Knape And Vogt 16 Inch Soft Close Drawer Slides

Knape and Vogt 16 inch soft close drawer slides give a 16 inch full extension stroke, so drawers travel their full length and contents remain accessible from front to back. The soft close function in these ball bearing slides slows the last part of travel and pulls the drawer closed, which reduces slamming and helps protect drawer fronts over repeated use. The 4450 series design is a side mount drawer slide, so it installs along the cabinet side, leaving the drawer bottom clear for standard construction methods. The slide height of 1-13/32 inches sets a predictable profile, helping you size drawer side material and locate clearances in cabinet openings. An unhanded design lets either member work on left or right sides, simplifying layout when building or replacing drawers.

Key Slide Details That Support Cabinet Work

• The KV model 4450 in 16 inch length is a ball bearing side mount slide, so drawers move on rolling bearings and track straight under normal cabinet loads, which supports smooth operation in everyday use.
• A side clearance of 1/2 inch plus, 1/32 inch minus, 0 inch on each side defines the gap between drawer and cabinet, so you can size drawer boxes accurately and reduce fitting time during installation.
• The maximum recommended drawer width of 24 inches ties slide use to a defined cabinet opening, guiding when this slide suits a project and helping limit racking on wider drawers.
• The stated height of 1-13/32 inches sets how much vertical space the slide occupies, so you can align it with drawer grooves, face frames, or stretchers without unexpected interference in stacked drawer banks.
• The zinc finish on the slide components provides a uniform metal surface, which supports a clean appearance in utility cabinets and helps the slide blend with other zinc-coated drawer hardware in a run.

Installation And Mounting Details For 4450B 16

The 4450B 16 drawer slide uses a 32 mm pattern, so hole spacing lines up with common system-bored cabinet sides and jigs, speeding layout in shops using line boring equipment. A push button release feature separates the drawer member from the cabinet member, which lets you mount each piece to its surface and then reconnect them during installation or removal. The hold-in detent feature at the back of travel resists the drawer drifting open, which matters where slight cabinet out-of-level conditions exist. Recommended fasteners are #6 x 7/16 inch Phillips pan head, so you can match screw length and head style to the slide design and achieve firm attachment without projecting heads interfering with travel.

Using These Soft Close Slides In Cabinet Projects

Where This 16 Inch 4450 Slide Performs Best

The KV model 4450 in a 16 inch length suits drawers that need a 16 inch full extension stroke, such as typical kitchen or bath base cabinets sized to that depth. With a maximum drawer width of 24 inches, this slide supports medium-width drawers found in many face frame and frameless cabinet layouts, keeping side loads within the slide design. The side clearance requirement of 1/2 inch plus, 1/32 inch minus, 0 inch per side defines the drawer box outside width, so you can dimension parts to slide specifications rather than adjusting during fitting. The unhanded side mount configuration allows the same slide style to be used on either side of the drawer, which helps streamline inventory and reduces sorting during assembly.

Details That Support Repeatable Fit And Operation

The 1-13/32 inch slide height provides a consistent reference when designing drawer side heights and locating mounting positions, which is useful when repeating a bank of drawers across a project. The 32 mm pattern aligns mounting holes with system rows, reducing layout measurements and helping keep slides square and parallel, which supports smooth ball bearing movement over the full extension. The soft close feature works with the hold-in detent to control the last segment of travel and seated position, so drawers tend to close to the same point every time, improving alignment of fronts along a cabinet run. The push button release enables quick drawer removal based on a simple actuation, which can aid finishing, transport, or service work where drawers need to come out and be reinstalled without disturbing slide alignment.

Common Questions About 4450B 16 Drawer Slides

Selecting This 16 Inch Soft Close Slide

The Knape and Vogt 4450B 16 soft close low profile slide combines a 16 inch full extension stroke, 1/2 inch side clearance, and 24 inch maximum drawer width, giving clear parameters for cabinet design. With a 32 mm pattern, push button release, and hold-in detent, it supports repeatable mounting and consistent drawer position in everyday use. For projects that align with these dimensions and mounting details, this 16 inch soft close side mount slide offers a defined solution for planning drawer boxes and cabinet openings.