Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
26 inch full extension drawer slide travel lets the drawer open to its full length, so the entire 26 inch depth is accessible and usable in cabinets or casework where reach to the back matters. The full extension design uses telescopic movement on ball bearings, which supports smooth motion under load and helps drawers open and close consistently in daily use. A 100 lb load rating means the slide is built to carry up to 100 pounds, supporting heavier drawer contents in residential or commercial woodworking projects. This drawer slide is part of the G-Slides Series and is a side mount drawer slide, so it works in common cabinet layouts that use side-mounted hardware. The slide is unhanded, so a single slide design works on either side of the drawer, simplifying selection for installers.
This product is a side mount drawer slide, so it is designed to attach along the drawer sides and cabinet sides in typical framed or frameless cabinet configurations that accept side mounting. The slide provides 1/2 inch, or 12.7 mm plus 0.8 mm minus 0, side clearance, which defines the required gap between the drawer side and the cabinet for proper fit and smooth movement. Flexible mounting tabs self-adjust to the side clearance, which helps the slide conform within the allowable tolerance window and supports easier alignment during installation. The slide uses 32 mm and traditional mounting hole patterns, which lets installers match existing cabinet drilling layouts or use standard measurements for new work.
The GS4200 26 drawer slide is a side mount, ball bearing drawer slide in the G-Slides Series, so it is suited for drawer applications that call for side-mounted, full extension hardware. With a 26 inch length and full extension travel, this slide matches drawer boxes designed around a 26 inch slide, making it relevant for medium-depth cabinet drawers in kitchens, offices, or storage units that need full access to contents. The zinc finish, described as Anochrome Finish: Zinc, provides a metal surface treatment on the slide, which supports use in typical indoor woodworking environments where standard zinc-finished hardware is common. The slide meets or exceeds KCMA, BIFMA, and BHMA performance standards, which indicates that it has been tested against recognized criteria for cabinet hardware, supporting its use in projects that look for those performance references.
The hold-in anti-rebound function, described as hold-in detent, is built into the slide to help keep the drawer held in the closed position, which can reduce the tendency for drawers to drift open from minor cabinet movement. Telescopic movement on ball bearings carries the drawer through its full extension, so load is transferred along the rolled profile for better load transfer, supporting motion that feels more controlled under weight. The rolled profile construction contributes to how the slide channels load, which matters when drawers are filled toward the 100 lb load rating, helping maintain performance over repeated use cycles. The flexible mounting tabs self-adjust to side clearance, so once the drawer and cabinet are built to the 1/2 inch side clearance requirement, the tabs help the slide sit correctly in that space, aiding consistent alignment across multiple cabinets. The non-handed design and disconnect feature allow the same GS4200 26 slide type to be used on either side and removed when needed, which supports straightforward drawer removal and reinstallation during service or adjustments. The slide is backed by Knape & Vogt's limited lifetime warranty, indicating manufacturer support over the product's life in normal service conditions.
The GS4200 26 is a GSlide side mount, full extension, ball bearing drawer slide, so it mounts to the drawer sides and delivers full access along ball bearing runners.
The GS4200 26 has a 26 inch length and full extension travel, so it is suited to drawer boxes designed around a 26 inch side mount slide depth.
The drawer slide has a 100 lb load rating, so it is designed to handle drawers carrying up to 100 pounds of contents in normal cabinet applications.
The GS4200 26 uses 1/2 inch, or 12.7 mm plus 0.8 mm minus 0, side clearance, so cabinet and drawer construction must follow that gap for proper movement.
The drawer slide's hold-in detent helps keep the drawer held closed at the end of travel, which reduces minor rebound and supports a clean closed position.
The GS4200 26 offers 32 mm and traditional mounting hole patterns, so it aligns with system-based drilling as well as more conventional cabinet layouts.
The GS4200 26 from Wurth Baer Supply combines full extension travel, a 100 lb load rating, and side mount installation in a G-Slides Series design, making it suitable where 26 inch side mount drawer slides with ball bearing movement and zinc finish are required.
Sold In: 1 Set
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  GY4340RB Mfr# GS4340 RB | GS4270 Bracket for Drawer Slides, Rear-Mount |
