Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Amerock Bar Pulls 192 mm center to center defines this carbon steel pull as a straightforward option for cabinets or drawers that are drilled on a 192 mm (7-9/16 in) spread, so it matches existing hole spacing on those fronts. The pull is part of the Bar Pulls Collection, which sets an expectation of clean, simple geometry that suits modern cabinet layouts. Its gunmetal finish creates a dark, muted surface, which visually grounds lighter cabinet colors and reduces glare under task lighting. The 9-15/16 in (252 mm) overall length stretches across wider drawer fronts, helping distribute the pulling force across more of the front. A projection of 1-3/8 in (35 mm) holds fingers away from the cabinet face, which helps when operating heavier drawers. A width of 1/2 in (13 mm) keeps the grip slim, which works well on tight banks of drawers.
The 7-9/16 in (192 mm) center-to-center drilling dimension defines the mounting layout, so holes must be spaced exactly on that center distance for the bar to sit square. The 3/8 in (10 mm) base diameter indicates how much footprint each post has on the cabinet face, which guides where to position the pull on narrow rails and stiles. With a 1-3/8 in (35 mm) projection, doors swing without knuckles hitting the edge, which matters on high-traffic cabinets. The 9-15/16 in (252 mm) overall length lets the installer span more of a wide drawer, offering multiple hand positions along the bar. Carbon steel construction gives a rigid structure at the posts, which helps the pull stay stable when fastened through standard cabinet fronts.
The Amerock Corporation BP40518GM pull, from the Bar Pulls Collection, suits cabinets or drawers that match its 192 mm (7-9/16 in) center-to-center drilling, so it aligns with longer contemporary fronts. The 9-15/16 in (252 mm) overall length covers a good portion of wide kitchen drawers, pantry doors, or utility cabinets, tying them together visually when used in runs. Its gunmetal finish coordinates with other dark decorative hardware and moldings, keeping a consistent tone across a project. The 1/2 in (13 mm) bar width stays visually slim, which is useful on narrow drawer faces where oversized pulls would crowd the design. With a 3/8 in (10 mm) base diameter, each post sits neatly on typical face-frame or frameless door rails without overhanging edges.
The defined 7-9/16 in (192 mm) center-to-center measurement lets installers build or drill jigs for repetitive runs, keeping hole placement consistent from cabinet to cabinet. Matching the 9-15/16 in (252 mm) overall length to drawer widths creates a repeatable proportion rule, which speeds layout decisions for large banks of drawers. The 1-3/8 in (35 mm) projection gives a known standoff, so installers can plan for door clearances and hand room at adjacent walls or appliances. Carbon steel construction provides a predictable feel at the mounting posts, helping the pull sit flush when snugged to common cabinet materials. The gunmetal finish offers a stable color reference point, which simplifies coordinating other decorative hardware and moldings from the same job.
The BP40518GM pull matches a 7-9/16 in (192 mm) center-to-center drilling, so it fits doors or drawers laid out on that exact hole spacing.
The Amerock gunmetal pull has a 9-15/16 in (252 mm) overall length, giving it reach across wider drawer fronts or tall doors.
The handle projects 1-3/8 in (35 mm) from the cabinet surface, creating finger clearance for gripping without contacting the door or drawer face.
The Amerock Bar Pulls Series handle is made from carbon steel, giving it a solid metal structure at the posts and grip bar.
The BP40518GM bar pull has a gunmetal finish, providing a dark, subdued appearance that pairs with modern cabinet styles.
The grip area is 1/2 in (13 mm) wide, offering a slim profile that suits tight drawer groupings and streamlined cabinet designs.
The BP40518GM Amerock Bar Pulls 192 mm center to center layout serves projects where a long, consistent pull line is wanted across doors and drawers. Its 9-15/16 in (252 mm) overall length, 1-3/8 in (35 mm) projection, and gunmetal finish combine to support modern cabinet runs that use carbon steel pulls as a visual and functional element. For work calling for a 7-9/16 in (192 mm) drilling pattern in a dark finish, this handle aligns with that specification.
Sold In: 1 Each
