Salice Futura 21" Soft-Close Full Extension Undermount Drawer Slides, Zinc - A7555/533 CP6

Salice Futura 21 Inch Undermount Drawer Slides

Salice Futura 21 inch undermount drawer slides give a full-extension, soft-close action that supports drawers opening fully while controlling closing speed for quieter use in busy cabinet installations. These Salice America Futura Series slides are undermount drawer slides, so the runners sit beneath the drawer box and keep the hardware out of sight for a cleaner interior. The Futura Series is made in Italy, which reflects a tightly controlled manufacturing process that supports consistent performance across multiple cabinets on a job. Precision Delrin 100 bearings support a perfectly silent motion, so each open and close cycle stays smooth and quiet in residential or commercial environments. These slides are compatible with either 1/2 inch or 5/8 inch drawer side thickness, letting you standardize on this runner across common drawer constructions without changing hardware. As full-extension slides, they allow access to the full drawer length, which helps installers deliver better storage access in deep cabinets.

Key Salice Futura Details For Cabinet Projects

• The Futura Series undermount slides are made in Italy, so production tolerances are controlled to support repeatable performance when installing multiple drawers in the same run.
• Precision Delrin 100 bearings provide a perfectly silent motion, which reduces noise transfer through cabinetry and helps maintain a smooth feel over repeated use.
• Compatibility with either 1/2 inch or 5/8 inch drawer side thickness allows one slide model to serve different box constructions, simplifying planning and shop setups.
• Depth adjustment by slotted holes enables fine front-to-back positioning, which helps align drawer faces with the cabinet front and neighboring fronts.
• Front locking clips feature an easy to reach height adjustment lever with plus or minus 2.5 mm travel, giving vertical tuning of the drawer front without rebuilding the box.
• A 75 lb dynamic and 100 lb static load capacity supports typical drawer contents while maintaining slide function, helping keep motion consistent under load.

Undermount Slide Mounting And Adjustment Notes

These Salice Futura undermount drawer slides install with #6 flat head wood screws, so the runner fastening matches common cabinet screw patterns and sits flush in the countersinks. Depth adjustment by slotted holes gives a small front-to-back shift range, useful when aligning inset or full-overlay drawer fronts to surrounding parts. The front locking clips incorporate an easy to reach height adjustment lever with plus or minus 2.5 mm of movement, allowing quick up-or-down tuning of the drawer front from the cabinet interior. The 21 inch length supports applications where a 21 inch runner is required, matching cabinet depths designed around this slide size. The slide design delivers full extension, which lets the drawer clear the face frame or cabinet front and improves access to the rear of the drawer box.

Using These Slides In Drawer Construction

Where These Salice Futura Slides Are Applied

These Salice Futura Series undermount drawer slides are part of the Undermount Drawer Slides product class, so they are suited to drawer box constructions using concealed runners under the drawer. The slides are compatible with 1/2 inch or 5/8 inch drawer side thickness, which matches common solid wood or panel drawer box builds in cabinet shops. The Futura Series is described as soft-close and full extension, so it supports installations where controlled closing and complete access to stored items are required, such as kitchen, bath, or office cabinetry. A 75 lb dynamic load capacity gives working support for moving drawers under expected loads, while the 100 lb static capacity addresses at-rest loading without compromising slide design limits. Because the slides are made in Italy with precision Delrin 100 bearings, they contribute to higher-end cabinet projects where smooth, quiet drawer movement is part of the specification.

How Slide Details Support Accurate, Repeatable Results

The full extension travel of these slides lets the drawer open to its full 21 inch length, which simplifies layout of internal organizers or hardware that depends on clear access to the rear. Precision Delrin 100 bearings create a perfectly silent motion that reduces friction variation, helping drawers track consistently across a bank of cabinets. Depth adjustment by slotted holes offers a controlled way to shift the slide location, helping align drawer fronts during final fit without changing the cabinet box. The front locking clips use an easy to reach height adjustment lever with plus or minus 2.5 mm of movement, allowing small vertical changes to correct front reveals across multiple drawers. Installing with #6 flat head wood screws keeps the mounting secure in typical cabinet side materials and sets the screw heads flush to avoid interference with the runner action. Together, these verified details help installers and shops achieve a uniform appearance and motion profile from cabinet to cabinet.

Common Questions About A7555/533 CP6 Slides

Selecting Salice Futura Slides For Your Project

Choosing these Salice Futura 21 inch soft-close full-extension undermount drawer slides lets you pair an undermount design with soft-close action and full access to drawer contents. Compatibility with 1/2 inch or 5/8 inch drawer side thickness supports common shop practices when building boxes. The combination of 75 lb dynamic and 100 lb static load capacities aligns with everyday storage demands in cabinetry using this runner class. Using the specified #6 flat head wood screws ties directly into standard cabinet fastener inventories. For projects calling for a made in Italy Salice America undermount solution with precise adjustment and quiet motion, this A7555/533 CP6 slide provides the verified characteristics needed to plan and execute consistent drawer installations.