Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Amerock Bar Pulls 96mm gunmetal describes a cabinet handle from the Amerock Bar Pulls Series with a 3-3/4 in (96 mm) center-to-center hole spacing, so it works where that specific drilling pattern is already laid out. The pull is made of carbon steel, giving the handle a solid metal construction that supports dependable use on frequently opened doors and drawers. Its gunmetal finish provides a dark, modern look that suits straightforward, contemporary cabinet designs where a neutral metallic tone is preferred. The pull measures 6-1/8 in (156 mm) in overall length, which spreads the visual weight across the front of the cabinet for a clean, linear appearance. A projection of 1-3/8 in (35 mm) creates space for fingers to wrap behind the bar, helping with a comfortable grip during daily operation. A width of 1/2 in (13 mm) and base diameter of 3/8 in (10 mm) keep the profile slim while still defining clear contact points on the cabinet face.
The 3-3/4 in (96 mm) center-to-center measurement on this Amerock BP40516GM bar pull sets the exact distance between mounting holes, guiding hole drilling when adding pulls to new cabinet fronts. Its overall 6-1/8 in (156 mm) length helps with consistent alignment by giving a clear bar to reference against door or drawer edges. The 1-3/8 in (35 mm) projection defines how far the pull extends off the surface, which matters when planning for door swing clearances near walls or adjacent cabinets. A width of 1/2 in (13 mm) and base diameter of 3/8 in (10 mm) provide predictable footprint dimensions, supporting accurate layout when repeating the same handle across a full kitchen, bath, or shop installation.
This Amerock Bar Pulls Series handle uses a 3-3/4 in (96 mm) center-to-center spacing, so it aligns with drilling set to that standard measurement on cabinet doors and drawers. When installing multiple pulls, repeating the 96 mm spacing across all fronts supports a uniform handle pattern that looks planned rather than improvised. The 6-1/8 in (156 mm) overall length also helps bridge wider drawer faces, so the handle does not visually get lost on larger surfaces. With a 1/2 in (13 mm) width, the bar keeps its profile lean, which is useful when placing it on narrower rails or smaller doors where excess bulk could crowd the design. The 3/8 in (10 mm) base diameter defines compact footprints at each mounting point, which is helpful when laying out pulls near panel edges or decorative profiles that demand precise placement.
The carbon steel construction of this Amerock carbon steel cabinet pull provides a solid metal body, which supports steady hand-feel on doors and drawers that see repeated use in kitchens, baths, or shop cabinets. Its gunmetal finish gives the pull a dark, straightforward appearance that works with modern and transitional styles, helping hardware blend with fixtures that share similar tones. The 1-3/8 in (35 mm) projection creates room behind the bar, giving fingers a defined space to grab, which is important when users have larger hands or when doors are opened many times a day. The 1/2 in (13 mm) width balances that projection with a slim front profile, so the handle does not protrude visually even though it stands off enough for a full grip. Together, these dimensions and the carbon steel material support a handle that feels substantial without appearing bulky on the cabinet face.
The BP40516GM pull has a 3-3/4 in (96 mm) center-to-center, 6-1/8 in (156 mm) overall length, 1-3/8 in (35 mm) projection, 1/2 in (13 mm) width, and 3/8 in (10 mm) base diameter, guiding cabinet layout.
This Amerock cabinet bar pull is made of carbon steel, giving it a solid metal construction that supports firm hand-feel on frequently used cabinet doors and drawers.
The Amerock BP40516GM pull uses a gunmetal finish, providing a dark metallic look that coordinates with modern fixtures and appliances in the same tone family.
The 3-3/4 in (96 mm) center-to-center spacing matches a common drilling pattern, simplifying layout when positioning multiple pulls across doors and drawers with that measurement.
The 1-3/8 in (35 mm) projection stands the pull off the surface, creating hand clearance behind the bar so fingers can grip without scraping against the cabinet face.
This gunmetal bar pull has sleek, straightforward lines and a dark metallic finish, suiting modern or contemporary cabinet designs that favor clean geometry and simple hardware.
The Amerock Bar Pulls 96mm gunmetal handle brings a 3-3/4 in (96 mm) center-to-center layout, carbon steel construction, and a gunmetal finish together for straightforward cabinet hardware runs. Its 6-1/8 in (156 mm) overall length and 1-3/8 in (35 mm) projection support both grip comfort and visual balance across doors and drawers. For projects built around the 96 mm drilling standard and a modern, linear look, this BP40516GM pull offers dimensions and styling that stay consistent from one cabinet front to the next.
Sold In: 1 Each
