Salice Futura 15" Soft-Close Full Extension Undermount Drawer Slides, Zinc - A7555/381 CP6

Salice Futura Undermount Slides For Smooth Drawers

Salice Futura undermount drawer slides give drawers a concealed, full-extension soft-close action that supports precise cabinet work. These Salice Futura undermount drawer slides are part of the Futura Series and are built in Italy for consistent, predictable performance on shop and jobsite projects where drawer motion and alignment need to stay tight over time.

The full-extension design lets the drawer travel its full 15 inch length so contents remain accessible from the front of the cabinet, which simplifies layout in kitchen, bath, or shop storage installations. A soft-close mechanism finishes the closing stroke in a controlled way, which reduces drawer slamming and keeps stresses off the cabinet case and joinery.

Precision Delrin 100 bearings inside the slide create a perfectly silent motion by separating moving metal components, which matters when drawers see daily use or where multiple drawers run side-by-side in banks. The Futura Series undermount configuration supports clean cabinet interiors and lets fabricators focus on tight reveals and front alignment rather than working around visible hardware on the drawer sides.

Key Futura Slide Details That Support The Job

• The Futura Series undermount configuration hides the hardware under the drawer, which supports modern cabinet layouts where clean interior sides and uninterrupted drawer boxes are important for both appearance and clearances.
• Full-extension travel on this 15 inch slide brings the drawer fully forward, which helps installers confirm clearances at adjacent faces and allows end users to see and reach stored items at the back without rearranging cabinet interiors.
• Delrin 100 bearings provide a perfectly silent motion by eliminating metal-on-metal sliding, which helps maintain a refined feel in high-use cabinetry and reduces noise transfer through casework in residential or commercial spaces.
• Compatibility with either 1/2 inch or 5/8 inch drawer side thickness means one slide family can serve common drawer box constructions, which simplifies shop standards and reduces layout changes between different cabinet lines.
• Front locking clips with an easy-to-reach height adjustment lever offer plus 2.5 mm of vertical tuning at the drawer front, which helps installers dial in reveals and align multiple drawer fronts quickly without remaking boxes or altering cabinet openings.
• A 75 lb dynamic load capacity and 100 lb static load capacity support typical drawer storage loads, which gives designers room to use these slides in a range of residential and light commercial storage applications without rethinking basic load planning.

Installation And Adjustment Details For These Slides

These Salice America undermount full-extension slides install to the cabinet using #6 flat head wood screws, which gives installers a familiar fastener interface that works well in typical cabinet-grade materials. Slotted holes in the slide provide depth adjustment, so the cabinet-side mounting position can be tuned slightly forward or back to match drawer length and face alignment without reboring fixed holes.

The front locking clips deliver height adjustment at the drawer connection point, with an easy-to-reach lever that provides plus 2.5 mm of vertical travel. That built-in adjustability supports fine-tuning of drawer front reveals within a run of cabinets, which saves layout time and reduces rework when faces need a small final shift.

The web description notes that the 9 inch (229 mm) Futura slide variant can be either side mounted or mounted using a specialized plastic rear mount socket, highlighting that the Futura family addresses different mounting scenarios within the same design language and motion profile.

Using Salice Futura Slides In Cabinet Projects

Where These A7555/381 CP6 Slides Are Applied

This model, identified as A7555/381 CP6 with a 15 inch length, fits projects requiring a full-extension undermount drawer slide with soft-close action and a concealed mounting position. In residential cabinet work, the Futura Series undermount format helps keep drawer interiors clear by attaching beneath the drawer box rather than along the sides, so standard 1/2 inch or 5/8 inch drawer sides remain free for joinery or decorative treatments.

The 75 lb dynamic load capacity gives these slides the strength to handle typical drawer contents in kitchens, baths, home offices, and similar spaces, while the 100 lb static load rating offers additional support when drawers are at rest. Because these slides accept both 1/2 inch and 5/8 inch side thicknesses, a single specification can cover multiple cabinet lines in a shop that switches between these common box constructions without changing core hardware choices.

The Delrin 100 bearing system supports repeated opening and closing cycles with a perfectly silent motion, which is particularly valuable in multi-drawer installations such as base cabinet banks, closet systems, or workstations where several drawers might be operated in quick succession and any noise would be multiplied.

How Futura Adjustment And Motion Support Consistent Results

The depth adjustment provided by slotted holes in the Futura Series slide lets installers shift the slide position to match drawer length and front flushness, which is useful when cabinet dimensions vary slightly from plan. Small fore-and-aft adjustments help keep drawer fronts co-planar with surrounding doors and faces without altering the cabinet box or drawer construction.

At the front, locking clips with an easy-to-reach height adjustment lever provide plus 2.5 mm of movement, which allows precise tuning of reveals above and below each drawer front. This vertical adjustability matters during final fitting, where even minor misalignment can be visible across a bank of drawers or between adjacent cabinets.

The full-extension travel works together with the soft-close action so the drawer can be pulled completely out on its 15 inch runners and then guided smoothly back into the cabinet on Delrin 100 bearings. That pairing of reach and controlled closing helps protect the cabinet face and hardware from impact loads and supports a consistent feel across all drawers built with this Futura Series undermount slide.

Salice America manufacturing in Italy contributes to the precision of the slide components, which in turn supports repeatable performance when drawers are installed across an entire project. For shops standardizing on a single undermount platform, the combination of soft-close function, concealed undermount positioning, depth adjustment, height adjustment, and defined load capacities makes this Futura A7555/381 CP6 model a practical choice for cabinets built to consistent tolerances.

Common Questions About Futura Undermount Slides

Select This Futura Slide For Precise Drawer Action

The Salice Futura 15 inch soft-close full-extension undermount drawer slides, model A7555/381 CP6, combine concealed mounting, Delrin 100 bearing motion, defined load ratings, and practical depth and height adjustments to support accurate cabinet drawer installations. By matching 1/2 inch or 5/8 inch drawer sides and using standard #6 flat head wood screws, these undermount slides fit smoothly into established shop construction methods while providing the soft-close and full-extension performance expected in modern cabinetry.