Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Fastcap Speed Brace 8x12 primed shelf and countertop supports are rigid, heavy duty workstation and countertop brackets that provide a 1,000 lb load rating per pair, so a pair carries substantial static loads in demanding shop, office, or residential layouts. The 8 inch by 12 inch size defines the working leg dimensions, giving clear planning geometry when laying out overhangs or shelf depths. The brace is primer coated, so the primed surface arrives ready for field finishing to match surrounding cabinetry or wall colors without extra prep. Classified under shelf, closet and garage organization shelving and accessories, this part fits directly into storage, bench, or counter support designs. As a workhorse bracket, it supports heavy tops while its design details focus on alignment, fastening, and routing of cables along the run.
The 1-1/2 inch by 1-1/2 inch notching system for quick alignment and installation gives a repeatable reference when positioning multiple Fastcap Speed Brace 8x12 primed units along a wall, which streamlines layout on long counters. When the brace is oriented using either long or short side, installers can turn the 12 inch leg under deeper tops or use the 8 inch leg under shallower shelves, tailoring geometry without changing part numbers. Cable management holes present in the brace keep routing options available where power strips, chargers, or electronics live on the surface. Countersunk screw holes tie the bracket into studs or substrates while keeping the fastening plane flush, which simplifies fitting laminated or solid surfaces against the support.
This Fastcap shelf and countertop support sits in the workstation and countertop brackets class, so it directly serves bench tops, counters, and heavy shelving within storage or work zones. The 8 inch by 12 inch geometry lets it support typical depths found in tops and shelves while staying compact against walls or cabinet ends. Load rating at 1,000 lb per pair supports substantial static weight such as dense materials or tooling, giving project planners confidence when specifying fewer but stronger supports along a span. Because FASB Anchors are designed to be used with metal studs, this solution integrates into steel stud partitions commonly found in commercial or basement build-outs that require rigid top support at specific stud intervals.
The 1-1/2 inch by 1-1/2 inch notching system for quick alignment and installation provides an indexing feature, so installers can hook or reference the brace in the same way at every location and reduce measuring between brackets. Cable management holes through the brace open a path to pull cable along the bracket line, which keeps wiring tight to structure and frees knee space beneath desks or counters. Countersunk screw holes keep fastener heads below the bearing surface, giving tight contact between bracket and top, which helps distribute load evenly instead of on a few high points. Orientation using either the long or short side means the same SB-8X12PRIMED part can work for multiple depth conditions, reducing leftover stock while still aligning with the same installation pattern and fastener locations.
The Fastcap Speed Brace 8x12 primed load rating at 1,000 lb per pair indicates two braces share that static load, supporting heavy countertops or shelves when spaced appropriately along a run.
The 1-1/2 x 1-1/2 notching system for quick alignment and installation gives a built-in reference, helping position multiple brackets consistently relative to framing or edges without complex layout.
The bracket can be oriented using either long or short side, so you can place the 12 inch leg under deeper tops or the 8 inch leg under shallower shelves with the same part.
The cable management holes let cables route through the brace, keeping wiring tight to structural members and helping maintain cleaner, less obstructed space beneath the work surface.
Countersunk screw holes seat screw heads below the brace surface, so shelves or countertops sit flat on the metal, improving contact and reducing rocking at fastening points.
FASB Anchors are designed to be used with metal studs, pairing this brace with steel stud walls often found in commercial or residential framed partitions needing rigid countertop support.
The Fastcap Speed Brace 8x12 primed combines a 1,000 lb per pair load rating with an 8 inch by 12 inch form factor, which gives clear structural capacity and geometry for shelving or countertops. The 1-1/2 inch by 1-1/2 inch notching system for quick alignment and installation supports repeatable bracket placement along framing. Cable management holes, countersunk screw holes, and the option to orient either long or short side further adapt the SB-8X12PRIMED to varied workstations, storage runs, and counters that rely on metal stud framing or similar support.
Sold In: 1 Each
