Deltana Solid Brass Cabinet Hinges For Precise Doors

Deltana solid brass cabinet hinges come in an array of fine finishes with ball tip finials as standard, so each hinge supports functional cabinet doors while presenting a polished, finished look that matches surrounding hardware on built-ins, furniture, or shop projects. The 2 x 2 hinge size works on many cabinet doors where compact hardware is needed but a solid feel is still important during everyday use. The semi-concealed hinge and full mortise mounting type place part of the hinge in the cabinet edge, which helps align the door while keeping most of the hardware out of sight when the door is closed. This Deltana full mortise cabinet hinge with square corners fits projects that are already machined with square-corner mortises, so layout and routing stay straightforward on face-frame or similar cabinet construction.

Key Deltana Full Mortise Hinge Working Details

• The hinge mounting type is full mortise, so the leaves sit in cut mortises in the door and frame, helping keep the door edge tight to the cabinet and supporting a clean reveal line on finished work.
• Square corners on the hinge match square-cut mortises, which avoids the extra step of rounding corners during routing and helps doors sit consistently when working across multiple cabinet openings.
• The hinge uses solid brass, giving the leaves and knuckle a solid construction that supports normal cabinet door cycles in kitchen, bath, or furniture installations where metal choice is important.
• The finish is PVD polished brass, so the visible portions of the hinge present a bright brass appearance that coordinates with other polished brass hardware across the project.
• Each hinge has ball tip finials as standard, which cap the hinge pin ends and give the knuckle a finished profile that matches traditional and decorative cabinet styles.
• The hinge has six holes in the hinge, providing multiple fastening points so the door and frame connection stays firm along the leaf length during repeated opening and closing.

Full Mortise Hinge Fit, Holes, And Thickness

The mounting type is full mortise, so both door and frame receive matching mortises sized to the 2 x 2 hinge leaves, which helps the barrel sit correctly while keeping the door gap controlled along the stile. Square corners on the hinge work directly with straight bit mortising, so layout lines stay crisp and trimming time stays predictable on face-frame cabinets. There are 6 holes in the hinge, which spreads fastening load along the leaf and allows each #7 x 3/4 wood screw position to pull the brass tight to the cabinet material. The hinge thickness is .093 inch, so the mortise depth targets that thickness and supports a flush fit between door edge and frame without proud hardware.

Using This Semi-Concealed Full Mortise Brass Hinge

Where This 2 x 2 Brass Hinge Fits Best

This Deltana semi-concealed hinge is part of the semi-concealed hinges product class, so it works on cabinets where part of the hinge is visible while the rest is let into the mortise, supporting traditional cabinet looks. The 2 x 2 hinge, noted as a 2 inch by 2 inch hinge in the description, suits smaller cabinet doors and face-frame layouts where a compact footprint keeps margins and rails from looking crowded by hardware. The Deltana solid brass cabinet hinges construction supports cabinet doors in residential or shop-built projects where brass hardware is used across knobs, pulls, and other fittings. The polished brass finish matches other polished brass elements, so runs of wall cabinets or furniture pieces keep a consistent color tone at each hinge location.

Details That Support Repeatable Mortising And Alignment

The full mortise mounting type works well when routing multiple door and frame edges for a run of cabinets, because every mortise targets the same 2 x 2 hinge leaf dimensions and .093 inch thickness, helping reveal lines repeat across openings. Square corners simplify layout with straight-edge guides, so mortises stop cleanly at each corner and the hinge leaf shoulders register against flat wood surfaces without additional chisel work. Six holes in the hinge allow a consistent screw pattern, so each #7 x 3/4 wood screw location can be predrilled using the brass leaf as a template and then driven to draw the hinge tight without shifting. Ball tip finials as standard define the visible hinge pin ends, so when doors are hung in a row, each knuckle shows a uniform ball detail that aligns visually along the cabinet face. The PVD polished brass finish keeps the visible portions of the hinge matching other polished brass cabinet components from Deltana Enterprises, Inc., tying the project hardware together under one finish callout and manufacturer part number CH2020CR003.

Common Questions About CH2020CR003 Brass Hinges

Select This 2 x 2 Brass Hinge For Mortised Cabinets

The Deltana full mortise cabinet hinge in PVD polished brass, identified as manufacturer part number CH2020CR003, combines a 2 x 2 leaf size, .093 inch thickness, and solid brass construction for cabinets planned around mortised hinges. The semi-concealed hinge style, full mortise mounting type, and square corners align with shop workflows that use routed mortises and polished brass hardware across doors. For projects calling out Deltana solid brass cabinet hinges with ball tip finials as standard, this model gives a defined specification to carry through design, layout, and installation on matching cabinet runs.