
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Festool Rubin 2 120 grit sanding sheet is a wood-finishing abrasive sheet designed for all wood-finishing applications, so it fits naturally into cabinet, furniture, and millwork sanding workflows. The sheet uses aluminum oxide abrasive, which cuts efficiently on wood surfaces so material removal stays consistent from part to part. Its 120 grit rating targets the mid-stage of finishing, so it bridges between initial leveling grits and final smoothing passes for a controlled scratch pattern. The 8-hole design in the sheet aligns with compatible dust extraction patterns, so sanding debris is drawn away from the surface to help keep the abrasive cutting instead of riding on dust. A hook and loop backing on the sheet provides quick attachment to a matching pad, so abrasive changes between grits or between jobs take minimal time. The 3-1/8 inch by 5-1/4 inch size matches detail and pad sanders in that format, so it suits narrow rails, frames, and smaller flat panels.
This abrasive sheet uses a hook and loop backing for quick attachment, so it presses directly onto a compatible hook-and-loop sanding pad without additional fastening steps. The 3-1/8 inch by 5-1/4 inch dimensions match pads of the same size, so the abrasive aligns edge to edge with the pad for full contact and predictable scratch coverage. With its 8-hole layout, the sheet seats over pads designed with the same pattern, so dust extraction ports remain open and continue pulling sanding dust through the holes during operation. The P120 grit rating identifies it as part of a rapid grit progression from 80 to 220, so it slots logically after coarse leveling passes and before finer finishing grits in a standard sanding sequence. Because Rubin 2 is designed around wood-finishing applications, it fits well into finishing-room setups that rely on controlled steps between grits.
This Festool Rubin 2 120 grit sanding sheet is intended for all wood-finishing applications, so it supports work on cabinet components, solid wood parts, and veneered panels. The aluminum oxide abrasive is optimized for wood, so it cuts wood fibers while maintaining a sanding pattern suited to finishing rather than heavy stock removal. With a size of 80 x 133 mm, listed as 3-1/8 inch by 5-1/4 inch, the sheet fits detail sanders in that footprint, so it reaches into narrower rails, stiles, and small field areas on doors. The 8-hole hook and loop format pairs with compatible sanders using the same hole pattern, so dust collection can stay active right under the sanding surface, which supports cleaner workpieces before finishing steps. Because Rubin 2 is designed to quickly shed wood fibers and eliminate clogging, the abrasive face stays more open, so sanding remains effective across longer runs of similar wood parts.
Rubin 2 is designed around a 30% faster removal rate, so each sanding pass at 120 grit takes away material more quickly and helps bring a surface to the next finishing stage in less time. This higher removal rate means an operator can move efficiently from 80 through 120 toward 220 in the rapid grit progression, so the scratch pattern refines step by step without extended dwell time at each grit. The same Rubin 2 design delivers up to 30% longer sheet life, so each sheet stays in service for more parts before changeover, which stabilizes sanding results during longer production runs. By preventing clogging from pitch and wood fibers, the sheet keeps its abrasive grains exposed, so the cut stays consistent from the first panel to the last in a batch. Quick hook and loop attachment further supports repeatable work, since swapping a worn P120 sheet for a fresh one is a simple pull-and-press action that keeps the sander setup unchanged while restoring cutting performance.
This Rubin 2 sanding sheet is described as perfect for all wood-finishing applications, so it is designed specifically around sanding wood surfaces during finishing sequences.
The P120 grit rating places this sheet in the middle of the rapid grit progression from 80 to 220, so it refines coarse scratches while preparing the surface for finer finishing grits.
Rubin 2 is designed for a 30% faster removal rate, so each pass at 120 grit removes more material per stroke and shortens time spent on each sanding level.
Rubin 2 is designed to quickly shed wood fibers and eliminate clogging, so pitch and dust do not load the surface and the abrasive stays sharp over more parts.
The 8-hole hook and loop design matches sanders with the same hole pattern, so dust extraction pulls debris through the sheet and helps maintain an even sanding action.
The 3-1/8 inch by 5-1/4 inch size matches pads built for 80 x 133 mm sheets, so it covers smaller surfaces and edges while staying fully supported by the sander pad.
Festool Rubin 2 120 grit sanding sheet, identified as Rubin 2 80x133 P120 with manufacturer part number 499050, is built for wood-finishing applications where controlled removal and consistent results matter. Its aluminum oxide abrasive, 8-hole hook and loop layout, and 3-1/8 inch by 5-1/4 inch format support everyday sanding on wood components with a 30% faster removal rate and up to 30% longer sheet life. For shops moving parts efficiently from 80 through 220 grit, this P120 sheet gives a defined middle step that sheds wood fibers and resists clogging, so sanding at this level stays productive.
Sold In: 1 Box