Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
The GSlide G-Slide series 14 inch full-extension side-mount ball bearing drawer slide is a 100 lb rated pair designed for kitchen, office, shop, and utility drawers where a stay-closed detent matters as much as smooth travel. The hold-in anti-rebound feature keeps the drawer from bouncing back open after a firm push, making this slide a natural fit for busy workspaces and anywhere a drifting drawer would be a nuisance.
A standard free-sliding drawer stays wherever it is left — fine in low-traffic cabinets, but a problem on a shop bench, in a rolling cart, or in a base cabinet that gets slammed shut in the middle of a busy cook. The hold-in anti-rebound detent on this slide catches the drawer member as the drawer closes and holds it there until the drawer is intentionally pulled open. There is no spring assist and no damping: the detent simply stops the drawer from rebounding. That distinction matters — this is not a soft-close slide and it is not a self-close slide. It is a slide that stays put. Pair it with short-run drawers in a 14 inch slide where full access to the back of the box is still required.
The slide members are cold-formed steel with a zinc electroplate finish. Zinc is the working standard for side-mount ball bearing slides used indoors: corrosion-resistant through years of normal service, functional rather than decorative, and largely hidden beside the open drawer box. This is an indoor slide — not rated for wet, washdown, or exterior environments.
The 14 inch length suits shallower base cabinets, bathroom vanities, nightstands, and office pedestals where a longer slide would exceed the interior depth. At 100 lb per pair, it handles everyday drawer loads without being oversized for the job. The 1/2 inch side clearance per side is standard for this class of slide: build the drawer box 1 inch narrower than the cabinet opening and both slides seat correctly. The non-handed design simplifies ordering on multi-drawer projects — one part number covers every position. In face-frame cabinets, rear mounting brackets are required to support the back of the slide; those brackets are sold separately and are series-specific.
A soft-close slide uses a damper to slow the drawer over the last inch of travel and settle it shut quietly. The hold-in anti-rebound detent on this slide does neither of those things — it is a mechanical catch that holds the closed drawer in place and prevents it from bouncing back open after a firm push. There is no damping and no spring. If you need damped closing, look at a soft-close model in the same length.
No. 14 inches is the closed length of the slide. Because this is a full-extension slide, the drawer member travels approximately the full slide length, bringing the entire drawer out to the cabinet face. Slide length and drawer travel are two separate specs.
No. The G-Slide is non-handed — both slides in the pair are the same part and fit either side of the drawer. Order one pair per drawer.
The slide requires 1/2 inch of clearance per side. Build the drawer box 1 inch narrower than the cabinet opening to seat both slides correctly.
Yes. In a face-frame cabinet the slide's back end needs support from rear mounting brackets. Brackets are sold separately and are specific to the slide series — confirm the correct bracket before ordering.
The G-Slide 14 inch slide covers the short-run drawer market with full extension, a 100 lb rating, and a hold-in detent that keeps the drawer closed when the work gets busy — a practical combination that handles the drawer and stays out of the way.
Sold In: 1 Set
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  GY4340RB Mfr# GS4340 RB | GSlide Rear Mounting Bracket, GS4340 RB |
