boring can integrate these slides into their established drilling programs without rethinking the basic grid.
The full extension action on these 26 inch full extension drawer slides brings the drawer box completely forward, so hardware clearances and reveal lines can be set once and repeated across a run of cabinets. The integrated soft-close function with Force Management technology manages closing force, so drawers return to the same seated position against the cabinet with limited bounce. Three ball bearings per inch distribute loads evenly along the slide, so wear across the length stays more uniform during repeated openings. Side clearance requirements of 1/2 inch plus 1/32 inch minus 0 inch on each side give a clear target for sizing, so box widths can be cut to a single standard dimension for a production run. The push-in lever for drawer removal supports finishing or service work, so drawers can be taken out and reinstalled without disturbing casework. Ball retainer latches and ramps guide the drawer member into position during insertion, so the engagement step is more controlled and reduces rework caused by misalignment at the slide connection.
The Knape and Vogt 8450FMB 26 slides are rated to 100 pounds, which supports many typical drawer loads used in cabinet and storage applications within that weight range.
The 26 inch full extension design allows the drawer to travel its complete length, which exposes the full drawer box depth for easier access to contents at the back.
These side mount ball bearing drawer slides are designed for 1/2 inch plus 1/32 inch minus 0 inch side clearance on each side, which guides case and drawer width sizing.
The slide height is 1-13/16 inch, which helps cabinet builders plan drawer side profiles and opening heights around the hardware envelope.
The slides use three ball bearings per inch with polymer stop cushions, so drawer movement is supported along the length and closing impact is softened.
The recommended fasteners are #7 x 5/8 inch Phillips pan head screws, which sets the screw size and head style for planning drilling and installation.
Knape and Vogt 26 inch drawer slides from the 8450 series combine full extension travel, 100 pound rating, and integrated soft-close action, so they fit projects needing controlled closing and deep drawer access. The defined 1/2 inch plus 1/32 inch minus 0 inch side clearance and 1-13/16 inch height give clear layout targets, which supports consistent case and drawer sizing. When a 26 inch length, side mount configuration, and ball bearing construction match the cabinet design, these 8450FMB 26 slides offer a defined specification for production or one-off builds.
Sold In: 10 Set
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each | KV8404-KIT Mfr# 8404B KIT | Face Frame Bracket kit for 8400 Series Slides, Zinc |
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each | KV8403 Mfr# 8403 | Rear Mounting Brackets for 8417 & 8419 Slides, Zinc |
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 10 Set | KV8450FMB-20 Mfr# 8450FMB 20 | KV8450 20" Over Travel Soft-Close Ball Bearing Drawer Slides, Unhanded Side Mount Zinc Bulk-Pack - 8455FMB 20 |
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each | KV8404-B Mfr# 8404B | Face Frame Bracket for 8400 Slides, Front-Mount, Zinc | ||||
Sold in: 1 Each | KV8404 Mfr# 8404 | Face Frame Bracket for 8400 Series Slides, Front Mount, Zinc |