Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Festool Rubin 2 40 grit sanding sheet is an 8-hole hook and loop aluminum oxide abrasive sized 3-1/8 x 5-1/4 inches, so it fits sanders built around the 80 x 133 mm pad and standard dust extraction layouts for this format. The Rubin 2 abrasive is engineered specifically for wood-finishing applications, so it focuses removal on wood fibers instead of random stock, which keeps the scratch pattern consistent across bare wood surfaces. Its aluminum oxide grain sheds wood fibers as it cuts, reducing clogging from pitch and dust so the abrasive surface stays exposed for more aggressive cutting during coarse sanding passes. With Rubin 2, the sheet achieves a 30 percent faster removal rate compared to Festool's previous Rubin generation, so each pass removes more material on leveling, flattening, or heavy prep work. This same anti-clogging behavior also delivers up to 30 percent longer sheet life, so fewer sheets are used over the course of a job.
The Rubin 2 80 x 133 P040 sheet dimension aligns with sanding pads using that metric footprint, so the sheet registers at the pad edges and keeps the abrasive area fully supported against the work. Its hook and loop backing bonds across the entire pad face, holding the sheet flat so the 40 grit surface maintains uniform contact during each stroke. The 8-hole pattern lines over matching pad holes, channeling dust into a connected extraction system so the sheet can keep cutting instead of riding on debris. Because Rubin 2 is built for rapid progression from 80 to 220 grits, this 40 grit position acts as the aggressive starting point in a system that moves quickly toward a finish-ready surface. The 30 percent faster removal rate means each pass at this coarse stage removes more material, which shortens time spent flattening or stripping surfaces before switching to finer grits.
This Festool Rubin 2 abrasive sheet is defined for all wood-finishing applications, so it serves as a core abrasive for cabinet parts, furniture components, and general woodworking stock that will be finished. The 40 grit cut focuses on the earliest sanding steps, such as knocking down saw marks, flattening joints, or preparing rougher faces before moving toward intermediate grits. Because the sheet is tuned to shed wood fibers rather than load with pitch, it maintains bite on resinous woods over a longer run, which supports continuous sanding on larger panel runs or multiple parts in sequence. The rectangular 3-1/8 x 5-1/4 inch format tracks easily along narrow parts like rails and stiles, helping the user keep the abrasive on the face without drifting over edges. With Rubin 2 explicitly aimed at wood finishing, this sheet integrates into sanding sequences that end in higher grits while keeping the early stages efficient.
The Rubin 2 system delivers a 30 percent faster removal rate at this 40 grit level, so fewer passes are needed to reach target flatness or remove milling marks, directly reducing sanding time on each component. Its anti-clogging behavior, driven by the way Rubin 2 sheds wood fibers and limits pitch buildup, extends sheet life by up to 30 percent, which means each sheet covers more square footage before performance tails off. The hook and loop mounting simplifies grit changes as the sequence moves from coarse to finer abrasives, so the workflow from 80 through 220 can stay uninterrupted. By keeping dust pulled through the 8-hole pattern into an extraction system, the sheet runs with less debris under the pad, supporting a more consistent scratch pattern that responds predictably when the next grit is applied. Together, these Rubin 2 traits support repeatable sanding results and more efficient progress from aggressive stock removal to final wood surface preparation.
The Festool Rubin 2 abrasive sheet is designed for all wood-finishing applications, so it is used primarily on bare wood surfaces as part of a sanding sequence.
The 30 percent faster removal rate means each pass of the sheet removes more wood, so leveling, flattening, and heavy prep steps take less sanding time.
The 30 percent longer sheet life lets each Rubin 2 sheet sand more surface area before changing, so fewer sheets are used across a project.
The aluminum oxide abrasive on this sheet provides a tough cutting surface for wood fibers, supporting consistent, aggressive stock removal at 40 grit.
The 8-hole hook and loop design supports dust extraction through matching pad holes and allows quick attachment, helping maintain clear cutting and fast grit changes.
Rubin 2 is designed for rapid grit progression, so its cutting and anti-clogging behavior reduce time spent at each grit step between 80 and 220.
The Festool Rubin 2 40 grit 80 x 133 mm sheet combines an aluminum oxide abrasive, 8-hole hook and loop backing, and a wood-focused formulation to support efficient sanding on bare wood. Its 30 percent faster removal rate and 30 percent longer life mean more work is completed with fewer sheet changes at the coarse stage. For shops moving frequently from aggressive stock removal into full wood-finishing sequences, this Rubin 2 sheet provides a defined starting point that aligns with sanding pads built around the 3-1/8 x 5-1/4 inch format.
Sold In: 1 Box