Knape And Vogt 14 Inch Soft Close Drawer Slides

Knape and Vogt 14 inch soft close drawer slides use the 4450 Series full extension ball bearing design, so the drawer travels its full length and the slide supports smooth motion through the entire stroke. The soft-close function is built into this 4450B 14 model, so the drawer is pulled shut gently at the end of travel, which helps control impact at the cabinet face. This unhanded side mount slide installs on either side of the drawer, which simplifies ordering and layout for banks of drawers. The slide height is 1-13/32 inches, giving a low profile that helps in tight vertical clearances under shallow drawer boxes. The specified maximum drawer width of 24 inches provides a clear sizing limit when planning cabinet layouts. The zinc finish on this 4450 Series slide presents a clean metallic surface, which suits typical shop and cabinet environments.

Key 4450B 14 Details For Drawer Projects

• The full extension design on this Knape and Vogt 4450 14 inch slide allows the drawer to open its complete length, which exposes the full drawer interior for easier access to stored items during everyday use.
• The soft-close feature on this 4450B 14 slide slows and pulls the drawer closed at the end of travel, which reduces slamming at the cabinet front and can help limit wear on front joints over repeated openings.
• The 1-13/32 inch height keeps this slide in a low profile category, which helps when fitting slides under shorter drawer sides or working around existing clearances in retrofit cabinetry.
• The maximum drawer width rating of 24 inches sets a clear design boundary, which helps during planning so drawers stay within the size range the slide is intended to support.
• The zinc finish on this Knape and Vogt 4450 Series slide provides a uniform metal surface, which aligns with common cabinet shop expectations for appearance in utility and residential drawer applications.

Side Mount Fit, Clearance, And Fastener Pattern

This Knape and Vogt 4450B 14 slide is a side mount model, so it locates along the drawer sides rather than under the drawer, which matches standard cabinet construction using side-mounted hardware. The side clearance specification is 1/2 inch plus, 1/32 inch minus, zero inches each side, so the drawer and cabinet should be sized around that side space to match the slide geometry. The 32 mm pattern noted for this slide means its hole layout follows the 32 millimeter system, which helps align with cabinet rows bored on that spacing. Recommended fasteners are #6 x 7/16 inch Phillips pan head screws, so the slide holes and material thickness are oriented around that screw size.

Using 4450 Series Slides In Real Projects

Where The 4450B 14 Slide Works Best

The Knape and Vogt 4450B 14 full extension side mount slide fits drawer boxes designed for a 14 inch slide length, so it works in cabinets where that depth matches the case interior. The side mount configuration suits face frame or frameless construction that uses slides fastened along the cabinet sides, making it adaptable to common shop methods. With a maximum drawer width of 24 inches, this slide fits medium-width drawers such as utility, kitchen, or shop drawers built within that span, keeping the slide working within its intended envelope. The low profile 1-13/32 inch height allows use under shorter drawer sides, so it can be applied in shallow top drawers or tight vertical spaces where taller slide bodies would conflict with the box. The zinc finish fits typical indoor cabinet environments, aligning with standard hardware finishes seen in many residential and commercial projects.

Details That Support Consistent Installation Results

The 4450 Series full extension design on this Knape and Vogt slide means the drawer travel equals the slide length, which simplifies layout because the 14 inch nominal length directly relates to how far the drawer will project from the cabinet front. The defined side clearance of 1/2 inch plus, 1/32 inch minus, zero inches each side gives a clear target for sizing drawer width against the opening, which supports repeatable builds across multiple drawer units. The 32 mm pattern provides a hole layout that lines up with 32 millimeter system boring, so cabinet shops using system rows can position the slides without custom drilling. The unhanded configuration allows the same 4450B 14 slide to be used on either left or right side, which streamlines inventory and reduces part differentiation during assembly. The push button release feature on this slide allows separation of drawer member and cabinet member, which can simplify finishing, transport of drawer boxes, and on-site installation or removal in tight spaces. The hold-in detent feature keeps the drawer in the closed position at rest, which helps drawers stay seated when the cabinet is moved or when fronts are aligned across a run.

Common 4450B 14 Drawer Slide Questions

Selecting This 14 Inch 4450B 14 Slide

The Knape and Vogt 14 inch full extension soft-close ball bearing 4450B 14 slide combines side mount installation, 1-13/32 inch low profile height, 24 inch maximum drawer width, and a defined side clearance range, so it aligns with cabinet projects built around those dimensions and layout patterns.