Deltana solid brass cabinet hinges give a small cabinet door a solid brass pivot point in a compact 1.5 inch by 1.5 inch format, which helps when you need a scaled hinge on lighter doors or smaller frames. The mounting type is full mortise, so the hinge seats flush into the door and frame and keeps the leaf edges clean with the surrounding wood. The corners are square, which suits straight-mortised corners and speeds layout when you are working with chisel-cut recesses. The hinge thickness is .093 inch, giving enough leaf stock for a firm bearing surface at this size. These cabinet hinges are made from solid brass, so the leaves and knuckle use brass material rather than sheet steel. A PVD polished brass finish covers the hinge, providing the polished brass appearance in the PVD version of this model.
This Deltana full mortise cabinet hinge is designed to sit in mortised pockets on both the door and the cabinet frame, so the hinge body occupies recesses rather than overlaying the surface. The square corners on the leaves match mortises that are cut with squared corners, which aligns with layouts where the pocket is taken to the full outline. The .093 inch thickness determines how deep the mortise needs to be, so the recess depth can be matched closely to bring the leaf surface even with the surrounding wood. The hinge uses #7 x 3/4 inch wood screws, so the screw pilot preparation can be chosen with that size in mind. The 1.5 inch by 1.5 inch overall size keeps the mortises compact, which helps when working on narrow cabinet frames or smaller doors.
The CH1515CR003 hinge sits in the semi-concealed hinges product class, so it belongs in applications where part of the hinge is visible and part is mortised into the cabinet. The hinge falls under the full mortise hinges category, which places it in work where both door and frame receive mortises sized to the 1.5 inch by 1.5 inch leaves. Its role as a solid brass cabinet hinge matches cabinet installations where brass hardware is already part of the layout. The hinge uses square corners, so it suits mortises laid out with straight edges rather than radiused router corners. At .093 inch thick, the leaves offer a defined thickness that guides mortise depth on face-frame cabinetry and small furniture doors.
The Deltana solid brass cabinet hinges carry a defined 1.5 inch by 1.5 inch footprint, which gives a predictable template size for repeated mortises across multiple doors on the same run. The full mortise mounting type means each hinge locates in a controlled pocket, which helps keep reveal lines consistent door to door. Square corners on the leaves remove guesswork about corner shape, since the mortise outline follows straight lines that can be laid out with a square and knife. The .093 inch hinge thickness fixes the shoulder depth in the mortise, which supports repeatable fit when you match the recess depth from one opening to the next. The PVD polished brass finish and solid brass cabinet hinge construction tie the visual and material characteristics to the same specification, which supports a uniform appearance across all hinges using the CH1515CR003 part number.
The CH1515CR003 is a Deltana solid brass cabinet hinge in the semi-concealed product class, so part of the hinge shows while the rest sits in mortised pockets.
This Deltana full mortise cabinet hinge mounts in full mortise recesses on both door and frame, so the leaves sit flush with the surrounding cabinet wood.
The hinge measures 1.5 inches by 1.5 inches with .093 inch thickness, so mortise layout and depth follow those dimensions on the cabinet and door.
This Deltana cabinet hinge uses square corners, so it matches mortises laid out with straight edges instead of rounded router corners.
The CH1515CR003 hinge is specified with #7 x 3/4 inch wood screws, so the screw holes in the cabinet and door are sized around that screw designation.
The CH1515CR003 hinge is identified with a PVD polished brass finish, so the visible portions show a polished brass appearance in this PVD version.
The CH1515CR003 Deltana solid brass cabinet hinges pair a 1.5 inch by 1.5 inch footprint with full mortise mounting and square corners, which suits small cabinet doors needing mortised brass pivots. The .093 inch thickness and #7 x 3/4 inch wood screw specification define mortise depth and screw sizing before work begins. The PVD polished brass finish and solid brass construction tie the look and material to brass-focused cabinetry. When a run of cabinets calls for a compact full mortise hinge in polished brass, this Deltana model aligns the dimensions, thickness, and finish to that requirement.