Festool Rubin 2 sanding sheet is a 60 grit, 8-hole, hook and loop aluminum oxide sanding sheet sized 3-1/8 inches by 5-1/4 inches that is designed for wood-finishing applications, so it targets typical shop sanding tasks on wood surfaces. This Rubin 2 abrasive is described as perfect for all wood-finishing applications, which positions it as a general-purpose choice when working through sanding steps on solid wood or wood-based material. The sheet is engineered to quickly shed wood fibers, which means loose fibers break away instead of loading the abrasive face, keeping the cutting surface open. That shedding action is stated to eliminate clogging from wood fibers and pitch, so the abrasive stays exposed during sanding. Festool documents a 30 percent faster removal rate from this design, which reduces sanding time at each grit step. The same anti-clogging behavior is stated to provide up to 30 percent longer sheet life, which extends usable time before a sheet is spent.
This Festool Rubin 2 60 grit sanding sheet uses a hook and loop attachment, so it presses onto matching hook and loop pads without tools, allowing quick swaps when changing grits in a sanding sequence. The 8-hole pattern in the sheet coordinates with tools that share this 8-hole dust layout, so dust can be drawn through the sheet surface to support sanding visibility on wood. With a 3-1/8 inch by 5-1/4 inch sheet size, the abrasive works with sanders or blocks designed around this footprint, keeping contact predictable on narrow work like frames and cabinet parts. The 60 grit rating positions this sheet toward more aggressive cutting early in a wood-finishing progression, so it removes material and levels surfaces before stepping to finer Rubin 2 grits. Festool describes Rubin 2 as designed for rapid grit progression from 80 to 220, which frames this 60 grit sheet as a coarse step that leads into the faster middle and finishing grits on wood surfaces.
This Festool Rubin 2 60 grit aluminum oxide sanding sheet is defined as perfect for all wood-finishing applications, so it fits into cabinet shops, millwork, and woodworking environments that repeatedly sand wood components. The 3-1/8 inch by 5-1/4 inch footprint works on rails, stiles, and panel edges where a compact pad is favored, so it suits workpieces that follow similar dimensions. The sheet uses an 8-hole hook and loop configuration that matches tools with the same hole pattern, so it can participate in dust-extracting sanding setups. With a 60 grit abrasive, this sheet performs the heavier cutting and leveling early in a sanding sequence, so deeper imperfections and milling marks on wood can be addressed before moving to finer Rubin 2 grits described for rapid progression between 80 and 220. The Rubin 2 formulation is noted as designed specifically for wood, so its cutting behavior is tuned around how wood fibers respond to abrasion.
The Festool Rubin 2 sheet is described as designed to quickly shed wood fibers, so loose fibers separate from the surface rather than pack the abrasive face, which maintains a more open cutting surface over time. This shedding behavior is stated to eliminate clogging caused by pitch and wood fibers, so sanding remains more consistent across the usable life of each sheet. Festool lists a 30 percent faster removal rate for Rubin 2, so each pass can take off more material at 60 grit relative to prior designs, which can reduce overall sanding passes on wood components. At the same time, Festool notes up to 30 percent longer sheet life, so each abrasive sheet stays in service longer before it is spent. Rubin 2 is described as designed for rapid grit progression from 80 to 220, so once this 60 grit step has handled heavier cutting, later grits in the Rubin 2 system can be advanced through quickly toward a finished wood surface.
The Festool Rubin 2 sanding sheet is described as perfect for all wood-finishing applications, so it is intended for sanding and finishing tasks on wood surfaces in typical woodworking environments.
The 60 grit Festool Rubin 2 sheet provides relatively aggressive cutting early in a sanding sequence, so it handles stock removal and leveling before moving into finer Rubin 2 grits.
The Festool 499047 Rubin 2 sheet measures 3-1/8 inches by 5-1/4 inches, so it matches sanders or sanding pads designed around that rectangular footprint for controlled contact on wood parts.
The Rubin 2 sanding sheet is stated to deliver a 30 percent faster removal rate and up to 30 percent longer sheet life, so sanding can cover more wood with fewer abrasive changes.
This 8-hole Rubin 2 sanding sheet uses a hook and loop attachment, so it presses onto compatible pads quickly and allows straightforward sheet changes during wood-finishing work.
The Rubin 2 sheet is designed to quickly shed wood fibers and eliminate clogging from pitch, so the abrasive surface stays exposed longer and maintains more consistent sanding performance.
The Festool Rubin 2 60 grit 8-hole hook and loop aluminum oxide sanding sheet brings a defined 3-1/8 inch by 5-1/4 inch size, wood-focused formulation, and documented speed and life gains, so it supports efficient wood-finishing workflows. With design claims of a 30 percent faster removal rate and up to 30 percent longer sheet life, this sheet targets both sanding throughput and abrasive usage in shops that work wood every day. Choosing this Rubin 2 60 grit sheet positions your sanding process to handle early-stage stock removal on wood while staying aligned with a Rubin 2 system described as built for rapid grit progression toward finished surfaces.
Sold In: 1 Box