Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Dierdra knob 1-7/16 inch oil rubbed bronze identifies this Berenson Corporation knob as a compact pull designed for cabinet and millwork doors or drawers, giving you a defined handhold in a small footprint. The knob uses zinc die cast construction, which creates a solid-feeling piece while keeping weight manageable for standard door and drawer fronts. Its oil rubbed bronze finish provides a dark, traditional look that visually grounds lighter cabinet faces. The knob measures 1-7/16 inch in diameter, so it presents enough surface area for a secure pinch without crowding narrow rails or small drawer fronts. A 1 inch width works with the round form to sit neatly on face frames or flat panels. The 1-3/16 inch projection stands the knob off the surface so fingers can hook behind it, which supports smooth opening even on heavier fronts.
This Berenson Dierdra cabinet knob is threaded for an 8-32 x 1 inch screw, so it mates with a standard cabinet knob screw size used across many shop and site installs. That thread pairing lets installers drive the knob down using familiar tools and patterns. The 9/16 inch base diameter defines the contact circle at the mounting hole, so the knob covers the bore while leaving surrounding detail, such as profiling or edge work, visible. With a projection of 1-3/16 inch, the distance from the cabinet face to the outermost point stays consistent from unit to unit, which helps align multiple knobs in straight visual lines across drawer banks.
The oil rubbed bronze finish on this Dierdra knob supports use on cabinets and furniture pieces where a dark, classic metal tone is required across all front faces. At 1-7/16 inch diameter, the knob works well on typical kitchen cabinet doors, utility cabinets, and small drawers, because it provides grip without dominating narrow stiles. The 1 inch width and 9/16 inch base diameter allow the knob to sit comfortably on both flat slab fronts and modestly profiled doors. The zinc die cast construction is appropriate for indoor woodworking applications served by Wurth Baer Supply products, so it fits naturally into cabinet shop workflows that already specify decorative hardware and moldings.
The 8-32 x 1 inch screw size on this Berenson 4071-1ORB-P knob ties directly into standard drilling and boring patterns, helping installers maintain consistent mounting depth across a run of doors. The noted tooth on the bottom of the knob provides extra grip at the contact point, so when torque is applied during tightening, the knob seats and resists twisting over time. That small feature supports straight, repeatable knob orientation on aligned drawer fronts. The 1-3/16 inch projection keeps knobs standing off the surface at a predictable distance, which maintains uniform sightlines and pulling feel across banks of cabinets. Together, the defined dimensions and screw interface help shops produce installations with even spacing and long-term alignment.
The Berenson Dierdra knob has a 1-7/16 inch diameter, 1 inch width, 9/16 inch base diameter, and 1-3/16 inch projection, giving installers clear sizing for layout and finger clearance.
The 4071-1ORB-P knob uses zinc die cast material, which creates a solid, consistent body suitable for cabinet doors and drawers in woodworking projects.
The knob has a tooth on the bottom for grip, allowing it to bite into the surface slightly so it stays oriented and resists rotation after tightening.
This Dierdra cabinet knob is specified with an 8-32 x 1 inch screw size, aligning with standard cabinet knob screw threads for straightforward mounting.
The oil rubbed bronze finish gives the knob a dark, traditional appearance, helping it coordinate with cabinetry and other decorative hardware in similar tones.
The Dierdra knob projects 1-3/16 inch from the cabinet face, providing finger space for a secure pull while keeping the hardware close to the front.
The Berenson Dierdra Series oil rubbed bronze 1-7/16 inch knob brings defined measurements and a standard 8-32 x 1 inch screw interface to cabinet jobs, supporting predictable layout across doors and drawers. Its zinc die cast construction and 1-3/16 inch projection provide a familiar pull feel that integrates smoothly into woodworking installations supplied by Wurth Baer Supply. Using these fixed dimensions and finish details, shops and serious DIY users can match this knob across multiple pieces and maintain consistent hardware alignment project to project.
Sold In: 1 Each
