Omega National 36"W Red Oak Euro Wood Wall Mount Range Hood, Broan Compatible Liner Included - R3336SMB3OUF1
Description
NOTE: As of 4/13/26, Omega National's prefix has changed from NP to RS. This part number has changed from NPR3336SMB3OUF1 to RSR3336SMB3OUF1.
Omega National 36" Red Oak Euro Hood For Walls
Omega National 36" red oak Euro hood gives you a Euro-style wood range hood in a 36" width, so wall cabinet runs can be laid out around a known-size focal point. This hood is built in red oak, which lets finishers stain or clear-coat to match surrounding cabinetry in a typical kitchen job, keeping fronts, moldings, and the hood in the same wood family. The hood is part of Omega National wood range hoods, so it fits projects where a wood-faced solution is preferred over metal units for a continuous cabinet look. As a wall mount range hood, it suits layouts where the cooktop is against a wall, helping designers and installers coordinate upper cabinet heights and hood position as one assembly.
Key Euro Hood Details That Support Your Projects
- The 36" width sets the hood footprint over standard 30" or 36" cooking zones, giving layout predictability when spacing wall cabinets and maintaining consistent reveals over base cabinets.
- Construction in red oak means finish shops can apply stains commonly used on red oak fronts, allowing the hood to visually tie into existing or new red oak cabinet doors and face frames.
- The hood uses Omega National Signature hood chimneys, so designers can carry the same chimney style across different hood widths on a job and still keep a uniform upper profile line.
- Being part of the wood range hoods category, this Euro hood lets projects maintain an all-wood appearance across the wall run, useful where metal hoods would visually break the cabinet flow.
Wall Mount And Hanging Approach For This Hood
This Euro wood wall mount range hood uses a French cleat hanging system, which sets a consistent wall-mount method across installations and helps align the hood squarely with surrounding cabinets. The standard French cleat design gives installers a fixed reference strip on the wall, making it easier to lift the hood into place and seat it securely on the cleat before final fasteners are driven. As a wall mount unit, the hood is intended to be fastened to the wall structure behind, so framing can be planned around the hood centerline during rough-in. With a 36" width and wall mounting, installers can position the hood over the cooking area while aligning its sides with adjacent wall units for a clean, continuous run.
How This 36" Euro Hood Works In Kitchens
Where The 36" Euro Wood Hood Fits Best
This 36" Euro wood wall mount range hood fits kitchen layouts that call for a 36" wide focal hood over a wall-mounted cooktop or range, so cabinet designers can anchor the elevation around that central element. Because it uses standard Signature hood chimneys from Omega National, the hood works in wall runs where chimney sections must reach up toward the ceiling while matching other Omega National hoods on the same project. The red oak construction suits residential kitchens or similar spaces built with red oak cabinets, enabling the finisher to run the same stain or clear finish across doors, frames, and the hood shell for visual consistency. As a Euro wood range hood, it fits designs that want a contemporary wood profile while still coordinating with traditional red oak cabinetry.
Why The Broan-Compatible Liner And Details Matter
This hood includes a silver metallic liner that accommodates all Broan ventilation, so the interior liner is designed to accept Broan ventilators across their Broan ventilation range and give them a finished surface. Using a silver metallic liner inside the wood shell separates the ventilator area from the red oak, which helps keep the visible wood focused on appearance while the liner defines the working cavity for the Broan unit. Because the liner is Broan-compatible across all Broan ventilation, a project can standardize on Broan ventilators while still using this Omega National wood hood shell above, simplifying ventilation choices across multiple kitchens or units. The fact that ventilators are not included means the hood and liner provide the wood and liner structure, while ventilation selection and CFM choices are handled through separate Broan ventilators during specification. Together, the French cleat hanging system and the integrated, Broan-compatible silver metallic liner create a defined sequence: mount the wood hood shell using the cleat, then fit the appropriate Broan ventilator into the liner cavity as part of the mechanical scope.
Common Questions About This Omega National Euro Hood
What type of installation does this 36" Euro hood use?
The hood uses a standard French cleat hanging system, so installers set the cleat on the wall and then hang the hood body on it for secure, repeatable wall mounting.
How does the Broan compatible hood liner affect ventilator choice?
The silver metallic liner accommodates all Broan ventilation, so specifiers can select from the Broan ventilator range while using this wood hood shell above.
What role does the red oak construction play in a kitchen install?
The hood is built in red oak, allowing finishers to stain or clear-coat it to coordinate with red oak doors, frames, and other cabinetry elements on the same wall run.
How does the 36" width influence cabinet layout?
The 36" width sets a defined center section over the cooking area, helping designers space adjacent wall cabinets and align door widths around a consistent hood dimension.
What does it mean that ventilators are not included with this hood?
The hood and its silver metallic liner provide the wood shell and liner cavity, while the actual Broan ventilator unit is specified and sourced separately for each project.
How do Signature hood chimneys factor into using this model?
This hood uses Omega National Signature hood chimneys, so projects using multiple hood widths can still keep a consistent chimney style and visual line across the room.
Selecting This 36" Hood For Red Oak Projects
This Omega National 36" red oak Euro wood wall hood, part number R3336SMB3OUF1, brings together a red oak shell, standard Signature hood chimneys, a silver metallic liner, and a French cleat hanging system for planned, repeatable installs. The liner accommodates all Broan ventilation, so mechanical specifications can rely on Broan ventilators while millwork and finishing teams work with a familiar red oak hood structure. For projects where a 36" focal hood, red oak cabinetry, and Broan ventilation are planned together, this model offers a coordinated path from cabinet layout through hood mounting and ventilator fit.
