Deltana solid brass cabinet hinges anchor doors with a material that resists deforming under typical cabinet loads, which helps doors track consistently over time in everyday use. These hinges are designed for cabinets where a semi-concealed look is preferred, so the hardware does its job without dominating the face of the work. The polished chrome finish provides a bright, reflective surface that suits jobs calling for a clean, modern appearance. Full mortise mounting lets the hinge sit flush into the edge of the door and frame, supporting accurate gaps when the mortises are cut to match the 2 x 2 inch leaf size. Square corners on the leaves suit layouts where straight chisel cuts are faster than radius routing, which can speed installation on small runs. Ball tip finials are standard, giving the hinge a finished, traditional detail when the knuckle is visible on the project.
The mounting type listed as full mortise means each hinge leaf is set into a recess on both the cabinet door and the frame, so the 2 x 2 inch leaves sit flush and help control the reveal around the door. Holes in the hinge are drilled for wood screws, so the hinge is screwed directly into the cabinet components rather than using alternate fasteners. The specified wood screw size of #7 x 3/4 inch matches typical cabinet door and frame stock thickness, giving threads that bite securely without excessive penetration beyond most rails and stiles. The hinge thickness of .093 inch defines how deep the mortise needs to be, which guides layout when setting depth stops to keep the hinge faces even with the surrounding wood.
This hinge is identified as a semi-concealed hinge in the full mortise hinge category, placing it in cabinet and furniture work where part of the hardware is hidden when the door is closed. The 2 x 2 inch size fits small to medium cabinet doors where a compact hinge is appropriate and door weight is within the range solid brass leaves handle in typical cabinet construction. The hinge is classified as a semi-concealed face-frame hinge, so it suits cabinet builds that use a face frame rather than frameless construction. The polished chrome finish lines up visually with other chrome cabinet components on the project, helping maintain a consistent hardware look across doors and drawers. Deltana branding connects this hinge with the broader line of Deltana cabinet hardware, which matters when a project is standardized around one manufacturer and finish family.
The full mortise mounting type lets both leaves sit flush when mortised to the .093 inch hinge thickness, which helps keep doors from binding as they swing because the hinge barrels sit in a consistent plane. Square corners on the leaves mean each mortise can be cut with straight-edged tools, supporting tight, clean edges that register the hinge without rounded gaps at the corners. The presence of six holes in the hinge spreads the load across multiple #7 x 3/4 inch wood screws, which reduces stress on any single fastener and supports long-term stability in cabinet doors. Solid brass material carries the knuckle and pin, which helps resist wear at the pivot point during repeated opening and closing cycles. The ball tip finials cap the hinge pin, which prevents the pin end from presenting a raw edge and provides a neat visual stop at the top and bottom of the barrel on visible applications.
The CH2020U26 hinge is a semi-concealed full mortise hinge for cabinet and furniture doors, fitting projects that use face-frame construction and call for a compact 2 x 2 inch hinge size.
The full mortise mounting recesses both leaves to the .093 inch thickness, helping the hinge sit flush so cabinet doors swing without rubbing and maintain consistent reveals when installed to layout.
The 2 x 2 inch size keeps the hinge compact, which suits small to medium cabinet doors and leaves more room on narrow face frames for other layout elements such as adjacent hinges.
The .093 inch thickness defines mortise depth, guiding how deep to cut recesses so hinge leaves sit level with surrounding wood and avoid forcing the door out of plane.
The #7 x 3/4 inch wood screws match common cabinet rails and stiles, giving enough thread engagement into solid wood without projecting excessively beyond typical cabinet components.
The polished chrome finish coordinates with other chrome hardware, while the ball tip finials finish the hinge pin ends for a cleaner appearance on exposed cabinet and furniture doors.
The Deltana solid brass cabinet hinges in model CH2020U26 combine a 2 x 2 inch footprint, .093 inch leaf thickness, and full mortise mounting, giving a compact hinge that sits flush in typical cabinet stock. Semi-concealed classification and square corner leaves support face-frame cabinet layouts where a traditional look and straightforward chisel mortising are preferred. The polished chrome finish and ball tip finials align with projects calling for visible, finished hardware details. The #7 x 3/4 inch wood screw specification ties directly into standard cabinet construction dimensions. For cabinet or furniture doors matching these parameters, this hinge offers a defined, repeatable set of dimensions and mounting details to build around.