Festool Rubin 2 180 Grit sanding sheet is an 8-hole hook and loop aluminum oxide abrasive sheet sized 3-1/8 inch by 5-1/4 inch, so it targets wood-finishing work where a rectangular pad and dust extraction pattern are needed. The Rubin 2 formulation is described as perfect for all wood-finishing applications, which positions this 180 grit as a solid step in a full finishing sequence from stock prep to pre-finish sanding. Rubin 2 is designed to minimize the time spent on each level, so each grit change takes fewer passes in the same area. The abrasive is designed to quickly shed wood fibers, which keeps the surface from clogging as you move across resinous or dusty woods. That behavior keeps the aluminum oxide cutting points open, helping the 180 grit stay effective longer between sheet changes during repeated passes.
The 3-1/8 inch by 5-1/4 inch size matches an 80 x 133 millimeter footprint, so it suits rectangular pads built for that contact area on compatible sanders. An 8-hole pattern in the Rubin 2 80x133 P180 sheet aligns with matching dust extraction layouts, allowing sanding dust to be pulled through the pad instead of collecting under the abrasive. That helps keep the cutting surface clear while also reducing fine dust between the sheet and the work surface. The quick hook and loop attachment lets the sheet be pressed onto the pad and removed without tools, which supports frequent grit changes as work moves through 80 to 220 grits. This mounting style also lets the sheet be repositioned on the pad if needed during a sanding session.
This Festool Rubin 2 sanding sheet sits in the abrasive sheets category, so it is intended for use on compatible sanding pads rather than as a hand pad or roll. The 180 grit in the Rubin 2 range fits into a rapid grit progression from 80 to 220, so it serves as a middle-to-fine step when refining surfaces after heavier leveling passes. Because Rubin 2 is described as perfect for all wood-finishing applications, this 80x133 P180 sheet suits cabinet components, furniture parts, and interior woodwork where a consistent scratch pattern is needed before moving to finer grits. The aluminum oxide abrasive bonded to the sheet provides the cutting action on wood fibers, so each stroke at 180 grit both smooths the surface and prepares it for the next grit in the sequence.
Rubin 2 is designed to quickly shed wood fibers, so as sanding dust and loose fibers hit the sheet, they release instead of loading into the abrasive surface. That shedding action, combined with design aimed at preventing clogging from pitch and wood fibers, supports the stated 30 percent faster removal rate because more of the abrasive face remains active. With less clogging, the sheet also achieves up to 30 percent longer sheet life, so each Rubin 2 180 grit sheet stays in service for more passes across the work before being replaced. The rapid grit progression behavior means less time moving from 80 to 220, so in practice, the 180 grit step can be completed with fewer sheet changes and fewer passes. The quick hook and loop attachment further supports that workflow by allowing fast swaps between grit levels without interrupting the sanding sequence.
The Festool Rubin 2 180 grit sanding sheet is described as perfect for all wood-finishing applications, so it is focused on sanding wood surfaces during finishing stages.
The Rubin 2 80x133 P180 sheet delivers a 30 percent faster removal rate, so each pass removes more material, shortening time spent on each sanding level.
The Rubin 2 180 grit sheet is designed to prevent clogging from pitch and wood fibers, leading to up to 30 percent longer sheet life during wood-finishing work.
The Festool Rubin 2 180 grit hook and loop aluminum oxide sheet measures 3-1/8 inch by 5-1/4 inch, matching an 80 by 133 millimeter sanding pad footprint.
The 8-hole pattern on the Rubin 2 sanding sheet matches dust extraction layouts, allowing debris to be pulled through the pad and keeping the abrasive face clearer.
The Rubin 2 abrasive line is designed for rapid grit progression from 80 to 220, placing 180 grit as a key step before final fine sanding.
The Festool Rubin 2 180 grit sanding sheet combines an 80x133 millimeter size, 8-hole hook and loop mounting, and an aluminum oxide face tailored to wood-finishing applications. With design focused on minimizing time at each level, achieving a 30 percent faster removal rate, and delivering up to 30 percent longer sheet life, this P180 sheet supports efficient, repeatable sanding as you progress from 80 to 220 grits on cabinets, furniture, and interior woodwork.
Sold In: 1 Box