Festool Rubin 2 100 grit sanding sheet is a 3-1/8 inch by 5-1/4 inch aluminum oxide abrasive sheet designed for wood-finishing applications, so it targets the surface preparation stages that matter on doors, panels, and furniture parts. The Rubin 2 design is intended for all wood-finishing applications, which lets installers and shop teams stay on one abrasive line from rough leveling through finish sanding. The sheet uses an 8-hole pattern with hook and loop backing, so it mates with compatible sanders while still allowing straightforward sheet changes during a production run. Rubin 2 is designed to minimize the time spent on each level with a 30 percent faster removal rate, which helps move through sanding steps with fewer passes. The abrasive is also designed to provide a 30 percent longer sheet life, so each sheet stays productive for more linear feet of sanding before being swapped out.
This Rubin 2 100 grit sheet is designed for rapid grit progression from 80 to 220, so it fits as an efficient mid-step in a multi-grit sequence on wood. The quick hook and loop attachment lets the sheet be applied to a compatible sander pad without alignment tools, so grit changes between stages stay straightforward. The 30 percent faster removal rate means each pass at 100 grit takes down raised fibers more efficiently, which shortens the sanding window before moving to finer grits. Because the abrasive is designed to quickly shed wood fibers and avoid clogging from pitch, it continues to cut cleanly during extended use at this grit level. The 30 percent longer sheet life keeps the 100 grit stage running on the same sheet longer, so production teams can maintain a consistent scratch pattern across multiple workpieces.
This Festool Rubin 2 aluminum oxide sanding sheet is designed for all wood-finishing applications, so it fits naturally into cabinet shops, millwork operations, and finish carpentry setups. The 3-1/8 inch by 5-1/4 inch format suits smaller sanders that are common on face frames, stile and rail parts, and trim elements. With its 8-hole design and hook and loop backing, the sheet attaches to the matching pad while allowing dust extraction through the abrasive surface, so sanding fine wood fibers remains cleaner. The 100 grit rating bridges the gap between initial leveling and final finishing, so it supports flattening sealer-ready surfaces on doors, drawer fronts, and similar components. Because Rubin 2 targets wood-specific work, it aligns with workflows centered on solid wood and wood-based panels that need consistent finish prep.
Rubin 2 is designed to minimize the time spent on each level with a 30 percent faster removal rate, so each 100 grit pass removes raised fibers and minor defects with fewer strokes. That faster cut helps shops move from 80 toward 220 more quickly, which shortens overall sanding time per part. The abrasive is designed to quickly shed wood fibers, which prevents clogging from pitch and debris and keeps the cutting points exposed, so the surface finish remains even across the work area. Because Rubin 2 is designed to prevent clogging, it delivers up to 30 percent longer sheet life, so each 100 grit sheet stays in service across more pieces before performance drops. This longer life supports stable scratch patterns over runs of similar parts, which helps maintain consistent finishing quality from one component to the next.
The Festool Rubin 2 100 grit sanding sheet is designed for all wood-finishing applications, so it primarily handles intermediate sanding steps between coarse leveling and fine finishing.
The Rubin 2 30 percent faster removal rate reduces sanding time at each grit level, so installers and shop crews can progress from 80 toward 220 with fewer passes per surface.
Rubin 2 is designed for up to 30 percent longer sheet life, so each 100 grit sheet sands more parts before being changed, supporting consistent finish quality over multiple components.
The quick hook and loop attachment lets the 100 grit sheet fasten to the pad without tools, so grit changes and replacements fit smoothly into production or jobsite workflows.
The 8-hole design provides paths for dust extraction through the abrasive, so the cutting surface stays clearer while sanding wood and helps maintain a more uniform scratch pattern.
Rubin 2 is designed for rapid grit progression from 80 to 220, so the 100 grit sheet acts as an efficient mid-stage, smoothing previous scratches ahead of finer finishing passes.
Festool Rubin 2 100 grit sanding sheet combines a wood-focused abrasive design with a 3-1/8 inch by 5-1/4 inch, 8-hole hook and loop format, so it suits wood-finishing applications that demand steady, repeatable sanding steps. The 30 percent faster removal rate and up to 30 percent longer sheet life are designed to keep sanding stages productive across multiple parts. For installers and shops focused on efficient progression from 80 to 220 on wood components, this Rubin 2 100 grit sheet offers an abrasive option tailored to that workflow.
Sold In: 1 Box