Deltana solid brass cabinet hinges come in an array of fine finishes with ball tip finials as standard, so this CH1515U15 hinge brings a finished look to cabinet doors while maintaining a compact 1.5 inch by 1.5 inch footprint that suits smaller doors and face frames. The satin nickel finish gives the solid brass hinge a muted metallic appearance that coordinates with many modern cabinet pulls and other satin nickel hardware in the same run. As a semi-concealed hinge, it fits projects where you want a clean, understated door presentation while still having visible ball tip finials as a design detail. The solid brass construction provides a dense, weighty feel at the hinge knuckle that supports cabinet door movement on everyday use in kitchens, baths, or built-ins.
The mounting type is full mortise, so both the door and frame receive recesses that match the 1.5 inch by 1.5 inch hinge leaves, giving you a clean joint line when the door is closed. Square corners on the CH1515U15 hinge align with mortising operations cut by straight bits or chisels, which suits shops that already template for square rather than radius corners. With four holes in the hinge, each leaf uses multiple #7 by 3/4 inch wood screw fasteners, spreading load across the stile and frame and helping maintain alignment after repeated opening cycles. The .093 inch hinge thickness defines the depth of your mortise, so once you set your router or chisel to that depth, you can repeat the setting across multiple doors in a run.
This hinge sits in the Semi-Concealed Hinges product class, so it suits cabinet work where part of the hinge remains visible while most of the leaf is buried in the mortise. The 1.5 inch by 1.5 inch size fits small cabinet doors or light casework, where a compact hinge keeps the visual scale balanced with narrow frames. The satin nickel finish works in projects where other hardware shares a similar satin nickel tone, tying the hinge into a coordinated hardware package across doors and drawers. Ball tip finials as standard give the hinge pin area a finished profile, which helps when the knuckle area is visible at the top and bottom of the door. Because the hinge is full mortise, it suits traditional cabinet construction where mortised hinges are part of the build sequence.
The full mortise mounting type on the CH1515U15 hinge means once you dial in a 1.5 inch by 1.5 inch mortise pattern at .093 inch depth, you can cut repeatable pockets across a job, keeping reveals consistent from door to door. Square corners work well when your jigs or CNC are already cutting sharp-corner recesses, eliminating a secondary radius clean-up step that would otherwise add time. The four holes in the hinge distribute clamping pressure from the #7 by 3/4 inch wood screw fasteners, which reduces the chance of the leaf twisting in the mortise under door load. Solid brass cabinet hinges provide a dense base metal under the satin nickel finish, giving the knuckle and leaves a solid feel that helps the hinge swing smoothly. The Deltana Enterprises, Inc. branding and manufacturer part number CH1515U15 give you a specific reference when matching hinges across future cabinet runs.
The CH1515U15 hinge uses a full mortise mounting type, so both the door and cabinet frame receive recesses that match the hinge leaves for a flush, traditional cabinet fit.
The CH1515U15 hinge measures 1.5 inches by 1.5 inches, fitting smaller cabinet doors and narrow face frames where a compact hinge layout is required.
The Deltana CH1515U15 hinge has a thickness of .093 inch, which sets the exact mortise depth needed for the leaves to sit flush with the cabinet surfaces.
The satin nickel CH1515U15 hinge has square corners, aligning with mortises cut by straight bits or chisels where sharp 90 degree corners are preferred.
This hinge is a Deltana solid brass cabinet hinge with a satin nickel finish, combining a brass base metal with a muted nickel tone on visible surfaces.
The CH1515U15 hinge specifies #7 by 3/4 inch wood screw fasteners, matching typical cabinet door and frame thicknesses for good thread engagement.
The CH1515U15 satin nickel hinge from Deltana Enterprises, Inc. combines a 1.5 inch by 1.5 inch full mortise layout, .093 inch leaf thickness, and square corners to support precise cabinet door alignment. Deltana solid brass cabinet hinges with ball tip finials as standard give your work a finished hinge detail, while the satin nickel finish coordinates with many cabinet hardware lines. When a semi-concealed hinge from the Semi-Concealed Hinges product class fits the project intent, this full mortise cabinet hinge delivers a compact format for small doors and face frames.