KV4450 22" Full Extension Soft-Close Ball Bearing Drawer Slides, Unhanded Side Mount Zinc Bulk-Pack - 4450B 22

Knape And Vogt 22 Inch Drawer Slides For Cabinets

Knape and Vogt 22 inch drawer slides 4450B 22 give you a full extension, so the drawer travels its entire length and exposes the full 22 inch depth, which helps installers deliver easy access to stored contents in everyday cabinet use. The soft-close action described in the SAP text as a soft close low profile slide is designed to control closing travel, which supports quieter operation and a more controlled shut on completed installations. The side mount design listed in the product name sets the slide against the cabinet side, which suits standard face frame and frameless cabinet construction that is already built around side-mounted hardware. A ball bearing construction stated in the category provides a rolling interface between drawer member and cabinet member, which supports smoother motion under load compared to simple friction slides. The unhanded description in the product name means the same slide design works on either side, which simplifies layout and reduces sorting time on the job.

Key 4450B 22 Details That Support Installers

• The web description notes KV Model #4450 in a 22 inch length, which aligns slide travel with a 22 inch drawer box depth and helps installers coordinate drawer construction dimensions with hardware selection.
• The side clearance specification of 1/2 inch plus or minus 1/32 inch zero each side gives a defined gap for each drawer side, which guides cabinet and drawer sizing so slides seat properly without binding or excessive play.
• The stated height of 1-13/32 inch sets the vertical space the slide requires, which lets woodworkers plan drawer box side heights and clearances around the slide envelope for smooth operation.
• The maximum drawer width listed as 24 inches sets an upper limit for drawer box span, which helps keep performance within the design envelope when planning wider drawers in kitchen, bath, or shop cabinetry.
• The available zinc finish documented in the description defines the metal surface coating, which supports a clean, neutral appearance that coordinates with common cabinet interiors.
• The 32 mm pattern notation indicates a hole pattern based on the 32 mm system, which helps installers align drilling and layout with standard cabinet construction methods that already use that system.

Side Mount Drawer Slide Fit And Installation

The unhanded side mount design described in the product name allows the Knape and Vogt 4450B 22 slides to be mounted on either the left or right cabinet wall, which simplifies installation steps and reduces orientation errors during assembly. The side clearance callout of 1/2 inch plus or minus 1/32 inch zero each side sets a precise lateral relationship between drawer and cabinet, which supports proper engagement of the ball bearings during opening and closing. The specified height of 1-13/32 inch gives a fixed vertical envelope for the slide, which helps installers choose drawer side heights that clear the slide and adjacent components in tight stacks. The recommended fasteners listed as #6 x 7/16 inch Phillips pan head give both shank diameter and head style, which guides fastener selection for secure mounting into typical cabinet materials.

Using 4450B 22 Slides In Cabinet Projects

Where KV 4450B 22 Drawer Slides Are Applied

The product class defined as side mount drawer slides places the Knape and Vogt 4450B 22 in applications where drawers ride along cabinet sides, which covers many kitchen, bath, office, and shop cabinet layouts designed around lateral guides. The maximum drawer width of 24 inches noted in the web description supports use on moderate-width drawers, which suits typical base cabinet drawers that store tools, hardware, or household items. The full extension behavior stated in the product name means the slide length and travel are matched, which allows drawers built to a 22 inch depth to open fully for direct reach to the back. The soft-close function referenced in the SAP description as a soft close low profile slide supports gentler closing behavior, which suits spaces where controlled closing is valued.

Details That Help Deliver Repeatable Slide Results

The stated side clearance of 1/2 inch plus or minus 1/32 inch zero each side provides a numeric tolerance range, which lets cabinetmakers cut drawer box widths consistently so slides track straight without racking. The 32 mm pattern reference signals alignment with 32 mm system hole spacing, which allows installers using line-boring equipment or system hardware jigs to position mounting points quickly and repeatably. The unhanded design and side mount orientation described in the product name reduce part differentiation, which simplifies stocking a single slide type for both sides of the cabinet. The recommended #6 x 7/16 inch Phillips pan head fasteners help define both bite depth and head profile, which supports a flush seating of the slide against wood components when installed into common cabinet substrates.

Common Questions About 4450B 22 Drawer Slides

Selecting KV 4450B 22 Slides For Your Project

The Knape and Vogt 4450B 22 combines a 22 inch full extension length, soft-close behavior, and a side mount, unhanded layout, which fits cabinet projects built around standard side-mounted drawers. The specified side clearance of 1/2 inch plus or minus 1/32 inch and the maximum drawer width of 24 inches provide concrete layout targets, which support consistent drawer construction from one cabinet run to the next. The zinc finish, 32 mm pattern notation, and recommended #6 x 7/16 inch Phillips pan head fasteners give additional detail, which helps align this slide with existing shop processes when planning your next installation.