Amerock Bar Pulls Series Gunmetal 12" (305 mm) Center to Center Appliance Pull, -BP54008GM

Amerock Bar Pulls Appliance Pull For Appliances

Amerock Bar Pulls appliance pull is a carbon steel handle designed for appliance applications where a 12 inch (305 mm) center-to-center mounting layout is required, so it aligns with standard wide-panel drilling patterns on appliance fronts. The bar pull has a total length of 14-5/8 inches (371 mm), giving extra grip span beyond the mounting points, which helps when operating larger doors or panels. A 2 inch (51 mm) projection sets the handle off the surface, providing hand clearance during use while keeping the handle profile compact for tight cabinetry runs. The 3/4 inch (19 mm) width creates a solid, continuous bar that spreads pulling forces along the handle, which supports repeated operation on heavy-use appliance fronts. The Amerock Corporation Bar Pulls Collection design uses clean lines and smooth textures, so it fits modern installations where straightforward, geometric hardware is preferred.

Key Bar Pull Details For Practical Use

• The 12 inch (305 mm) center-to-center dimension establishes the drilling pattern, which simplifies layout when matching existing appliance fronts or planning new panel drilling on wide doors.
• The 14-5/8 inch (371 mm) overall length extends beyond the screw locations, which provides additional grasp area for hands and can help distribute pull forces along more of the handle.
• The 2 inch (51 mm) projection sets the handle off the surface, which creates working clearance for fingers during pulling while keeping the handle close enough to cabinet faces to limit snag points.
• The 3/4 inch (19 mm) width gives the bar a substantial profile, which helps the handle feel stable under load and supports a consistent pulling surface across the full length.
• The carbon steel material forms a rigid structure, which supports the straight bar design and helps the handle resist flexing during repeated door and panel operation.
• The gunmetal finish defines the surface appearance, which lets the pull visually coordinate with other gunmetal-finished decorative hardware in the same installation.

Appliance Pull Sizing And Mounting Details

This Amerock Corporation Bar Pulls Series appliance pull uses a 12 inch (305 mm) center-to-center mounting span, so hole drilling is laid out based on that fixed distance between fastener points. With an overall length of 14-5/8 inches (371 mm), the bar extends past the mounting holes on both sides, which influences where the handle edges land relative to panel edges or adjacent hardware. The pull projects 2 inches (51 mm) from the mounting surface, setting the bar at a consistent standoff that shapes how hands engage the handle on appliances. A width of 3/4 inch (19 mm) defines the gripping surface thickness, affecting both visual scale and how the pull seats against the door or panel face.

Using This Carbon Steel Gunmetal Appliance Pull

Where This Amerock Bar Pulls Series Fits

The Amerock Bar Pulls Series gunmetal appliance pull belongs to the Appliance Pulls product class, so it is intended for appliance-front and similar large-door installations where a longer handle is typical. The 12 inch (305 mm) center-to-center dimension sets it up for applications that specify this wider mounting span, such as tall panels or wide fronts that benefit from a long gripping area. With a total length of 14-5/8 inches (371 mm), the handle visually anchors larger surfaces, which suits full-height or oversized fronts that would look underscaled with shorter pulls. The gunmetal finish aligns with modern decorative hardware and moldings, allowing this pull to coordinate within contemporary cabinet layouts that use darker, metal-toned hardware across doors and fronts.

Why These Dimensions Support Consistent Results

The 12 inch (305 mm) center-to-center spacing gives installers a fixed drilling reference, supporting repeatable hole placement when multiple appliance pulls from the Amerock Bar Pulls Series are used in the same project. The 2 inch (51 mm) projection creates a predictable standoff from the surface, which helps maintain consistent hand clearance across a run of appliance fronts and related cabinetry. A 3/4 inch (19 mm) width establishes a uniform bar thickness, so the handle presents the same grip feel along its entire 14-5/8 inch (371 mm) length. The carbon steel material under the gunmetal finish provides a solid base for the straight bar geometry, supporting consistent alignment between the two mounting points once secured. Together, the defined dimensions and material support repeatable placement, similar appearance from unit to unit, and a uniform operating feel on appliance fronts designed around this pull.

Common Questions About The Amerock Appliance Pull

Select This Pull For 12 Inch Appliance Layouts

The Amerock Bar Pulls appliance pull with 12 inch (305 mm) center-to-center spacing, 14-5/8 inch (371 mm) overall length, and 2 inch (51 mm) projection gives a defined layout for appliance-front installations. The carbon steel construction and gunmetal finish from Amerock Corporation tie into modern decorative hardware and moldings, supporting a unified look across cabinetry and appliances. For projects built around a 12 inch mounting span and a straight, 3/4 inch (19 mm) wide bar profile, this BP54008GM appliance pull from Wurth Baer Supply aligns functional sizing with a clean, modern appearance.