Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
The Salice Futura 12 inch undermount drawer slide is a concealed, full-extension runner with integrated soft-close, built for drawer boxes with 1/2 to 5/8 inch sides. It suits both face-frame and frameless cabinets and brings the complete drawer out to the cabinet face at the end of every pull.
A 12 inch undermount is the right choice for shallow cabinet drawers: spice pull-outs, bathroom vanity drawers, island drawers in tight base cabinets, and upper-cabinet roll-out trays. At full extension, a 12 inch drawer comes fully clear of the cabinet opening, putting the whole box within reach. The 75 lb per pair rating covers daily loads in these applications without stepping up to a heavier slide. In a face-frame cabinet, the rear of the slide needs support from matching Futura rear mounting brackets, which are sold separately and are specific to this series. In a frameless cabinet, the slide fastens directly to the flat cabinet side.
The Futura runner is steel with a zinc finish, running on roller bearings for a pull that stays smooth and quiet under load. Because the slide mounts concealed beneath the drawer box, the zinc finish is a functional, corrosion-resistant coating rather than a decorative one — nothing shows when the drawer is open. The integrated soft-close mechanism is built into the slide body, so there are no add-on dampers to source or install separately. This is an indoor slide; for wet or exterior environments, a different material class is required.
Cabinet shops building compact vanity, kitchen, or island drawers with 1/2 to 5/8 inch sides will find the 12 inch Futura a clean fit — the slide is sized for shorter boxes where a longer runner would require unnecessary cabinet depth. Designers specifying concealed hardware for frameless European-style cases get the same slide without modification. Homeowners replacing worn hardware in an existing shallow drawer can match this slide to their box provided the box is built to Salice's published specification for the Futura series, including nominal length, box-width formula, bottom recess, rear notch, and the drilling for Futura-specific front locking devices.
Salice Futura front locking devices are series-specific accessories. Confirm whether they are included or need to be ordered separately before completing your hardware list.
No. This version is engineered for 1/2 to 5/8 inch (up to 16mm) drawer sides. For 3/4 inch material, use the Salice Futura 19mm side-thickness model instead.
Yes. Face-frame installs require Futura-specific rear mounting brackets to support the back of the slide behind the frame. These brackets are sold separately and are not interchangeable with rear brackets from other brands or series.
Per pair — that is the standard way load ratings are stated for undermount drawer slides in this catalog.
Only a box built to Salice's published Futura specification will seat correctly. The nominal length, box width, bottom recess, rear notch, and locking-device drilling all need to match the series spec before the drawer will install and adjust properly.
The Salice Futura 12 inch slide gives shallow drawers the same concealed, full-extension, soft-close performance that longer runs get — sized right so the cabinet depth works, not against it.
Sold In: 1 Pair
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Pair |  UBA750.010 Mfr# A750.010 | Salice Futura Front Locking Device, Left Hand/Right Hand, Black, A750.010 | ||||
Sold in: 1 Pair |  UBA710.610 Mfr# A710.610 | Salice Futura Front Locking Device, Left Hand/Right Hand, Black, A710.610 | ||||
Sold in: 1 Each |  UBAGSKXR5 Mfr# AGSKXR5 | Salice Futura 75 lb Rear Mounting Bracket, AGSKXR5 | ||||
Sold in: 1 Each |  UBAGSKXX5 Mfr# AGSKXC5 | Salice Futura 75 lb Rear Mounting Bracket, AGSKXC5 |
