Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This 28 inch full-extension side-mount ball bearing drawer slide from GSlide's G-Slide series is built for deeper cabinet runs where shorter slides fall short. Rated 100 lb per pair with a hold-in anti-rebound detent, it keeps deep pantry drawers, base cabinet pull-outs, and utility drawers tracking smoothly and staying shut between uses.
Most base cabinet pull-outs and pantry drawers run 24 inches deep or deeper. A 28 inch slide fits those runs without cramping the drawer box at the back or leaving the slide underused at the front. Full extension means the entire drawer comes forward to the cabinet face at open, so canned goods stacked at the rear, spice jars, or folded linens are visible and reachable without digging. The hold-in anti-rebound detent is especially useful here: a heavy pantry drawer pushed shut with any force can bounce back, and the detent stops that. Push the drawer closed and it stays closed until pulled.
The G-Slide series is cold-formed steel throughout, with ball bearings running in full-length raceways between the slide members. Steel bearings in formed steel raceways carry load consistently over the full travel — there is no soft spot near the front and no drag at extension. The zinc finish is the standard corrosion protection for indoor side-mount slides. It is not a decorative finish and it is not stainless, but it handles the indoor humidity and cleaning cycles a kitchen or utility cabinet sees without issue.
Cabinet shops building deeper base cabinets and pantry towers will find the 28 inch length the right match for drawers in the 26 to 28 inch depth range. Contractors fitting out utility rooms, laundry rooms, or garage storage benefit from the 100 lb rating at this length, where a loaded drawer can easily approach that figure. The non-handed design keeps things simple at installation: one SKU covers both sides of every drawer, and the 1/2 inch side clearance per side is the same standard fit shared across the side-mount ball bearing category. In face-frame cabinet work, rear mounting brackets are required to support the back of the slide; those are sold separately and must match the series.
Slide length and drawer travel are two separate numbers. A 28 inch full-extension slide brings the entire drawer out to the cabinet face, but the actual travel distance depends on how the cabinet and drawer box are built. The slide length is the closed measurement used to match the slide to the cabinet depth.
They are different mechanisms. The hold-in anti-rebound detent on this slide is a mechanical catch that keeps the drawer closed and stops it from bouncing back when shut firmly. It does not slow or damp the closing motion. Soft-close uses a damper to decelerate the drawer over the last inch of travel and settle it shut quietly. This slide has the detent, not a damper.
No. The G-Slide series is non-handed, so both slides in the pair are identical and either one installs on either side of the drawer.
Face-frame construction sets the cabinet side back from the front frame, so the rear of the slide needs a bracket to sit level. Rear mounting brackets for face-frame installs are sold separately and must be chosen to match the series. A frameless cabinet mounts the slide directly to the panel without additional brackets.
Confirm the sold-as unit on the product page before ordering. Side-mount ball bearing slides in this catalog are typically sold as pairs, but verify the quantity shown at checkout covers both sides of your drawer.
When the cabinet is deep and the drawer needs to come all the way out, the 28 inch G-Slide gives you full extension, a stay-closed detent, and a 100 lb rating in one straightforward zinc-finished steel slide — no mismatched left-right parts, no oversized profile, just the length and features the job calls for.
Sold In: 1 Set
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  GY4340RB Mfr# GS4340 RB | GSlide Rear Mounting Bracket, GS4340 RB |
