KV4450 12" Full Extension Soft-Close Ball Bearing Drawer Slides, Unhanded Side Mount Zinc Bulk-Pack - 4450B 12

Knape And Vogt 4450B 12 Drawer Slides For Smooth Use

Knape and Vogt 4450B 12 drawer slides provide a 12 inch full extension action, so drawers travel their full depth and give clear access to stored items during cabinet work. The soft-close function, identified in the 12' SOFT CLOSE LOW PROFILE SLIDE description, pulls the drawer shut in a controlled motion, which helps reduce slamming in everyday shop and residential use. These slides are side mount, so they install along the drawer sides and cabinet case in typical side-mount layouts. The ball bearing design described in the product name supports a smooth running action, which matters when drawers are opened and closed repeatedly. The slides are unhanded, so the same member can be used on either side of the drawer, simplifying inventory and layout on multi-drawer runs. The zinc finish noted under available finishes provides a standard metal appearance suitable for many cabinet interiors.

Key Slide Details That Support Cabinet Builds

• The full extension design identified in the product name lets the 12 inch slides carry drawers out to their full length, which helps during installation checks and day-to-day access.
• The soft-close wording in the SAP Description 12' SOFT CLOSE LOW PROFILE SLIDE indicates a controlled closing action, which matters where quieter operation is valued.
• The Web Description notes a side clearance of 1/2 inch plus, 1/32 inch minus, 0 inch each side, giving a defined clearance window that guides drawer box sizing.
• The stated height of 1-13/32 inch sets the slide profile, so cabinetmakers can confirm vertical space around the drawer members.
• The maximum drawer width of 24 inch noted in the Web Description describes an upper width guideline for drawers using these slides, keeping drawer proportions within the slide design intent.
• The zinc finish listed under Available finishes: Zinc provides a metal surface suited to typical cabinet environments where a straightforward, clean appearance is preferred.

Side Mount Installation And Fastener Pattern Details

The product class Side Mount Drawer Slides and the Web Description confirm a side mount layout, so each member aligns on the drawer side and cabinet side panel. The 32 mm Pattern: Yes detail establishes that the slide drilling follows a 32 mm system pattern, which supports consistent hole spacing in cabinets built around that system. Recommended Fasteners: #6 x 7/16 inch Phillips Pan Head ties the slide to a specific screw size and head style, which guides material selection when fastening to drawer boxes and cabinet sides. The side clearance value of 1/2 inch plus, 1/32 inch minus, 0 inch each side gives a numeric target during installation, helping drawers run smoothly within the hardware tolerances.

Using 12 Inch 4450 Series Slides In Projects

Where These 12 Inch Side Mount Slides Fit Best

The 12 inch length in KV Model #4450 12 Length suits shorter drawers, such as upper cabinets or shallow base cabinets, where depth is limited. The maximum drawer width of 24 inch described in the Web Description indicates a width range suited to narrower and mid-width drawers built around this slide length. Being part of the 4450 Series, these slides align with that series performance profile for side mount, ball bearing slides, so they can be used alongside other lengths from the same series in a project when matching function is desired. The 1-13/32 inch height keeps the slide profile relatively compact, which helps fit the hardware in tighter side clearances within smaller cabinet boxes.

Why These Slide Details Support Repeatable Drawer Results

The 1/2 inch plus, 1/32 inch minus, 0 inch each side clearance listed in the Web Description gives a specific sizing target, which supports consistent drawer construction when repeating the same cabinet design. The 32 mm Pattern: Yes detail matches drilling layouts based on the 32 mm system, so hole positions on case sides can be coordinated with other system hardware. The push button release, stated under Features, allows the installer to separate drawer and cabinet members during fitting, which helps with adjusting drawer boxes before final engagement. The hold-in detent feature in the Web Description helps keep the drawer in the closed position until intentionally opened, which is useful in day-to-day use of cabinets that are opened frequently. The Recommended Fasteners: #6 x 7/16 inch Phillips Pan Head note gives a defined screw size, simplifying fastener selection when setting up for production or repeat installations.

Common Questions About Knape And Vogt 4450B 12 Slides

Select Knape And Vogt 12 Inch Slides For Defined Fit

Choosing Knape and Vogt 12 inch drawer slides with full extension and soft-close action ties your project to defined dimensions and functions. With 1/2 inch plus, 1/32 inch minus, 0 inch side clearance, 1-13/32 inch height, 24 inch maximum drawer width, and 32 mm Pattern: Yes, these 4450 Series side mount, ball bearing slides give installers clear parameters for drawer sizing and layout in cabinets built around the 4450B 12 model.