Deltana solid brass cabinet hinges give you a compact 1.5 inch by 1.5 inch hinge that suits small cabinet doors where precise alignment matters. The polished brass finish presents a bright, traditional look that pairs well with other brass hardware in the same run, helping maintain a consistent appearance across a project. As a semi-concealed hinge in the full mortise category, it sits cut into the door and frame, so only the necessary portions remain visible when the door is closed, which helps clean up sightlines on face frames. Ball tip finials are standard on this hinge, so the hinge pin ends contribute a finished detail instead of a raw edge, which is useful on exposed cabinet ends and tall runs where the hinge tops are in view.
This hinge is identified as a full mortise mounting type, so both the cabinet and door receive matching mortises sized to the 1.5 inch by 1.5 inch leaves, helping the door close flush with the frame. The hinge is described as screw-on, and it is specified for use with #7 by 3/4 inch wood screws, which sets clear expectations for pilot hole sizing and grip length into common cabinet materials. The hinge thickness is specified at .093 inch, which guides how deep the mortise cuts should be so the leaves sit level with the surface without leaving a lip at the edge.
This Deltana full mortise cabinet hinge sits in the semi-concealed hinge class, so it suits applications where part of the hinge body is concealed in the mortise and part remains visible, giving a balance between clean lines and visible hardware detail. The 1.5 inch by 1.5 inch dimensions position it for smaller cabinet doors, short face-frame openings, or narrow rails where larger hinges would crowd edge profiles or decorative details. Solid brass construction lets the hinge match other brass hardware when the door is open, which is helpful on cabinets where interior hinges are visible from seating height. The polished brass finish matches traditional and decorative hardware suites, so the hinge appearance can track pulls and knobs throughout a room.
The specified .093 inch hinge thickness gives a clear target for mortise depth, which helps produce a flush fit across multiple doors when working with jigs or hand tools. Square corners on the hinge leaves mean mortises can be cut with straight chisel work or square-cornered templates, reducing layout time on repeated installations. The use of #7 by 3/4 inch wood screws focuses screw selection and pilot sizing around that diameter and length, helping the hinge grip reliably into typical cabinet-grade woods. Ball tip finials arrive as the standard pin detail, so every hinge in a run shares the same decorative profile at the barrel ends, which supports consistent results from one opening to the next.
The CH1515U3 model is a Deltana semi-concealed full mortise hinge, so it sits cut into both door and frame while leaving part of the hinge visible on the cabinet.
The hinge is specified as 1.5 inches by 1.5 inches, which suits smaller cabinet doors and narrow frame members where space is limited at the edge.
The CH1515U3 hinge has a thickness of .093 inch, guiding mortise depth so the leaf sits flush with the door and frame surfaces.
This hinge is specified for #7 by 3/4 inch wood screws, which sets expectations for pilot hole size and thread engagement into cabinet material.
The hinge is described as a solid brass cabinet hinge with a polished brass finish, giving a bright, matching brass appearance when viewed on the cabinet.
This Deltana hinge is noted as having ball tip finials as standard, so each hinge pin terminates in a decorative ball-shaped tip.
The Deltana CH1515U3 hinge combines a 1.5 inch by 1.5 inch footprint, .093 inch thick leaves, and full mortise mounting to support tight, flush-fitting cabinet doors. Solid brass construction with a polished brass finish keeps the hinge visually aligned with other brass hardware. Ball tip finials deliver a finished pin detail that suits more decorative cabinet work. For projects calling for semi-concealed full mortise hinges in polished brass, this model offers a clearly defined size, thickness, and screw specification to plan around.