Deltana Free Swinging Full Mortise Hinges, Screw-on Polished Nickel - CH2020U14

Deltana Solid Brass Cabinet Hinges For Precise Swing

Deltana solid brass cabinet hinges give a cabinet door a free swinging action, so the leaf pivots smoothly as the door opens and closes, which matters when you want consistent movement on frequently used doors. These hinges are part of Deltana Enterprises, Inc. catalog, so the CH2020U14 part number ties directly to a repeatable product choice across projects. The hinge is built as a semi-concealed cabinet hinge, so part of the hardware stays out of sight when the door is closed, which helps a finished cabinet keep a cleaner look while still using a durable mortised joint. The design is described as full mortise, meaning both the door and frame receive a cutout for the leaves, which keeps the hinge snug to the wood and supports long-term alignment in cabinet use.

Key Hinge Details That Support Cabinet Work

• The 2 x 2 hinge size sets the basic leaf dimensions, so the CH2020U14 hinge suits small cabinet doors where a compact footprint keeps the stile from looking crowded and allows layout alongside other hardware.
• The mounting type is described as full mortise, so the leaves sit flush in cut pockets, which helps the knuckle line up accurately along the edge and supports even gaps between door and cabinet frame.
• The corners are specified as square, so layout lines stay simple and chisel work follows straight cuts, which suits installers who prefer to route or hand-mortise without shaping rounded corners.
• Each hinge has six holes in the hinge leaf, which spreads the load into the door and frame, helping the small-format 2 x 2 hinge support cabinet doors without concentrating stress at a single fastener.
• The hinge thickness is listed as .093 inch, so the leaf carries solid material at the joint, which helps the knuckle resist twist in everyday cabinet use and supports a sturdy feel when the door swings.

Full Mortise Hinge Layout And Screw Mounting

The mounting information lists full mortise construction with #7 x 3/4 wood screw fastening, so the CH2020U14 hinge ties directly into typical cabinet-grade lumber or plywood without oversized pilot holes. This screw size suits the six-hole hinge pattern, so each fastener has enough bite to hold in the door edge while staying proportional to the compact 2 x 2 hinge leaves. The square-corner format means the mortise pockets follow straight cuts, so hinge seating depends on crisp, right-angle walls rather than curved routing, which favors accurate depth control during cabinet door prep.

Using The CH2020U14 Hinge In Cabinet Projects

Where This 2 x 2 Polished Nickel Hinge Fits

The SAP description defines this product as a 2 x 2 hinge, polished nickel, so the CH2020U14 hinge fits applications where a small cabinet door needs compact hardware that still shows a finished metal surface at the edge. The web description identifies these as solid brass cabinet hinges, so the base material is brass while the outer finish is polished nickel, which lets the hinge match polished nickel cabinet hardware while carrying the underlying brass weight and feel. The category lists Hinges, Semi-Concealed Face-Frame Hinges, and Full Mortise Hinges, so this hinge belongs in cabinet work where a face-frame layout and mortised leaves are standard, giving the door a traditional, inset-style swing across the frame.

Details That Support Repeatable Cabinet Door Results

The construction is described as solid brass, so the hinge body uses brass rather than a lighter material, which helps the knuckle and leaves stand up to repeated cabinet door cycles over time. The polished nickel finish on that brass gives a bright surface at the exposed portions, which matters when the hinge edge needs to coordinate with polished nickel pulls or knobs in a cabinet run. The description notes that Deltana brass cabinet hinges come in an array of fine finishes with ball tip finials as standard, so the CH2020U14 hinge carries ball tip finials at the ends of the hinge pin, giving the pivot a finished look that reads deliberately decorative in traditional cabinet layouts.

Common Questions About This Deltana Cabinet Hinge

Selecting This CH2020U14 Hinge For Your Cabinets

The CH2020U14 solid brass cabinet hinge brings a 2 x 2 leaf size, .093 inch thickness, and full mortise installation together with a polished nickel finish, so the same hinge can satisfy both visual and structural expectations on cabinet doors. The six-hole pattern per hinge and #7 x 3/4 wood screw specification suit typical cabinet materials, giving each door a familiar installation approach. For projects built around polished nickel hardware and semi-concealed, full mortise cabinet hinges, this Deltana model offers a defined set of dimensions and details ready for repeat use.