Deltana solid brass cabinet hinges come in an array of fine finishes with ball tip finials as standard, so each hinge provides a finished look that suits visible cabinet applications. The 1.5 inch x 1.5 inch hinge size keeps the hardware compact, which helps on small cabinet doors where larger hinges would crowd the frame. A brushed chrome finish gives the hinge a muted metallic appearance, which suits modern casework where bright polished surfaces are not desired. The semi-concealed hinge design keeps most of the solid brass body out of sight, while the ball tip finials remain visible as a decorative element on the cabinet. As part of Deltana Enterprises, Inc. cabinet hardware, this hinge aligns with other Deltana pieces on a project, which helps maintain a consistent visual style across multiple doors.
The full mortise mounting type means both the cabinet stile and the door edge need a matching 1.5 inch by 1.5 inch recess, so the hinge leaves sit flush and allow the door to swing without binding. Square corners on the hinge simplify layout when using a straight bit in a router or a square chisel, because the edge of the leaf aligns with clean, straight pocket edges. With four screw holes on the hinge, the installer can drive fasteners at each point to pull the leaf tight into the mortise, which helps keep the door aligned over time. The .093 inch thick solid brass leaves sit solidly in the cutout, so the door seats against the frame without the hinge flexing under normal cabinet use. The specified #7 x 3/4 inch wood screws match the hinge holes, making it straightforward to anchor into typical cabinet materials.
The 1.5 inch x 1.5 inch hinge format suits cabinet doors where a compact full mortise hinge is preferred over larger architectural hinges, helping keep smaller doors proportionate while still supported. As a semi-concealed hinge, most of the solid brass body sits inside the mortise, so only selected elements remain visible and the door face stays clean. The brushed chrome finish works in cabinet runs where a softer metallic tone coordinates with pulls or knobs, tying visible hardware together. Because Deltana solid brass cabinet hinges come in an array of fine finishes, this brushed chrome model can be used alongside other Deltana pieces on the same project for a coordinated appearance. The ball tip finials as standard sit at the hinge ends, giving a finished detail on exposed hinge edges that meets decorative cabinet expectations.
The full mortise mounting type defines clear mortise dimensions, so once a 1.5 inch by 1.5 inch pocket is dialed in, the same setup can be repeated across multiple cabinet doors with consistent results. Square corners on the hinge allow installers to work quickly with straight-edge routing jigs, since every corner is a right angle that matches typical layout tools. The .093 inch hinge thickness gives a firm reference when setting router depth, making it easier to cut pockets so the leaves sit exactly flush with surrounding wood. Four hinge holes provide multiple clamping points as the #7 x 3/4 inch wood screws are driven, which helps pull each leaf fully into the mortise and maintain alignment. The solid brass construction described in the web listing ensures the hinge body itself is metal, giving a predictable seating surface against the cabinet mortise.
The CH1515U26D hinge has a full mortise mounting type, so both the door and cabinet frame receive mortised pockets, allowing the leaves to sit flush and the door to close neatly.
The hinge measures 1.5 inches by 1.5 inches, which suits small to medium cabinet doors where a compact full mortise hinge is needed for proportionate support.
The CH1515U26D hinge has a thickness of .093 inch, giving the solid brass leaves a substantial feel that resists flexing during normal cabinet door operation.
The hinge uses #7 x 3/4 inch wood screws, matching typical cabinet stock depth so the screws bite securely into the material without over-penetrating.
The CH1515U26D hinge has a brushed chrome finish, giving a soft metallic look that pairs well with contemporary cabinet pulls and other brushed hardware.
The hinge is described as a Deltana solid brass cabinet hinge, so the body is solid brass, providing a metal construction suited to typical cabinet hinge use.
Choosing the CH1515U26D Deltana full mortise cabinet hinge brings a 1.5 inch x 1.5 inch solid brass hinge with a brushed chrome finish and ball tip finials into cabinet work. The full mortise, square-corner design pairs well with routed pockets, while four screw holes and .093 inch thick leaves support stable door operation. When a semi-concealed, brushed chrome Deltana hinge aligns with the cabinet layout, this model provides a defined size, material, and mounting style for planning hinge locations.