Salice Futura 9" Soft-Close Full Extension Undermount Drawer Slides, Zinc - A7555/229 CP6

Salice Futura Undermount Drawer Slides For Smooth Use

Salice Futura undermount drawer slides give a soft-close, full-extension motion, so drawers travel their full length and then slow at the end of stroke for controlled closing. The 9 inch Futura Series slides are built as undermount slides, keeping hardware hidden under the drawer for a clean cabinet look during use. These Salice America slides use precision Delrin 100 bearings, which support a perfectly silent motion when the drawer opens and closes in daily operation. The slides are rated for a 75 lb dynamic load and a 100 lb static load, so the drawer system can handle normal stored weight while still moving smoothly. The Futura Series is made in Italy, which reflects a consistent manufacturing source for shops that repeat the same slide across multiple jobs. The 9 inch (229 mm) length targets shallow drawers where full extension is still required.

Key Futura Slide Details That Help The Job

• The Futura Series undermount design hides the drawer slides under the box, which keeps the interior clear and lets installers present a more finished look on exposed cabinetry.
• Precision Delrin 100 bearings provide a perfectly silent motion, so opening and closing drawers in kitchens, baths, or office cabinetry stays quiet over repeated cycles.
• These slides are compatible with either 1/2 inch or 5/8 inch drawer side thickness, allowing the same hardware to be used across common drawer box constructions in a shop.
• Depth adjustment through slotted holes gives a bit of front-to-back positioning range, helping align drawer faces with adjacent fronts during final fit-up.
• The front locking clips have an easy-to-reach height adjustment lever with plus 2.5 mm range, which lets installers tweak vertical alignment at the front without reworking the box.
• A 75 lb dynamic load rating and 100 lb static rating support typical contents while maintaining slide function, so drawers continue to travel smoothly at the rated weights.

Installation And Fit Details For These Slides

These Salice Futura undermount drawer slides install using number 6 flat head wood screws, so the mounting interface matches a common fastener style for cabinet shops. Depth adjustment by slotted holes in the slide members provides front-to-back play during installation, which helps align the drawer front with the cabinet face frame or panel once the box is hung. The front locking clips on this system feature an easy-to-reach height adjustment lever with plus 2.5 mm travel, so installers can fine-tune vertical reveal at the front edge without altering the drawer or cabinet. The 9 inch (229 mm) slide length works where cabinet depth is limited, while still delivering full extension for full access to the drawer interior in use.

How These 9 Inch Slides Work In Practice

Using 9 Inch Futura Slides In Cabinet Projects

The 9 inch Futura Series undermount drawer slides are designed as full-extension slides, so even short drawers pull fully out for visibility of contents in narrow base cabinets or bath vanities. Because the slides are compatible with 1/2 inch and 5/8 inch drawer side thickness, a shop can run either material for drawer boxes and rely on the same part number A7555/229 CP6. The undermount design supports clean interior drawer sides, which benefits built-ins where the drawer construction is visible. With a 75 lb dynamic load rating, these Salice America slides handle typical contents such as bathroom items, desk supplies, or light kitchen storage while still soft-closing reliably. The 100 lb static rating means the slide set can hold drawers at rest under load without sagging within its rating.

Adjustment And Mounting Details That Reduce Rework

Each Futura undermount slide uses slotted holes for depth adjustment, which allows installers to shift the slides slightly forward or back during mounting so drawer fronts line up with adjacent faces. The front locking clips integrate a height adjustment lever with plus 2.5 mm range, giving a quick way to correct top and bottom reveal at the front without planing or remaking the drawer. These slides use number 6 flat head wood screws for attachment, matching a standard screw type that seats flush in countersunk holes for a solid fit against cabinet members. The 9 inch (229 mm) length can either be side mounted or mounted using the specialized plastic rear mount socket, which offers flexibility in different cabinet constructions where direct rear mounting is preferred. Taken together, these installation features help reach clean margins and consistent alignment across a run of drawers using the same Salice Futura undermount system.

Common Questions About Salice Futura 9 Inch Slides

Selecting Salice Futura Slides For Your Drawers

Choosing these Salice Futura undermount drawer slides gives a 9 inch, full-extension option with soft-close action and Delrin 100 bearings for silent motion. The compatibility with 1/2 inch and 5/8 inch drawer sides, plus slotted depth adjustment and front height adjustment, supports efficient installation and alignment on built projects that use this A7555/229 CP6 Futura Series slide.