Deltana solid brass cabinet hinges give cabinets a hinge made from solid brass, which supports precise joinery where consistent hinge geometry matters over time. The array of fine finishes lets a shop or installer match hinge color to different cabinet styles without changing the basic hinge layout. Ball tip finials as standard create a finished, traditional hinge profile that stays visible and deliberate on semi-concealed applications. The 2 x 2 hinge size keeps proportions small for cabinet doors, helping face-frame and casework doors swing without overpowering narrow rails and stiles. The semi-concealed hinge design fits the semi-concealed hinges product class, so part selection aligns with cabinets that show only select hinge features. Oil rubbed bronze finish defines the appearance, allowing this part to serve darker or classic finish schedules alongside matching knobs and pulls.
The full mortise mounting type means each leaf sits within a cutout, so the hinge stack is controlled by the .093 inch thickness and not by surface mounting. Square corners work with common straight-router templates, so cabinet shops can cut identical mortises along a cabinet run for repeatable door gaps. The 2 x 2 dimension keeps the hinge compact, which suits smaller cabinet doors where rail height or face-frame width limits hinge length. Six screw holes use the #7 x 3/4 wood screw spec, giving each hinge enough fasteners to resist racking forces when doors are pulled repeatedly. Oil rubbed bronze over solid brass allows the same mortise pattern, screw size, and layout to carry through while matching dark decorative hardware plans.
This Deltana full mortise semi-concealed hinge fits cabinet projects that call for a 2 x 2 hinge footprint and solid brass construction. The semi-concealed hinges category places this part in applications where the hinge knuckle and ball tip finials stay visible, while the leaf mortises into the door and frame. Oil rubbed bronze finish ties the hinge into darker cabinet and furniture programs, so doors and frames hold a consistent tone from hinge to pull. The square-corner leaf geometry aligns with straight-cut mortises on face-frame or frameless cabinets that use traditional hinge locations. The 2 inch by 2 inch size keeps hinge placement flexible on smaller doors, giving room above and below the leaf on stiles and rails.
The .093 inch hinge thickness gives a clear target depth when routing mortises, so multiple doors along a run can share the same reveal with minimal fine-tuning. Six screw holes per hinge allow the #7 x 3/4 wood screws to distribute load, which helps doors stay aligned when subjected to frequent opening and closing. Solid brass material means the hinge body provides a stable bearing surface around the pin, shaping a consistent swing path for the cabinet door. Ball tip finials as standard define the hinge end profile, helping installers visually align a set of hinges along a door edge because the knuckles and tips share a common reference. The full mortise mounting style lets the door close with the leaves recessed into the prepared pockets, maintaining the intended cabinet line when doors are shut.
The CH2020U10B is a Deltana solid brass cabinet hinge in the semi-concealed hinges product class, so it suits cabinet doors where part of the hinge remains visible.
The full mortise mounting type sets the hinge leaves into routed mortises, keeping the hinge stack height defined by the .093 inch thickness for consistent reveals.
The hinge is described as a 2 x 2 hinge, giving a compact footprint that fits typical cabinet door rails and stiles without crowding the edges.
Square corners match mortises cut with straight router passes, so installers can use simple jigs and avoid rounding or squaring mismatched corner shapes.
This hinge uses #7 x 3/4 wood screws, so pilot drilling and mortise planning can follow that diameter and depth in common cabinet materials.
The oil rubbed bronze finish sets a dark, traditional appearance, helping the hinge visually coordinate with similar-finish knobs, pulls, and other cabinet hardware.
This Deltana full mortise semi-concealed hinge brings a 2 x 2 footprint, solid brass construction, and oil rubbed bronze finish together in one part number. The .093 inch thickness, square corners, and #7 x 3/4 wood screw spec support predictable mortising and fastening steps in the shop or on site. For cabinet runs built around semi-concealed hinges with visible ball tip finials, this hinge keeps layout, appearance, and mounting details aligned from door to door.