Deltana solid brass cabinet hinges come in an array of fine finishes with ball tip finials as standard, so this CH1515U10B hinge brings a finished look to exposed cabinet edges where appearance matters as much as movement. The hinge is described as full mortise, which means the leaf sits flush into a routed pocket in the cabinet and door, helping doors sit properly aligned with surrounding faces for a clean, built-in look. Being free swinging allows the hinge to move through its arc without built-in stops, which suits cabinets where the door needs to open and close smoothly to its designed range. The 1.5 inch by 1.5 inch size keeps the hardware compact, helping it fit small cabinet doors or tight face-frame layouts where larger hinges would crowd edges or adjacent components.
The CH1515U10B hinge size of 1.5 inch by 1.5 inch guides the mortise layout on both the cabinet and the door, helping installers size the pockets so the leaves sit fully supported without overcutting. Because the corners are square, routing or chiseling to a crisp 90-degree corner keeps the hinge snug in place, which supports consistent reveals along the door edge. The full mortise mounting type places one leaf into the cabinet and one into the door, creating a flush transition that helps the door close without binding on the frame. The specified .093 inch thickness defines how deep the mortise is cut, aligning the leaf surface with the surrounding material so the hinge knuckles carry the load instead of the door edge rubbing.
This Deltana full mortise hinge is identified as a semi-concealed hinge for cabinets, so it is suited to cabinet installations where most of the leaf is buried in the wood while select details remain visible. The 1.5 inch by 1.5 inch format matches smaller cabinet doors, allowing the hinge to sit neatly on face frames or case sides without crowding nearby doors. The oil rubbed bronze finish is one of the array of fine finishes described for these solid brass cabinet hinges, giving the visible knuckle and ball tip finials a dark, traditional tone that coordinates with similar-finished pulls and knobs. Because the corners are square, the hinge pairs well with straight-template routing on face frames and doors, so the mortises can be repeated across a run of cabinets with a consistent outline.
The full mortise mounting style means each leaf nests into a routed pocket, so once the mortise dimensions are set for the 1.5 inch by 1.5 inch hinge, the same setup can be repeated across multiple doors for uniform gaps. The specified .093 inch hinge thickness keeps the mortise depth consistent, which helps maintain alignment so doors swing freely without the edge dragging on the frame. Square corners reduce layout guesswork, because the hinge outline translates directly to the wood, helping installers cut to the exact footprint without extra fitting steps. The #7 x 3/4 inch wood screw specification aligns with typical cabinet stock thickness, helping the screws grip within the stile or frame and support the free swinging action over time. Ball tip finials are standard on these hinges, so every installed hinge presents a finished profile at the knuckle, which matters when the hinge axis is visible along cabinet faces or inside open-case work.
The CH1515U10B is a Deltana solid brass cabinet hinge described as a full mortise, semi-concealed hinge, so it mounts into routed pockets while leaving select decorative parts visible.
The CH1515U10B hinge measures 1.5 inch by 1.5 inch, which guides mortise layout and suits smaller cabinet doors or tighter face-frame locations.
Square corners on the hinge match straight-edged mortises, so routed or chiseled pockets can follow the hinge outline closely for a snug, gap-free fit.
The CH1515U10B is described as an oil rubbed bronze hinge from an array of fine finishes, providing a dark, traditional tone on the visible hinge parts.
This hinge uses a full mortise mounting type, so each leaf is set into a routed pocket in the cabinet and door, helping the leaves sit flush with surrounding wood.
The hinge specifies #7 x 3/4 inch wood screws, tying the installation to a common screw size that bites effectively in typical cabinet frames and doors.
The CH1515U10B Deltana full mortise cabinet hinge combines a 1.5 inch by 1.5 inch footprint, .093 inch thickness, and square corners, so it supports accurate mortising and clean reveals on cabinet doors. The solid brass construction described in the product information pairs with an oil rubbed bronze finish, presenting a visible knuckle and ball tip finials suited to traditional cabinet styling. With free swinging operation and a specified #7 x 3/4 inch wood screw size, this semi-concealed hinge is set up for straightforward cabinet installations where appearance and consistent door movement are both priorities.